JBL Bar 2.1 Deep Bass
The elegant JBL BAR 2.1 Deep Bass Soundbar features Bluetooth, Optical, HDMI in and ARC connectivity with both Dolby Digital and JBL Surround Sound modes. Its room filling 300 Watts of total system power delivers an immersive experience by way of its four powerful full range drivers, two 1” tweeters, and JBL engineered 6.5” subwoofer. On-board Bluetooth allows you to use the Bar 2.1 for streaming music from your favorite device in addition to its ability to deliver a real JBL theater experience when coupled with your flat panel TV. Its elegant and low profile design will look amazing below your TV.
|Model||Bar 2.1 Deep Bass CNTR (Soundbar Unit), Bar 2.1 Deep Bass SUB (Subwoofer Unit)|
|Power supply||100 - 240V AC, ~ 50/60Hz|
|Total speaker power output (Max. @THD 1%)||300W|
|Output power (Max. @THD 1%):|
|2 x 50W (Soundbar); 200W (Subwoofer)|
|Transducer||4 x race track drivers + 2 x 1” tweeter (Soundbar); 6.5” (Subwoofer)|
|Soundbar and Subwoofer standby power||<0.5W|
|Operating temperature||0°C - 45°C|
|HDMI Video output (With Audio return channel)||1|
|HDMI Video input||1|
|Frequency response||40Hz - 20KHz|
|Audio inputs||1 Optical, Bluetooth, USB (USB playback is available in US version. For other versions, USB is for Service only.)|
|Dimensions (W x H x D):|
|965 x 58 x 85 (mm) / 38” x 2.28” x 3.35” (Soundbar);|
|240 x 240 x 379 (mm) / 8.9” x 8.9” x 14.6” (Subwoofer)|
|Weight||2.16 kg (Soundbar);|
|5.67 kg (Subwoofer)|
|Packaging dimensions (W x H x D)||1045 x 310 x 405mm|
|Packaging weight (Gross weight)||10.4kg|
Control Connect Specifications
|USB port||Type A|
|USB rating||5V DC/ 0.5A|
|Supporting file format||mp3, wav|
|MP3 Codec||MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3|
|MP3 sampling rate||16KHz - 48 KHz|
|MP3 bitrate||80kbps - 320kbps|
|WAV sample rate||16KHz - 48 KHz|
|WAV bitrate||Up to 3000kbps|
|Bluetooth profile||A2DP V1.3, AVRCP V1.5|
|Bluetooth frequency range||2402MHz-2480MHz|
|Bluetooth Max. transmitting power||<10dBm (EIRP)|
|Modulation Type||GFSK, π/4 DQPSK, 8DPSK|
|5G Wireless frequency range||5736.35 - 5820.35MHz|
|5G Max. transmitting power||<9dBm (EIRP)|
|Modulation Type||π/4 DQPSK|
Documents & Downloads
Quick Start Guide
What’s in the Box
- Wireless subwoofer
- Remote control with batteries
- Power cords (up to 8pcs depending on region SKUs)
- HDMI cable
- Wall-mount bracket kit with screws
- Quick start guide
- Warranty card
- Safety sheet
FAQs & How-Tos
How to restore factory default settingsTo reset your JBL Bar 2.0 or 2.1 back to factory default settings, follow the steps below.
- Turn on your JBL Bar 2.0 or 2.1
- Press SOURCE and POWER buttons on top of the bar at the same time for more than 3 seconds.
- Your soundbar will now power off and on again.
What are the differences between BAR 2.1 and BAR 2.1 Deep-BassIn case you wonder what the differences are between JBL BAR 2.1 and JBL BAR 2.1 Deep Bass, the newest model, then keep reading to find out more!
Our JBL BAR 2.1 Deep Bass is an improvement to the BAR 2.1.
Here is what you will get extra:
- Improved sound quality.
- Deeper and richer bass.
- A new modern design change.
Can’t find what you’re looking for?
Due to the worldwide COVID-19 pandemic, you may experience delays in responses from our Customer Support team.
We appreciate your patience.