JBL Live Pro 2 TWS
Totalt trådløse øretelefoner med støjreduktion
Sold from 2022 until now
Getting started with your JBL Live Pro 2 TWS
Documents & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 11
- Number of Microphones
- 6
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 105
- Dynamisk frekvensområde (Hz)
- 20 Hz - 20 kHz
- Impedans (ohm)
- 16
- Enhedsstørrelse
- dynamisk enhed på 11 mm / 0,43"
- Ørestykke
- 4,8 g per styk (9,6 g i alt)
- Opladningsetui
- 48,4 g
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth-frekvens
- 2.4 GHz - 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4 QPSK, 8DPSK
- Bluetooth sender-effekt
- < 12 dBm EIRP
- Bluetooth-version
- 5.2
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 10
- Maksimal spilletid (timer)
- 40
- Bluetooth
- Ja
- Charging cable
- Ja
- Stemmeassistent
- Ja
- Aktiv støjreduktion
- Ja
- Adaptiv støjreduktion
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- Den berømte JBL-lyd
- Ja
- Flerpunktsforbindelse
- Ja
- Genopladeligt batteri
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Multifunktionel TalkThru-knap
- Ja
- Touch-knapper
- Ja
- Ægte trådløse
- Ja
- Water Resistant
- Ja
- Trådløse
- Ja
- IPX-rating
- IPX5
- Ægte adaptiv støjreduktion
- Ja
Lyt og bliv hørt. Hele dagen, alle steder.
Hold stemningen høj hele dagen med disse stilfulde ledsagere til både arbejde og fritid. JBL Live Pro 2 øretelefonerne leverer op til 40 timers fantastisk JBL signaturlyd (med 10 timer i øretelefonerne + 30 timer i etuiet), hurtig opladning og Qi-kompatibel trådløs opladning, når batteriet skal have et boost. Ægte adaptiv støjreduktion eliminerer forstyrrelser, så du kan fordybe dig i lyden, mens Smart Ambient bevarer din opmærksomhed på omgivelserne. Det lukkede design med ovale rør sikrer bedre støjreduktion og forbedret lyd til dig, der foretrækker et mere strømlinet look. Har du noget at sige? Nyd klare, perfekte samtaler med seks stråleformende mikrofoner, eller tilslut din foretrukne stemmeassistent for at få nem, håndfri kontrol og forbindelse, uanset hvor livet fører dig hen.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback! -
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
Things to try- “What’s the weather?”
- Play Niall Horan
- Play NPR on iHeartRadio
- Set a timer for 5 minutes
- What new skills do you have?
While Alexa is talking, press and release the Action button then say “Stop”.
For more information and things to try with Alexa, visit: www.amazon.com/alexadevicesWas this helpful? Thank you for your feedback! -
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones
Get your notifications
Double-tap the Action button.
Stop your Google Assistant
Touch the Action button.
Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.
For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones
Was this helpful? Thank you for your feedback! -
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.Was this helpful? Thank you for your feedback!
-
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00