EVEREST 110GA - Silver - Wireless in-ear headphones - Hero EVEREST 110GA - Silver - Wireless in-ear headphones - Front EVEREST 110GA - Silver - Wireless in-ear headphones - Back
EVEREST 110GA - Silver - Wireless in-ear headphones - Hero
  • EVEREST 110GA - Silver - Wireless in-ear headphones - Swatch Image
  • EVEREST 110GA - Blue - Wireless in-ear headphones - Swatch Image
  • EVEREST 110GA - Gun Metal - Wireless in-ear headphones - Swatch Image

EVEREST 110GA

JBL Everest™ 110GA in-ear wireless headphone comes with Legendary JBL Pro Audio sound that delivers a dynamic acoustic performance, for up to 8 hours on a single charge, with a 2-hour quick recharge. Now optimized for the Google Assistant, you can take full control of your music experience using your voice and receive notifications without glancing at your phone. Simply get help from your Google Assistant with the press of a button on the inline remote control. The ergonomic design understands every contour of your ear, and fits in snugly for unmatched comfort and hours of listening pleasure. Enjoy crystal clear, hands-free calls using the built-in microphone with echo cancellation. Dare to listen.

Product Specifications

General Specifications

Bluetooth version 4.1
Ear tip material Silicon
Driver size (mm) 5.8

Audio Specifications

Driver sensitivity at 1kHz/1mW (dB) 96dB / 1kHz, 1mW
Dynamic frequency response range (Hz) 10Hz – 22kHz
Impedance (ohms) 32.0
Number of drivers per ear 1.0

Dimension Specifications

Weight (g) 15.3
Weight (oz) 0.56

Control Connect Specifications

Bluetooth profiles HFP v1.7, HSP v1.2, A2DP v1.3, AVRCP v1.6
Bluetooth frequency 2.402GHz – 2.48GHz
Bluetooth transmitted modulation GFSK, π/4DQPSK, 8-DPSK
Bluetooth transmitter power ≤4 dbm(EIRP)
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • EVEREST 110 GA
  • 3 x Sizes of ear tips
  • Charging Cable
  • Carrying Pouch
  • 1 x Warranty / Warning (W / !)
  • 1 x QSG / Safety Sheet (S / Q)
EVEREST 110GA - What's in the Box

FAQs & How-Tos

  • What is the Google Assistant?

    This video explains what the Google Assistant is and how you can use it in your daily life together with Harman / Kardon Citation or JBL LINK products.

  • Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    Category:

    Product information
  • Learn how to troubleshoot your Google Assistant device when it won’t play the song, playlist or artist you’re asking for.

  • How to play music and more with your Google Assistant enabled smart speaker

    This video shows how to play music and much more with your Google Assistant. You can practice all of your voice commands on your Harman/Kardon Citation or JBL LINK products.


  • I cannot activate Google Assistant when touching the dedicated button, why?

    It sounds like you are living in a country where Google Assistant has not yet been officially released. When Google releases the Google Assistant to more countries, the Everest GA headphones will open up for this feature. It may require a software update for this to happen. For now, you can use them as normal Bluetooth headphones and wait for the release to use the Google Assistant feature.

  • Waterproof Information

    This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.

    Category:

    Product information
  • My JBL Headphone App Support

    This headphone is not supported by the My JBL Headphone app.

    Category:

    Product information
  • Discover how to troubleshoot when your Google Assistant device isn’t responding to “Hey Google” or “Ok Google”.

  • Bluetooth Troubleshooting

    How to avoid Bluetooth interference/interruptions:
    Always have a clear line of sight between your Bluetooth device (speaker, headphones, etc.) and source device (Smartphone/tablet/PC, etc). Be aware of obstacles in front of your devices.
    Try to shutdown products that have Bluetooth, but not are not being used. They are often the reason for interference even though they are not being used.
    Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
    Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
    Bluetooth signals cannot travel through water, which includes the human body. Make sure with Wireless Headphones to keep your Source device and the receiver on the same side of your body.
    Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.

    Pairing issues with a Smartphone or Tablet:
    First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
    "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with our product.
    Try to restart the source device(Smartphone/tablet/PC) by powering it off and on again, and after restarting try to establish a Bluetooth connection to your product.
    If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
    Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
    Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
    You should now have a successful pairing with our device, but if you are still experiencing issues then contact us again.

    Pairing issues with a Computer or PC:
    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
    The driver (software) should support the following Bluetooth protocols, to be able to play music/sounds from your Computer/PC/Laptop:
    A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
    AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
    Always get the latest driver version available for your Computer/PC/Laptop.
    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, contact their support.
    The standard drivers provided by Microsoft/Windows systems are often not correct, and will result in error messages (such as having to enter a PIN code), or pairing not working.

    What is Bluetooth technology?
    Bluetooth technology is a wireless technology that exchanges data (Music etc.) over short distances from a mobile device.
    Bluetooth range depends on your surroundings (reflection from objects) and what chipset is being used (some can go 1 meter, 10 meters or 100 meters).
    Our Bluetooth devices typically supports up to 10 meter distance from the source device.

    Explaining the different Bluetooth profiles used in our devices:
    Many of our Bluetooth devices have a specification sheet like Bluetooth Profiles Supported: A2DP v1.5/AVRCP v1.6. These are the protocols that a specific Bluetooth speaker or Headphone device is compatible with. This might look too technical for some customers, but all you need to know is that Bluetooth Speakers and Headphones they are the only ones with these profile that you need to be aware of:

    A2DP – A2DP stands for ‘Advanced Audio Distribution Profile’ and is a Bluetooth protocol that allows mobile users to stream high quality (stereo or mono) audio wirelessly. If you want to listen to your music on a pair of Bluetooth headphones or speakers, both devices need to support this.
    AVRCP – AVRCP stands for ‘Audio/Video Remote Control Profile' and controls remote functions such as pause/start/skip/forward.
    HSP – HSP stands for ‘Headset Profile’ and is a Bluetooth profile to enable a two-way wireless Headphone to be used with a Bluetooth smartphone. In our Headphones this is one of the most common Bluetooth profiles and supports simultaneous two-way (full-duplex) audio, but it does not support stereo audio.
    HFP - HFP Stands for 'Hands Free Profile'. This profile provides the same abilities as HSP does, but adds abilities such as redial last number called, voice dialing and call waiting.

    Note for HSP and HFP:
    You can also use it with devices other than phones, like your Computer/PC with a Bluetooth Headphone that could be used with a Bluetooth-enabled PC and VoIP software to place an Internet phone call (NOTE: some PC software requires different drivers for specific purposes like SKYPE - Always refer to the manufacturer of the PC/Laptop for help with setting this up).

  • What is the requirement for the JBL Everest GA series?

    These are the supported languages for the Everest GA series.

    • English (US, UK, CA, IN, AU)
    • German
    • French (CA, FR)
    • Japanese
    • Portuguese (BR)
    More will be added in future Google releases.

Register your product

Do you own this product?
Register it here!

Register now

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)

Chat With Us

Chat With Us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)