JBL Xtreme 2
|Maximum music playing time (hrs)||15|
|Output power (W)||2 x 20W RMS Bi-amp|
|Dynamic frequency response range (Hz)||55Hz–20kHz|
|Dimensions (cm)||28.7 x 13.7 x 10.7|
|Dimensions (in)||11.3 x 5.4 x 4.2|
Control Connect Specifications
|Bluetooth profiles||A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2|
|Bluetooth frequency||2.402 – 2.480GHz|
|Bluetooth transmitted modulation||GFSK, π/4 DQPSK, 8DPSK|
|Bluetooth transmitter power||0-12.5dBm|
Documents & Downloads
Quick Start Guide
What’s in the Box
- 1 x JBL XTREME 2
- 1 x Power adaptor
- 1 x Strap
- 1 x Quick-Start Guide
- 1 x Safety Sheet
- 1 x Warranty Card
FAQs & How-Tos
Connection issues using PartyBoost or Connect+
If there are drop out or connection issues when using PartyBoost or Connect+, it could be one of three things.
1. Units are too far apart (move units closer together)
2. Interference from other 2.4gHz wireless units in the area.
3. Unit is no longer working as designed
Here are some steps to isolate the issue:
Try taking the units out of the house and test it outside with no interference to see if you still experience connectivity issues. If you still experience connectivity issues, please try steps below:
Whatever unit drops off, remove that from the chain. Test the rest of the speakers and keep doing it until you find the speaker that is causing the drop outs. If all speakers begin to drop off, please try a different order and repeat. Repeat this process with each unit being the “main speaker”.
Make sure to turn off all WiFi/RF devices. (Router, laptop, baby monitor, Nest cams, IP cams, WiFi switches, WiFi outlets, WiFi lights, cordless phones, etc.)
You should be able to identify the issue/speaker by following these steps.
Changing the name of the speaker1. In order to change the name of the speaker, you must first connect your speaker via Bluetooth and then download the JBL Connect app.
2. Once the app is downloaded choose app and wait for it to recognize your device.
3. Now that your speaker is highlighted, choose the gear located either below or to the right of the speaker image.
4. Once you choose the gear you will have the option to edit the name by clicking on the small pencil icon.
5. After you change the name, you will see a notification stating to "Reconnect to Apply New Name"
6. Go to your Bluetooth settings select "Forget This Device" and then reconnect to establish the new speaker name.
Upgrading the software on your PartyBoost or Connect+ Speaker
Software updates for your speaker can be done using the JBL Portable app.
Download it from the Apple App store and Google Play store.
If there is an available update, look for the small red dot above the gear icon and follow the download instructions (see image below).
If you have an issue with your device it is always worth checking if there is a Software update available and performing the installation if there is.
Sound Distortion After Immersing Speaker in WaterIf you experience any sound distortion after immersing your speaker in water, simply shake the speaker to get rid of any excess moisture and allow the speaker to completely dry. Once dry, the sound quality should return to normal.
Audio distortion or drop outs while using JBL PartyBoost or Connect+
If you are having trouble with distortion or drop out, try the following suggestions:
Move the audio source closer to the speakers
Move the speakers closer to each other
Make sure the streaming speaker (host) only connects to one audio source, disconnect the Bluetooth connection between the streaming speaker (host) and other audio source
Make sure the audio source only connects with one streaming speaker (host), disconnect the Bluetooth connection between the audio source and other speakers
Restart both your speakers and the audio source
Make sure speakers are away from other sources of wireless signal – you could be experiencing interference
Re-pair the audio source with your speaker
If you’re streaming audio content from the internet, the issue could be with the internet connection and not your speaker
Waterproof Information (IPX7)
This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.
PartyBoost support on the JBL Connect and JBL Connect+
The new PartyBoost does not support the previous Connect and Connect+ features. For example: You will not be able to successfully connect the new PartyBoost enabled Flip 5 with a Connect+ enabled speaker like the Pulse 3 or Flip 4. You will not be able to connect the Boombox 2 to the original Boombox speaker.
Can’t find what you’re looking for?
Talk to a product expert
Call us now at: (800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)
Chat With Us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)