JBL JR 460NC
Trådløse, omsluttende hovedtelefoner med støjreduktion til børn
Getting started with your JBL JR 460NC
Documents & Downloads
Product Specifications
- Weight (g)
- 200
- Enheds-størrelser (mm)
- 32
- Number of Microphones
- 3
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 92 dB SPL@1 kHz / 1 mW
- Dynamisk frekvensområde (Hz)
- 20 Hz – 20 kHz
- Impedans (ohm)
- 32
- Dybde (cm)
- 2.3
- Ear Cup Depth (in)
- 0.9
- Højde (cm)
- 9.1
- Ear Cup External Height (in)
- 3.6
- Bredde (cm)
- 7.7
- Ear Cup External Width (in)
- 3
- Indre bredde (cm)
- 5.4
- Ear Cup Internal Height (in)
- 2.1
- Indre højde (cm)
- 3.8
- Ear Cup Internal Width (in)
- 1.5
- Hovedtelefonernes kabel-længde (m)
- 0.2
- Headphone Cable Length (ft)
- 0.7
- Bluetooth-profiler
- HFP 1.6 AVRCP 1.5 A2DP 1.3
- Bluetooth-frekvens
- 2.4 GHz - 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth sender-effekt
- <10 dBm
- Bluetooth-version
- 5.0
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 30
- Maksimal spilletid med aktiv støjreduktion (timer)
- 20
- Maksimal spilletid (timer)
- 30
- Audio cable
- Ja
- Charging cable
- Ja
- Aktiv støjreduktion
- Ja
- Indbygget mikrofon
- Ja
- Flerpunktsforbindelse
- Ja
- Over-ear
- Ja
- Genopladeligt batteri
- Ja
- Trådløse
- Ja
JBL Safe Sound, uden støj.
Uanset om I er på farten eller lærer derhjemme, så giv dit barn den fantastiske JBL Safe Sound. De er finjusteret til børns ører og hoveder og er komfortable og nemme at bruge for selv de mindste børn. Lær, spil og udforsk på en sikker måde med en lydstyrke under 85 dB og børnevenlige, sikre materialer, der ikke går i stykker. Op til 20 timers batterilevetid betyder langvarig sjov hele ugen, og du kan genoplade på blot to timer. Aktiv støjreduktion fastholder barnets fokus, og den indbyggede mikrofon gør det let at chatte med venner og lærere. Det er aldrig for tidligt at sætte pris på JBL Safe Sound: Kvalitetslyd har ingen aldersgrænse.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.
3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.
4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00