JBL JR 460NC
Wireless over-ear Noise Cancelling kids headphones
Getting started with your JBL JR 460NC
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 32
- Number of Microphones
- 3
- Driver sensitivity at 1kHz/1mW (dB)
- 92 dB SPL@1 kHz / 1 mW
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- 32
- Charging Cable Length (m)
- 0.2
- Charging Cable Length (ft)
- 0.7
- Ear Cup External Height (in)
- 3.6
- Ear Cup External Width (in)
- 3
- Ear Cup Internal Height (in)
- 2.1
- Ear Cup Internal Width (in)
- 1.5
- Ear Cup Depth (in)
- 0.9
- Ear Cup External Height (cm)
- 9.1
- Ear Cup External Width (cm)
- 7.7
- Ear Cup Internal Height (cm)
- 5.4
- Ear Cup Internal Width (cm)
- 3.8
- Ear Cup Depth (cm)
- 2.3
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Bluetooth version
- 5.0
- Bluetooth profiles
- HFP 1.6 AVRCP 1.5 A2DP 1.3
- Bluetooth frequency
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth transmitter power
- <10 dBm
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 30
- Maximum music play time with ANC on (hours)
- 20
- Maximum play time (hours)
- 30
- Active Noise Cancelling
- Yes
- Charging cable
- Yes
- Audio cable
- Yes
- Built-in Microphone
- Yes
- Multi-Point Connection
- Yes
- Wireless
- Yes
- Over-ear
- Yes
- Rechargable battery
- Yes
JBL Safe Sound, noise free.
Whether on-the-go or learning at home, give your child great JBL Safe Sound. Fine-tuned for kids’ ears and heads, they're comfortable and easy for even the littlest kids to use. Learn, play and explore safely, with under 85dB volume and child-friendly, safe materials that won't damage or break. Up to 20 hours of battery life means long-lasting fun for the whole week, and you can recharge in just two hours. Active Noise Cancelling keeps kids focused, and a built-in mic lets them chat to friends and teachers easily. It’s never too early to appreciate JBL Safe Sound: quality sound has no age.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.
3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.
4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)