JBL Reflect Mini NC
Vandtætte, totalt trådløse sport-øretelefoner med støjreduktion
Sold from 2020 until now
Getting started with your JBL Reflect Mini NC
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 6
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 97
- Dynamisk frekvensområde (Hz)
- 20 Hz – 20 kHz
- Impedans (ohm)
- 16
- Antal dynamiske enheder pr. øre
- 1
- Vægt (g)
- 46
- Charging Case Weight (oz)
- 1.6
- Vægt (g)
- 13.5
- Earpiece Weight (oz)
- 0.5
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth-frekvens
- 2.4 GHz – 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth sender-effekt
- 0 - 10dbm
- Bluetooth-version
- 5.1
- Charging case battery life (max hours)
- 14
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid med aktiv støjreduktion (timer)
- 6
- Maksimal spilletid (timer)
- 7
- Aktiv støjreduktion
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- Øretelefoner
- Ja
- Den berømte JBL-lyd
- Ja
- Genopladeligt batteri
- Ja
- Ægte trådløse
- Ja
- Vandtæt
- Ja
- Trådløse
- Ja
- IPX-rating
- IP67
- Indbygget Google Assistent
- Ja
- Baseret på Amazon Alexa Voice Service
- Ja
Designet til bevægelse, defineret af dig
Uanset om du dyrker yoga, gymnastik eller løber, er JBL Reflect Mini NC sports-øretelefonerne det perfekte match til din aktive livsstil. Med aktiv støjreduktion kan du fokusere på dit træningsmål uden forstyrrelser. Takket være Smart Ambient-teknologien er du stadig opmærksom på omgivelserne, og du kan snakke med vennerne. Hvert ørestykke forbindes øjeblikkeligt og uafhængigt, så du kan foretage opkald med den enhed, du foretrækker, og tildele unikke funktioner til venstre og højre. Med 21 timers spilletid, et udvalg af reflekterende farver og IPX7-vandtæthed er dette de ultimative trådløse sports-øretelefoner
Takket være den lange batteritid kan du afspille meget længere eller presse dig selv hårdere uden at skulle stoppe for at tage en opladningspause.
Bloker det, du ikke vil høre, eller hør mere af det, du gerne vil høre. Med Smart Ambient-teknologien kan du løbe sikkert på gaden eller snakke med vennerne, mens du træner igennem.
Vælg mellem tre forskellige ørespids-stabilisatorer for at finde en perfekt, stabil og behagelig pasform.
Med fremragende lyd, både indendørs og udendørs, får du det rette fokus og motivation til enhver situation, hvad enten du er i træningscenteret eller ude i naturen.
Hold det enkelt. Du er aldrig mere end et ord væk fra Hey Google eller Amazon Alexa, som er klar til at hjælpe dig med alt muligt - helt enkelt.
(*) Understøttes kun på Android. (**) Android 6.0 eller højere er påkrævet for fuld adgang til Alexa-funktioner, når denne enhed bruges.
Vær ikke bange for at presse dig selv hårdere. Med IP67-klassificeringen er JBL Reflect Mini NC ikke bare sved- og vandtætte, men ekstremt robuste, så de modstår den hårdeste træning og det vildeste vejr. Du kan endda skylle dem efter brug! Med det reflekterende JBL-logo og et udvalg af flotte farver bliver du både stilfuld og synlig.
Det er ligegyldigt, hvilket ørestykke du først tager ud af etuiet. Du kan foretage opkald, justere lydstyrken og bruge stemmeassistenten på begge ører. Denne fleksibilitet betyder, at du aldrig bliver forstyrret i din træning.
Dine øretelefoner klarer det hele. Mikrofoner til venstre og højre opfanger dig i stereo til telefonsamtaler. Tag dem ud, og musikken pauses automatisk. Du behøver ikke engang tænke over det.
Få endnu mere kontrol og personlig
tilpasning af din lytteoplevelse
med denne gratis app.
FAQs & How-Tos
11 results
-
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
* Location
Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.Was this helpful? Thank you for your feedback! -
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback! -
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).Was this helpful? Thank you for your feedback!
-
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
Things to try- “What’s the weather?”
- Play Niall Horan
- Play NPR on iHeartRadio
- Set a timer for 5 minutes
- What new skills do you have?
While Alexa is talking, press and release the Action button then say “Stop”.
For more information and things to try with Alexa, visit: www.amazon.com/alexadevicesWas this helpful? Thank you for your feedback! -
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones
Get your notifications
Double-tap the Action button.
Stop your Google Assistant
Touch the Action button.
Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.
For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones
Was this helpful? Thank you for your feedback! -
If the earbuds go into standby mode and turn off, you can still use them without putting them back into the charging case.
You can reactivate the headphones by pressing or touching the outside earbud itself.
Please note: They will be automatically powered off after 30 minutes of being in standby mode if they disconnect from Bluetooth. To reconnect, you will need to put the earbuds back in the charging case and take them off again.
It is possible to change the standby mode time with your headphones. To do this, go into the My JBL Headphones app and choose the Standby Time via Auto-off function. You can adjust the time to 15min, 1hr, etc., or you can choose “Never” if you want to keep the earbuds turn on at all times. Once you set the Auto-off, the earbuds will work according to the setting whether they connect to Bluetooth or disconnect.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
