


JBL Flip 3
JBL Flip 3 is the next generation wireless speaker in the award-winning Flip series.
It is a comprehensive portable Bluetooth speaker that delivers surprisingly powerful, room-filling stereo sound everywhere. This ultra-compact speaker is powered by a 3000mAh rechargeable Li-ion battery that offers up to 10 hours of continuous playtime.
Sporting a durable, splashproof fabric and available in 8 vibrant colors, Flip 3 is the all-purpose, all-weather companion that integrates music into every aspect of your life – from tabletop to poolside, from sunny mornings to rainy nights.
Flip 3 also features a built-in noise and echo cancelling speakerphone for crystal clear conference calls, and JBL Connect technology that can wirelessly link multiple JBL Connect-enabled speakers together to amplify the listening experience.
Product Specifications
General Specifications
Output power (W) | 2 x 8 |
---|
Audio Specifications
Signal-to-Noise Ratio | Less than 80dB |
---|---|
Frequency Response | 85Hz – 20kHz |
Output power | 2 x 8W |
Dimension Specifications
Dimensions (in) | 2.5 x 6.7 x 2.5 |
---|---|
Dimensions (cm) | 6.4 x 16.9 x 6.4 |
Weight (kgs) | 0.45 |
Weight (lbs) | 0.99 |
Speaker Specifications
Transducer | 2 x 40mm |
---|
Control Connect Specifications
Bluetooth version | 4.1 |
---|
Documents & Downloads
Spec Sheets
Quick Start Guide
Software
Gallery





Videos
What’s in the Box
- 1 x JBL Flip 3
- 1 x Micro USB Charging Cable
- 1 x Quick Start Guide
- 1 x Safety Sheet
- Warranty Card included

