JBL Wave Beam
Totalt trådløse øretelefoner
Getting started with your JBL Wave Beam
Documents & Downloads
Product Specifications
- Opladningsetui IP Code
- IPX2
- Enheds-størrelser (mm)
- 8
- Number of Microphones
- 1
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 100
- Dynamisk frekvensområde (Hz)
- 20 Hz – 20 kHz
- Impedans (ohm)
- 16
- Vægt (g)
- 39.5
- Charging Case Weight (oz)
- 1.4
- Vægt (g)
- 8.8
- Earpiece Weight (oz)
- 0.3
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth-frekvens
- 2.4 GHz - 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth sender-effekt
- <15 dBm
- Bluetooth-version
- 5.2
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 32
- Bluetooth
- Ja
- Charging cable
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- Genopladeligt batteri
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Multifunktionel TalkThru-knap
- Ja
- Touch-knapper
- Ja
- Ægte trådløse
- Ja
- Vand resistent
- Ja
- IPX-rating
- IP54
Dyb bas, højt humør
Tag din lyd med overalt. Med en bas, du kan mærke, op til 32 timers samlet batterilevetid og et sikkert, komfortabelt lukket design, er den stænk- og støvafvisende JBL Wave Beam designet til din daglige underholdning. Uanset om du udforsker byens gader eller slapper af på stranden, vil dine håndfri stereoopkald altid være krystalklare, mens Smart Ambient-teknologien holder dig opmærksom på dine omgivelser. Og når du har brug for et ekstra boost, kan du oplade to ekstra timers strøm på bare 10 minutter.
Få mest muligt ud af dine mix med lyd i høj kvalitet fra sikre, pålidelige øretelefoner med 8 mm enheder med JBL Deep Bass-lyd.
JBL Wave Beam har et ergonomisk åbent design, så du let glemmer, du har dem på. Det lukkede design udelukker eksterne lyde og forbedrer basydelsen.
Med 8 timers batteri i øretelefonerne og 24 i etuiet leverer JBL Wave Beam lyd hele dagen. Og når du har brug for mere strøm, kan du hurtigoplade til to ekstra timer på kun 10 minutter.
Tag rundt overalt, og hør det hele med Smart Ambient-teknologi. Når du har brug for en hurtig snak, kan du med TalkThru straks høre dig selv og dem omkring dig uden at tage dine øretelefoner ud. Eller brug Ambient Aware til at holde musikken kørende, mens du forbliver opmærksom på dine omgivelser.
Når du foretager håndfri stereoopkald på farten, kan du med VoiceAware afbalancere, hvor meget af din egen stemme du hører, mens du taler med andre.
Fra stranden til cykelstien - de IP54-certificerede øretelefoner og det IPX2-certificerede opladningsetui er vand- og støvafvisende - og klar til alle dagens oplevelser.
Lyt hele dagen — på din måde. Tilpas din foretrukne lyd med den dedikerede app, og gør JBL Wave Beam til din perfekte lydledsager.
FAQs & How-Tos
3 results
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00