JBL Xtreme 2

If you are having trouble with distortion or drop out, try the following suggestions:

Move the audio source closer to the speakers

Move the speakers closer to each other

Make sure the streaming speaker (host) only connects to one audio source, disconnect the Bluetooth connection between the streaming speaker (host) and other audio source

Make sure the audio source only connects with one streaming speaker (host), disconnect the Bluetooth connection between the audio source and other speakers

Restart both your speakers and the audio source

Make sure speakers are away from other sources of wireless signal – you could be experiencing interference

Re-pair the audio source with your speaker

If you’re streaming audio content from the internet, the issue could be with the internet connection and not your speaker

• Improved Bluetooth connection between speakers.
• A more powerful Bluetooth transmitter means that the speakers can be farther apart.
• Partyboost can only connect to other Partyboost speakers.

If there are drop out or connection issues when using PartyBoost or Connect+, it could be one of three things.

1.      Units are too far apart (move units closer together) 

2.      Interference from other 2.4gHz wireless units in the area.

3.     Unit is no longer working as designed

Here are some steps to isolate the issue:

 Try taking the units out of the house and test it outside with no interference to see if you still experience connectivity issues. If you still experience connectivity issues, please try steps below:

Whatever unit drops off, remove that from the chain. Test the rest of the speakers and keep doing it until you find the speaker that is causing the drop outs.  If all speakers begin to drop off, please try a different order and repeat. Repeat this process with each unit being the “main speaker”. 

 Make sure to turn off all WiFi/RF devices. (Router, laptop, baby monitor, Nest cams, IP cams, WiFi switches, WiFi outlets, WiFi lights, cordless phones, etc.) 

You should be able to identify the issue/speaker by following these steps. 

How to avoid Bluetooth interference/interruptions:
Always have a clear line of sight between your Bluetooth device (speaker, headphones, etc.) and source device (Smartphone/tablet/PC, etc). Be aware of obstacles in front of your devices.
Try to shutdown products that have Bluetooth, but not are not being used. They are often the reason for interference even though they are not being used.
Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
Bluetooth signals cannot travel through water, which includes the human body. Make sure with Wireless Headphones to keep your Source device and the receiver on the same side of your body.
Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.

Pairing issues with a Smartphone or Tablet:
First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
"Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with our product.
Try to restart the source device(Smartphone/tablet/PC) by powering it off and on again, and after restarting try to establish a Bluetooth connection to your product.
If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with our device, but if you are still experiencing issues then contact us again.

Pairing issues with a Computer or PC:

• Check that the PC/Laptop supports Bluetooth, and that Bluetooth is turned on
• Put the audio device in pairing mode
• Put the PC in Pairing mode
• Select the audio device from the list shown

In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sounds from your Computer/PC/Laptop:
A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, contact their support.

If you come across a prompt with: "Please Enter Pincode", the default pin-codes are often 0000 or 1234 - but if this does not work then the drivers on the PC will need to be updated from the manufacturer's website


What is Bluetooth technology?
Bluetooth technology is a wireless technology that exchanges data (Music etc.) over short distances from a mobile device.
Bluetooth range depends on your surroundings (reflection from objects) and what chipset is being used (some can go 1 meter, 10 meters or 100 meters).
Our Bluetooth devices typically supports up to 10 meter distance from the source device.

Explaining the different Bluetooth profiles used in our devices:
Many of our Bluetooth devices have a specification sheet like Bluetooth Profiles Supported: A2DP v1.5/AVRCP v1.6. These are the protocols that a specific Bluetooth speaker or Headphone device is compatible with. This might look too technical for some customers, but all you need to know is that Bluetooth Speakers and Headphones they are the only ones with these profile that you need to be aware of:

A2DP – A2DP stands for ‘Advanced Audio Distribution Profile’ and is a Bluetooth protocol that allows mobile users to stream high quality (stereo or mono) audio wirelessly. If you want to listen to your music on a pair of Bluetooth headphones or speakers, both devices need to support this.
AVRCP – AVRCP stands for ‘Audio/Video Remote Control Profile' and controls remote functions such as pause/start/skip/forward.
HSP – HSP stands for ‘Headset Profile’ and is a Bluetooth profile to enable a two-way wireless Headphone to be used with a Bluetooth smartphone. In our Headphones this is one of the most common Bluetooth profiles and supports simultaneous two-way (full-duplex) audio, but it does not support stereo audio.
HFP - HFP Stands for 'Hands Free Profile'. This profile provides the same abilities as HSP does, but adds abilities such as redial last number called, voice dialing and call waiting.

Note for HSP and HFP:
You can also use it with devices other than phones, like your Computer/PC with a Bluetooth Headphone that could be used with a Bluetooth-enabled PC and VoIP software to place an Internet phone call (NOTE: some PC software requires different drivers for specific purposes like SKYPE - Always refer to the manufacturer of the PC/Laptop for help with setting this up).

Many Harman Kardon, JBL and AKG products run on rechargeable batteries. In most cases, these batteries will provide years of excellent service and keep the music playing for many hours.

WARNING – the rechargeable batteries inside our products are not user-serviceable. Please do not attempt to open the product or replace the battery. Doing so will void your warranty.

Battery issues fall into three categories:

• Your speaker or headphones run out of power after only a short time.

• The speaker will not play at all because the battery will not hold a charge.

• When you plug in the cable to charge your speaker, sometimes it charges and sometimes it does not- the red charging LED or other indicator might not come on.

  Here are some things to try that often fix these issues.

1. It could be as simple as a bad USB charging cable. If you have other charging cables, give them a try. (Be sure that the cable has the same type of connector as the original one that came with your product.)

2. Same for the charger- if your product charges by USB, try a different USB charger. Be sure that it is rated at least 2.0a (2 amps) output.

3. Try other electrical outlets at your location to be certain it is not a local wiring issue.

4. Charge the product overnight for at least 8 hours.

5. When you plug the charging cable into the speaker or headphones, is the connector stable, or can it be wiggled around? If it can be wiggled, this could indicate that the charging port has been damaged or come loose. Sometimes wiggling the connection restores charging power.

IMPORTANT: Some products such as Xtreme, Xtreme 2, Boombox, Partybox 100 & 300, GO+Play and the Onyx Studio series do not use USB charging. Instead, they have a specialized charger. Do not attempt to charge these products with other cables or chargers.

If none of these fixes the issue, it could be that the battery has died or is losing its capacity, or that the charging connector on your speaker is damaged. Please contact us so we can assist you. Be sure to mention that you have tried the steps in this Battery & Charging FAQ so that our agents do not ask you to repeat these steps.