FAQs & How-Tos
How can I check the software version on my Flip3, Flip4 or Xtreme??
By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version.
Was this helpful?
Thank you for your feedback!
Can i connect 3 or more speakers together with JBL Connect?
No, for now it is only possible to connect two speakers together using the JBL connect feature.
Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL Connect
Was this helpful?
Thank you for your feedback!
How do I use the unit as a microphone/speaker?
Make sure your device is paired with a mobile device. When receiving a call, press the phone button to answer the call. You can now use it as a speakerphone.
Was this helpful?
Thank you for your feedback!
After I updated my computer to Windows 8/10, I am no longer able to establish a Bluetooth connection with my speaker to play music.
How can I correct the problem?
This is because most Windows do not support A2DP stereo audio streaming via Bluetooth, the standard for music-listening through Bluetooth.
The system will support keyboards, mice, printers etc. via Bluetooth, but not audio.
It is necessary to download the proper drivers, either from the computer manufacturer, the software manufacturer or the manufacturer of the Bluetooth chip in the computer.
Help to do this must be sought with the companies that supply one or more of these computer features.
Was this helpful?
Thank you for your feedback!
What is the latest software version available for Flip 3?
Software version v.7.9 is the latest for the Flip 3
Was this helpful?
Thank you for your feedback!
What can I do with the Connect app?
It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode.
Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect App
Was this helpful?
Thank you for your feedback!
My Flip 3 does not respond after update. What can I do?
Try below steps.
Attach the charger so the device is charging.
While charging:
First try to hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds (this resets the Flip 3 to factory settings).
If this does not help, press and hold the "Volume +" and "Link" buttons for more then 10 seconds (this will exit demo mode).
As a last step, short press on the "Volume -" & "Volume +" & "Phone" buttons.
If the device will still not turn on, it has a defect.
Was this helpful?
Thank you for your feedback!
PartyBoost support on the JBL Connect and JBL Connect+
The new PartyBoost does not support the previous Connect and Connect+ features. For example: You will not be able to successfully connect the new PartyBoost enabled Flip 5 with a Connect+ enabled speaker like the Pulse 3 or Flip 4. You will not be able to connect the Boombox 2 to the original Boombox speaker.
Was this helpful?
Thank you for your feedback!
My Flip3 got dirty after a day on the beach. Can I rinse it under the faucet or shower?
Yes, rinse it under a faucet or under the shower, but not under full water pressure.
Was this helpful?
Thank you for your feedback!
Information on different firmware versions on same products and models
There can be differences in the internal hardware that also implies different firmwares. These products feature the same specifications and performance expectations. If the app does not inform you of any new updates, the firmware is current and the product is performing as designed.
Was this helpful?
Thank you for your feedback!
Is the case waterproof?
The case handle light rain and snow, but will not be waterproof if submerged into water.
Was this helpful?
Thank you for your feedback!
Why is there no battery charger in the box?
This is because standard USB charging is possible from so many sources and chargers, and also from computers. There is a charging cable in the box, which permits charging from all USB chargers of at least 1A capacity.
Was this helpful?
Thank you for your feedback!
Can the case be used to carry accessories with the speaker?
No. The case can only be used to carry the speaker.
Was this helpful?
Thank you for your feedback!
Is the device still splash-proof if the flap over the aux input and the charging socket is open?
No, only if the socket is closed.
Was this helpful?
Thank you for your feedback!
Does my speaker have an input selector, or are Bluetooth and AUX signals playing simultaneously?
Bluetooth keeps on playing, even if you connect something and play to the AUX input.
BT keeps on playing, since it has first priority.
If you pause or stop BT play, any source playing to the AUX input will now be heard.
If you resume play on the BT source, it will take over, and the AUX source is no longer heard, but will of course keep on playing, since there is no way to send a pause or stop signal to the AUX source via the line cable.
All of this means that there is an input selector switch built into the device, controlled by the BT play function.
Was this helpful?
Thank you for your feedback!
Only one of the two speaker units is active when used as a telephone speaker. Is this correct?
Yes, this is correct.
In order to minimize interference between speaker and microphone during telephone conversations, one speaker unit is deactivated.
Was this helpful?
Thank you for your feedback!
How to reset: Flip 2, Flip 3, Clip 2
In power ON mode press and hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds -> Unit will power Off by itself.
Now the unit is reset to factory default.
Now the unit is reset to factory default.
Was this helpful?
Thank you for your feedback!
Why do I get an orange charger cable with my blue Flip3
Orange cable is JBL signature color!
Was this helpful?
Thank you for your feedback!
When using JBL Connect, how far can i take the second speaker with me?
JBL Connect feature is using Bluetooth technology, so it is hard to say how far you can walk away. Depending on what other signals you have at your place that could interupt and wall material between speakers.
Was this helpful?
Thank you for your feedback!
How can I connect two JBL Connect compatible speakers together?
Please press JBL Connect buttons on both speakers to connect.
Was this helpful?
Thank you for your feedback!
Does it have automatic standby?
Yes, after approximately 10 minutes of no activity and no audio, the unit goes into sleep mode. It must be awakened with the ON/OFF Button. It is not possible to wake it up with a Bluetooth pairing signal. After 20 minutes of no activity and no audio, the unit will power off.
Was this helpful?
Thank you for your feedback!
If I pair my Bluetooth speaker to my phone, and record a video with the phone, will the speaker's microphone serve as audio source?
No, all recordings made on the telephone will be using the telephone's built-in microphone.
Replay of the recording will be heard over the speaker afterwards, though, as long as it is paired to the telephone.
Was this helpful?
Thank you for your feedback!
Can I use my Flip3 outside in rainy weather?
Yes, this is no problem.
Was this helpful?
Thank you for your feedback!
I want to do a stereo setup. Can I use any Connect-equipped speaker for this?
Only identical Connect-equipped speakers can be used a true stereo pairs. Speakers that are not identical will play double mono.
Was this helpful?
Thank you for your feedback!
Buttons unresponsive when plugged into a power source
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.
Was this helpful?
Thank you for your feedback!
How to reset Bluetooth on Flip3?
With the Flip3 ON, press the Bluetooth briefly to enter pairing mode, while another BT source that is already connected plays on. Now two sources can take turns playing, just by pressing play on one, then the other. The one being overridden will enter pause mode. For complete Bluetooth reset, while the Flip3 is ON and paired, press and hold the Bluetooth button for more than 3 seconds. The Bluetooth button light goes out, and the connection is broken. Press the Bluetooth button again for new pairing.
Was this helpful?
Thank you for your feedback!
Can I place my Flip3 in the bathroom, where it is humid, and it may be splashed with water?
Yes, steam and drops of water in a bathroom are fine.
Was this helpful?
Thank you for your feedback!
What do the LED indicators show?
Power button, no light: Product is OFF.
Power button, constant light: Product is ON.
Power button: constant white, when no Bluetooth device connected.
Power button, flashing blue in Bluetooth pairing mode.
Power button, constant blue light: Bluetooth connected.
Battery indicator LEDs: Five LEDs show battery level.
When charging, the blinking LED shows how far charging has progressed.
When fully charged, the LED lights will turn off.
JBL Connect button flashes white in connection mode.
When connected: constant light.
Was this helpful?
Thank you for your feedback!
Which JBL products have the Connect technology
The first JBL speakers featuring the JBL Connect technology are: JBL Flip 3, JBL Pulse 2, JBL Xtreme, JBL Boost TV and JBL Charge 3, SB 450
A firmware upgrade is available for the JBL Charge 3 ,which will upgrade Connect to JBL Connect+. After this fw upgrade, it is no longer possible to connect the Charge 3 with other products which have JBL Connect ( Flip 3, Boost TV, Pulse 2, Xtreme )
Was this helpful?
Thank you for your feedback!
Which JBL portable Bluetooth speakers have the JBL voice integration with SIRI and Google Now feature?
JBL Xtreme, JBL Pulse 2, JBL Charge3, JBL Flip 3, Pulse 3, and Flip 4
Android, Google Now, Google Play are trademarks of Google Inc. Siri, iTunes, and Apple Music are trademarks of Apple Inc. Spotify is a registered trademark of Spotify AB. IOS is a registered trademark of Cisco in the US and is used by Apple under license.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)