JBL Live Pro+ TWS - Rose Gold - True wireless Noise Cancelling earbuds - Hero JBL Live Pro+ TWS - Rose Gold - True wireless Noise Cancelling earbuds - Front JBL Live Pro+ TWS - Rose Gold - True wireless Noise Cancelling earbuds - Back
JBL Live Pro+ TWS - Rose Gold - True wireless Noise Cancelling earbuds - Hero
  • JBL Live Pro+ TWS - Black - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Pro+ TWS - White - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Pro+ TWS - Blue - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Pro+ TWS - Chrome - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Pro+ TWS - Pink - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Pro+ TWS - Beige - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Pro+ TWS - Rose Gold - True wireless Noise Cancelling earbuds - Swatch Image

JBL Live Pro+ TWS

The best audio solution not matter the device, JBL Live Pro+ TWS delivers an immersive True Wireless experience with incredible JBL Signature Sound. Let Smart Ambient connect you to your environment, or focus on the music with Adaptive Noise Cancelling. Then switch easily from tunes to group calls with 4 mics (2 beamforming mics per side) to capture your voice with the feeling of face-to-face conversation and a third mic for environmental noise reduction. All commands are on the earbuds, so you can manage music and calls with your finger only. Get help from your Hey Google (*) or Alexa (**) through your voice or with a tap on the earbud. Activate ANC or Ambient Aware, check the battery life or power off your JBL Live Pro+ TWS simply with your voice with Hey Google (*). With up to 28 hours of playtime from Qi-compatible wireless charging and super-fast wireless recharging, they’re always ready to power your day (*) Only supported on Android (**) Android 6.0 or higher is required for full access to Alexa features when using this device.

Product Specifications

General Specifications

Driver size (mm) 11
IP Code IPX4

Audio Specifications

Driver sensitivity at 1kHz/1mW (dB) 102
Dynamic frequency response range (Hz) 20 Hz – 20 kHz
Impedance (ohms) 16
Number of drivers per ear 1

Dimension Specifications

Charging Case Weight (oz) 1.7
Earpiece Weight (oz) 0.4
Charging Case Weight (g) 49.5
Earpiece Weight (g) 10

Control Connect Specifications

Bluetooth profiles A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency 2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation GFSK, π/4DQPSK, 8DPSK
Bluetooth transmitter power 0 - 13dbm
Bluetooth version 5.0
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • 1 x JBL Live Pro+ TWS
  • 1 x Type-C USB charging cable
  • 1 x 5 Sizes of ear tips
  • 1 x Charging case
  • 1 x Quick Start Guide / Safety Sheet (S / i)
  • 1 x Warranty / Warning (W / !)
JBL Live Pro+ TWS - What's in the Box

FAQs & How-Tos

How to connect your headphones to the Google Assistant for Android devices
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App. Step 1   Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.Once set up is complete, you will see the below screen: Step 2 PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Cleaning Instructions for Re-establishing Charging
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.Repeat until the contact points are visibly clean, and charging should work as designed.Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.This procedure can be performed on all TWS earphones and cases.
How to connect your headphones to the Amazon Alexa for Android and iOS devices
Visit the App Store and download the ‘Amazon Alexa’ App.  Click the Plus(+) button on the top right of the screen.Then select ‘Add Device‘.Select headphones from the list and then choose your Headphones from the list of available devices.Follow the rest of the instructions in the Alexa App to complete the setup.
Sweatproof Information (IPX4)
This unit is IPX4 rated, which means that it is sweatproof (suitable for working out) and can withstand water splashes from any direction. However, the unit is not waterproof and should never be submerged in water.
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your deviceAlways get the latest driver version available for your Computer/PC/Laptop.To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Voice Assistant Headphone Connection
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 
How to use Amazon Alexa with your headphones
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.  Things to try “What’s the weather?”Play Niall HoranPlay NPR on iHeartRadioSet a timer for 5 minutesWhat new skills do you have? Stop Alexa when she talksWhile Alexa is talking, press and release the Action button then say “Stop”.For more information and things to try with Alexa, visit: www.amazon.com/alexadevices
How to connect your headphones to the Google Assistant for iOS devices
Visit your App store to download the ‘Google Assistant’ App.After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App. Step 1   Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.Once set up is complete, you will see the below screen: Step 2 PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also. 
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 
How to Factory Reset True Wireless Stereo Earbuds
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). This restores the earbuds to the factory defaults.TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
My JBL Headphones App Support
This headphone is supported by the My JBL Headphones App.
Microphone Placement
Below you can see the placements of the microphones on some of our headphone models:Live Pro+ TWSTour Pro+ TWS Tour One
How to Perform a Hardware Reset
To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.* LocationLive 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
How to use Google Assistant with your headphones
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphonesGet your notificationsDouble-tap the Action button.Stop your Google AssistantTouch the Action button.Reply to the message (where available)After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones 
TWS Left & Right Not Pairing Together
The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order. Forget/unpair the headphones on your device.Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.Pair the headphones to your device and see if this resolves the problem.If manual pairing does not fix the problem, forget/unpair the headphones on your device again.Initiate a Product Reset to reset the earbud’s Bluetooth connection. Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices againFollow the Product Reset instructions in your Owner's Manual/Quick Start Guide.Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.Pair the buds to your Source Device.
Trouble accessing the Google Assistant or Amazon Alexa on your Headphone
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.
How to switch between voice assistants using the My JBL Headphone app
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.You can change the default assistant in the ‘My JBL Headphones’ app: Open the My JBL Headphones app on your device.Select the headphones you are connected too.Go to Settings by clicking the symbol in the top right corner.Select Voice Assistant.Now you can select your preferred voice assistant. Your headphones may restart after switching Voice Assistant.
How to Turn off your TWS Headphones
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
My JBL Headphones App Support
This headphone is supported by the My JBL Headphones App.

Headphone Support Guide

Need help to resolve some the most common headphone challenges?

Learn more

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)

Chat With Us

Chat With Us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

message

Text Us

Chat with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 8:00 pm (EST)