JBL Reflect Mini NC - Blue - Waterproof true wireless Noise Cancelling sport earbuds - Hero JBL Reflect Mini NC - Blue - Waterproof true wireless Noise Cancelling sport earbuds - Front JBL Reflect Mini NC - Blue - Waterproof true wireless Noise Cancelling sport earbuds - Detailshot 1
JBL Reflect Mini NC - Blue - Waterproof true wireless Noise Cancelling sport earbuds - Hero
  • JBL Reflect Mini NC - White - Waterproof true wireless Noise Cancelling sport earbuds - Swatch Image
  • JBL Reflect Mini NC - Black - Waterproof true wireless Noise Cancelling sport earbuds - Swatch Image
  • JBL Reflect Mini NC - Blue - Waterproof true wireless Noise Cancelling sport earbuds - Swatch Image
  • JBL Reflect Mini NC - Green - Waterproof true wireless Noise Cancelling sport earbuds - Swatch Image

JBL Reflect Mini NC

Uanset om du dyrker yoga, gymnastik eller løber, er JBL Reflect Mini NC sports-øretelefonerne det perfekte match til din aktive livsstil. Med aktiv støjreduktion kan du fokusere på dit træningsmål uden forstyrrelser. Takket være Smart Ambient-teknologien er du stadig opmærksom på omgivelserne, og du kan snakke med vennerne. Hvert ørestykke forbindes øjeblikkeligt og uafhængigt, så du kan foretage opkald med den enhed, du foretrækker, og tildele unikke funktioner til venstre og højre. Med 21 timers spilletid, et udvalg af reflekterende farver og IPX7-vandtæthed er dette de ultimative trådløse sports-øretelefoner

Product Specifications

General Specifications

Enheds-størrelser (mm) 6

Audio Specifications

Enheds-følsomhed ved 1kHz/1mW (dB) 97
Dynamisk frekvensområde (Hz) 20 Hz – 20 kHz
Impedans (ohm) 16
Antal dynamiske enheder pr. øre 1

Dimension Specifications

Charging Case Weight (oz) 1.6
Earpiece Weight (oz) 0.5
Vægt (g) 46
Vægt (g) 13.5

Control Connect Specifications

Bluetooth-profiler A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth-frekvens 2.4 GHz – 2.4835 GHz
Bluetooth sender-modulation GFSK, π/4DQPSK, 8DPSK
Bluetooth sender-effekt 0 - 10dbm
Bluetooth-version 5.1
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • 1 x REFLECT Mini NC
  • 3 x størrelser ørepropper
  • 3 x størrelser ørespids-stabilisatorer
  • 1 x opladningsetui
  • 1 x opladningskabel type-C
  • 1 x garanti/advarselsark
  • 1 x lynguide/sikkerhedsark
JBL Reflect Mini NC - What's in the Box

FAQs & How-Tos

  • Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png

    Category:

    Product information
  • Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    Category:

    Product information
  • Multipoint Connectivity Information

    These headphones do not support Multipoint Connectivity, which means that they can only be connected to one Bluetooth device at a time. 

    Category:

    Product information
  • How to connect your headphones to the Google Assistant for iOS devices

    Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png

    Category:

    Product information
  • How to connect your headphones to the Amazon Alexa for Android and iOS devices

    Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.

    Category:

    Product information
  • How to connect your headphones to the Google Assistant for Android devices

    If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png

    Category:

    Product information
  • Standby Mode Information

    If the earbuds go into standby mode and turn off, you can still use them without putting them back into the charging case. 
    You can reactivate the headphones by pressing or touching the outside earbud itself.
    Please note: They will be automatically powered off after 30 minutes of being in standby mode if they disconnect from Bluetooth. To reconnect, you will need to put the earbuds back in the charging case and take them off again. 

    It is possible to change the standby mode time with your headphones. To do this, go into the My JBL Headphones app and choose the S
    tandby Time via Auto-off function. You can adjust the time to 15min, 1hr, etc., or you can choose “Never” if you want to keep the earbuds turn on at all times. Once you set the Auto-off, the earbuds will work according to the setting whether they connect to Bluetooth or disconnect.
     

    Category:

    Product information
  • Cleaning Instructions for Re-establishing Charging

    It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.

    Category:

    Troubleshooting
  • How to use Google Assistant with your headphones

    After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
    Trigger Google - #1 FAQ.png
    Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones

    Get your notifications
    Double-tap the Action button.

    Stop your Google Assistant
    Touch the Action button.

    Reply to the message (where available)
    After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

    For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

     

    Category:

    Getting started
  • How to avoid Bluetooth Interference or Interruptions

    • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.

    Category:

    Connectivity
  • My JBL Headphones App Support

    This headphone is supported by the My JBL Headphones App.
  • Pairing issues with a Smartphone or Tablet

    1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

    2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

    3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

    4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

    5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

    6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

    You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.

    Category:

    Connectivity
  • How to Perform a Hardware Reset

    To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
    * Location
    Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
    Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
    Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
  • How to use Amazon Alexa with your headphones

    After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
      Trigger Alexa #2 FAQ.png

    Things to try
    • “What’s the weather?”
    • Play Niall Horan
    • Play NPR on iHeartRadio
    • Set a timer for 5 minutes
    • What new skills do you have?
    Stop Alexa when she talks
    While Alexa is talking, press and release the Action button then say “Stop”.

    For more information and things to try with Alexa, visit: www.amazon.com/alexadevices

    Category:

    Getting started
  • How to Factory Reset True Wireless Stereo Earbuds

    Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • Pairing issues with a Computer or PC

    In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

    The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

    • A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

    • AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

    Always get the latest driver version available for your Computer/PC/Laptop.

    To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

    The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.

    Category:

    Connectivity
  • Trouble accessing the Google Assistant or Amazon Alexa on your Headphone

    First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.

    Category:

    Getting started
  • How to Turn off your TWS Headphones

    1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).

    Category:

    Troubleshooting
  • How to switch between voice assistants using the My JBL Headphone app

    The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

    Switching between voice assistant #1.png

    You can change the default assistant in the ‘My JBL Headphones’ app:
    1. Open the My JBL Headphones app on your device.
    2. Select the headphones you are connected too.
    3. Go to Settings by clicking the symbol in the top right corner.
    4. Select Voice Assistant.
    5. Now you can select your preferred voice assistant.
    Switching between voice assistant #2.png

    Your headphones may restart after switching Voice Assistant.

    Category:

    Product information

Headphone Support Guide

Need help to resolve some the most common headphone challenges?

Learn more

Bluetooth Guide

Har du brug for hjælp til Bluetooth parring? Denne guide kan hjælpe dig

Lær mere

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32 71 24 98

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-17.00
Saturday - Sunday: 10:00-16:00