Getting started with your JBL Xtreme
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Output power (W)
- 2 x 20
- Signal-to-Noise Ratio
- 80 dB
- Frequency Response
- 70Hz – 20kHz
- Dimensions (cm)
- 12.6 x 28.3 x 12.2
- Dimensions (in)
- 4.96 x 11.14 x 4.8
- Weight (kgs)
- 2.11
- Weight (lbs)
- 4.65
- Bluetooth version
- 4.1
- Battery capacity (mAh)
- 10,000
- Charging time (hrs)
- 3.5
- Maximum music playing time (hrs)
- 15
- 3.5 mm audio cable Input
- Yes
- Auto-power off
- Yes
- Bluetooth
- Yes
- JBL Connect
- Yes
- Powerbank
- Yes
- Speakerphone
- Yes
- Splashproof
- Yes
- Wireless
- Yes
- Transducer
- Woofer 2 x 63 mm
Powerful sound, now transportable
JBL Xtreme is the ultimate portable Bluetooth speaker that effortlessly delivers earth-shaking, powerful stereo sound by incorporating four active transducers and two visible JBL Bass Radiators. Packing a massive rechargeable 10,000mAh Li-ion battery that supports up to 15 hours of playtime and dual USB charge out, this speaker easily keeps your music and your devices going for as long as you need them to. You can trust JBL Xtreme to bring the excitement wherever you need it – whether indoors or outdoors, poolside party or backyard barbeque – with its splashproof fabric design that’s available in black, blue, or red. It also features a noise and echo cancelling speakerphone for clear conference calls, and JBL Connect that can wirelessly link multiple JBL Connect enabled speakers together to amplify the listening experience.
FAQs & How-Tos
-
This is because most Windows do not support A2DP stereo audio streaming via Bluetooth, the standard for music-listening through Bluetooth. The system will support keyboards, mice, printers etc. via Bluetooth, but not audio. It is necessary to download the proper drivers, either from the computer manufacturer, the software manufacturer or the manufacturer of the Bluetooth chip in the computer. Help to do this must be sought with the companies that supply one or more of these computer features.Was this helpful? Thank you for your feedback!
-
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.Was this helpful? Thank you for your feedback!
-
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL ConnectWas this helpful? Thank you for your feedback!
-
Yes, steam and drops of water in a bathroom are fine.Was this helpful? Thank you for your feedback!
-
Yes, this is no problem.Was this helpful? Thank you for your feedback!
-
No, JBL Flip 4 can wirelessly link with JBL Connect+ compatible speakers only. Currently, the Flip 4, Pulse 3 and Charge 3 ( after a firmware upgrade ) have the JBL Connect+ featureWas this helpful? Thank you for your feedback!
-
If you are playing on battery only, you may experience slightly lower bass level and dynamics near maximum volume. If you are AC connected and playing via your Xtreme speaker, you will hear an increase in bass performance. The reason that bass performance is lowered when playing on battery is to reduce power consumption for you to have longer playing time from your Xtreme speaker.Was this helpful? Thank you for your feedback!
-
By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version.Was this helpful? Thank you for your feedback!
-
By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version of your Xtreme. The Xtreme must be ON.
Was this helpful? Thank you for your feedback! -
Please press JBL Connect buttons on both speakers to connect.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)