Support Overview / Speakers / Portables / JBL PartyBox 200
JBL PartyBox 200

JBL PartyBox 200

Portable Bluetooth party speaker with light effects

Sold from 2019 until now

Getting started with your JBL PartyBox 200

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Output power (W)
240
Dynamic frequency response range (Hz)
45Hz-20kHz
Dimensions (cm)
31.0 x 32.0 x 69.0
Dimensions (in)
12.2 x 12.6 x 27.1
Weight (kgs)
15.32
Weight (lbs)
33.8
Wireless Connectivity
Bluetooth Technology
TWS (True Wireless Stereo) connecting up to 2 party speakers using Bluetooth technology
100-240V AC and 12V DC
3.5 mm audio cable Input
Yes
Auto-power off
Yes
Bluetooth
Yes
Charging cable
Yes
Lightshow
Yes
Wireless
Yes
JBL Signature Sound
Yes
Rechargable battery
Yes
Note
The product is in compliance with the European Union energy legislation. 1) Bluetooth connection mode - The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation. The product will enter into sleep mode (networked standby), after 20 minutes without operation, the power consumption @ sleep is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection. 2) Bluetooth disconnection mode - The product will enter into standby mode, after 20 minutes without operation, the power consumption @ standby is less than 0.5 Watts.

Be Loud, Be Proud, Be Ready To Party!

The JBL PartyBox 200 is a powerful party speaker with JBL sound quality and vivid light effects. Thanks to its 12V DC input you can bring the party everywhere. Just plug in your Mic or Guitar and take the stage or stream your playlist via Bluetooth or from a USB stick. Connect two PartyBox speakers wirelessly with the TWS feature or wired from one RCA output to another RCA input. Let's get the party started!

Enjoy an immersive audio experience at home or at a party that only JBL sound can provide
There's a light mode for every mood: Meter, Pulse and Party mode.
Plug in your mic or guitar and take the stage.
Wirelessly stream high-quality sound from your smartphone or tablet.
Pre-program your party or event with your favorite playlist from a USB thumb drive!
Connect compatible speakers wirelelessly via TWS (True Wireless Stereo using Bluetooth connection up to 2 party speakers) or wired via one RCA outpur to another.
A USB port on the JBL PartyBox lets you charge other USB devices right from the speaker. So you don’t need an extra charger to keep your devices powered up.

FAQs & How-Tos

15 results
  • Connecting to your Car
    It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )
  • Does my Speaker have Speakerphone/Voice Assistant Functionality?
    This product does not feature speakerphone or voice assistant functionality as it does not have a microphone.
  • Enabling or disabling Demo mode.

    Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
  • How to control the Light shows
    To control the Light show on your JBL Partybox device, simply press the dedicated "Light show" button located under the Bluetooth icon. There are 3 different light shows available when toggling through them, select your favorite one and have a blast. There is no app developed to control or modify these settings, all settings have to be done on the Partybox device.
  • How to create a Bluetooth connection with your mobile device

    Bluetooth Pairing

    1. Press the BT button button on the Partybox to start the pairing process.
    2. Grab your mobile device.
    3. Go to settings --> Bluetooth --> Enable Bluetooth --> BT ON
    4. Find the Partybox speaker you want to establish a Bluetooth connection to.
             BT settings
    1. You now have a successful connection and can stream your favorite music.
      1. NOTE: It is only possible to have two devices connected at the same time and if you want to listen through the second Bluetooth device then stop the current one from playing and use the second device.
      2. To stop Bluetooth broadcasting then insert a USB device.
    BT con
    1. How to find the software version

      Finding the software version

      1. Press and hold the 'Volume-' and 'Bass Boost' buttons for 5 seconds.
      2. A voice will start prompting numbers which indicates the current software version.
      PBFW_Announce.png
    2. How to play music through using a USB stick

      USB Stick

      1. Get an empty USB str stick with speed of 2.0.
      2. Make sure it is formatted with FAT16 or FAT32.
      3. Your Music files can only be: MP3 (32-320kbit/s), WMA(32-320kbit/s) and wAV(44.1K/48K/192K).
      4. The Partybox supports up to 8 subfolders.
      5. It will be played in alphabetic sequence with main folders first then subfolders.
      6. To skip songs forward, double press the Play/Pause button. To skip back, triple press the Play/Pause button.
    3. How to Reset to Factory Settings

      Resetting the Partybox to Factory Settings

      1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
      2. The JBL Partybox will power off and back on and is now reset.
    4. Is my Partybox Supported by the JBL Partybox App?
      This model is not supported by the JBL Partybox App.
    5. JBL Partybox: Rated Power Output and 12V DC Car Charger Functionality

      Rated Power Output

      Partybox 200:
      AC Power 120W
      12V (car) 90W (PLEASE NOTE: NO BATTERY)

      Partybox 300:
      AC Power 120W
      DC Power (battery) 90W
      12V Power (car) 90W       (PLEASE NOTE: DOES NOT CHARGE THE PARTYBOX, ONLY POWERS)

      Partybox 310:
      AC Power - 240W
      DC Power (battery) - 140W
      12V Power (car) - 140W (PLEASE NOTE: DOES CHARGE THE PARTYBOX)
    < 1 2 >

    Images & Videos

    • JBL PartyBox 200 - Black - Portable Bluetooth party speaker with light effects - Hero
    • JBL PartyBox 200 - Black - Portable Bluetooth party speaker with light effects - Front
    • JBL PartyBox 200 - Black - Portable Bluetooth party speaker with light effects - Back
    • JBL PartyBox 200 - Black - Portable Bluetooth party speaker with light effects - Left
    • JBL PartyBox 200 - Black - Portable Bluetooth party speaker with light effects - Detailshot 1
    • JBL PartyBox 200 - Black - Portable Bluetooth party speaker with light effects - Detailshot 2
    • JBL PartyBox 200 - Black - Portable Bluetooth party speaker with light effects - Detailshot 4

    Can’t find what you’re looking for?

    Call Us

    Call Us

    Talk to a product expert
    Call Us now at: (800) 336-4525

    Mon - Fri: 9:00 am - 11:00 pm (ET)
    Sat - Sun: 9:00 am - 5:00 pm (ET)

    Chat with Us

    Chat with Us

    Mon - Fri: 9:00 am - 11:00 pm (ET)
    Sat - Sun: 9:00 am - 5:00 pm (ET)

    message

    Text Us

    Text with a support agent via SMS at:
    628-333-7807

    Mon - Fri: 9:00 am - 11:00 pm (ET)
    Sat - Sun: 9:00 am - 5:00 pm (ET)