JBL Tune 115BT
Wireless In-Ear headphones
Sold from 2019 until now
Getting started with your JBL Tune 115BT
Quick Start Guide & Downloads
Product Specifications
- Weight (g)
- 19.02
- Driver size (mm)
- 8.6
- Driver sensitivity at 1kHz/1mW (dB)
- 102
- Dynamic frequency response range (Hz)
- 20Hz-20kHz
- Impedance (ohms)
- 16
- Weight (g)
- 19.02
- Weight (oz)
- .67
- Bluetooth profiles
- HFP V1.6.HSP V1.2.AVRCP V1.5.A2DP V1.2
- Bluetooth frequency
- 2.402GHZ-2.480GHZ
- Bluetooth transmitted modulation
- GFSK/DQPSK/8DPSK
- Bluetooth transmitter power
- < 4dBm
- Bluetooth version
- 4.2
- Charging time (hours from empty)
- <2hrs
- Maximum play time (hours)
- 8
- Bluetooth
- Yes
- Charging cable
- Yes
- Remote control in cable
- Yes
- 3-Button Remote/ Mic
- Yes
- Built-in Microphone
- Yes
- Flat Cable
- Yes
- Hands Free Call
- Yes
- JBL Pure Bass Sound
- Yes
- Multi-Point Connection
- Yes
- Rechargable battery
- Yes
- Wireless
- Yes
Make all of your music easy listening.
Featuring JBL Pure Bass Sound, the JBL TUNE 115BT headphones offer a grab 'n' go, wireless solution for your everyday fun. And there's more than great sound: the JBL TUNE 115BT allow you to make or take hands free calls and feature up to 8 hours of battery life. Featuring multi-point connectivity, you'll never miss a call as the JBL TUNE 115BT seamlessly switch between a video on your tablet to a call on your phone. Imagine headphones that quickly charge in 2 hours, come in various distinctive colors, feature a flat tangle free cable and are lightweight enough to comfortably wear for hours on end. And when you combine magnets that ensure the headphones are not dangling when not in use and the comfort of the ergonomic ear-tips and neckband design, it’s easy to see how the JBL TUNE 115BT headphones can become an essential part of your day-to-day music loving life.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
There are several easy ways to prevent damage to your headphones, and please follow the steps below.
-
If the USB port has a cover, please always have it covered, except when charging.
-
Always be sure the USB port and connector are dry before connecting to charge.
-
Do not allow any oils, stains, sweat, or corrosive materials to contact the charging port. It will eventually damage the port.
-
Do not damage or block the USB port. For example, do not force it in if you have trouble inserting the USB connector into the port. Instead, examine the port and remove foreign substances that might be inside or blocking the port.
Was this helpful? Thank you for your feedback! -
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.
To connect to two devices at the same time:
1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection.
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.
(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)
Was this helpful? Thank you for your feedback! -
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)