JBL Reflect Flow

JBL Reflect Flow

Ægte trådløse sportshovedtelefoner.

Sold from 2019 until now

Getting started with your JBL Reflect Flow

Getting started with your JBL Reflect Flow

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Enheds-størrelser (mm)
Number of Microphones
Enheds-følsomhed ved 1kHz/1mW (dB)
102 dB SPL
Dynamisk frekvensområde (Hz)
20Hz - 20kHz
Impedans (ohm)
Antal dynamiske enheder pr. øre
Vægt (g)
Charging Case Weight (oz)
Vægt (g)
Earpiece Weight (oz)
A2DP 1.3 AVRCP 1.5 HFP 1.6
2.402 GHz – 2.480 GHz
Bluetooth sender-modulation
Bluetooth sender-effekt
0 - 12.5dbm
Ladetid (timer fra helt afladet)
Maksimal spilletid (timer)
Charging cable
Lader lyd fra omgivelserne passere
Indbygget mikrofon
Smart opladningsetui
Indbygget Google Assistent
Håndfri opkald
Den berømte JBL-lyd
Genopladeligt batteri
Fjernbetjening på ørekopper?
Lynopladning (5 min. = 1 t spilletid)
Multifunktionel TalkThru-knap
Ægte trådløse

Designet til bevægelse. Defineret af dig.

Nyd friheden til at nå endnu længere med JBL Reflect Flow-hovedtelefonerne. Uanset om du er i træningscentret eller på farten, vil de ægte trådløse JBL Reflect Flow-hovedtelefoner fremme alle aspekter af din aktive livsstil. Du kan styre afspilningen, håndtere håndfri opkald og bruge din stemmeassistent. Tilmed er Reflect Flow hovedtelefonerne IPX7 vand- og svedtætte. De giver dig 10 timers uafbrudt spilletid plus 20 ekstra timer i opladningsetuiet. Du bliver også glad for Ambient Aware-funktionen, som lader dig høre, hvad der sker omkring dig, mens du nyder din musik. Og med TalkThru-funktionen kan du føre en samtale uden at tage hovedtelefonerne af. Reflect Flow giver dig den kraftfulde JBL-signaturlyd. Hovedtelefonerne er designet til bevægelse og sidder komfortabelt og sikkert takket være de justerbare ørepropper med Freebit-tilbehør.

​Med 10 timers spilletid i ørepropperne plus 20 ekstra timer i opladningsetuiet har du strøm til en hel uges træning eller en lang dags underholdning. Med bare 10 minutters lynopladning får du en ekstra times musik.
Bedre komfort og tilpasning med de ergonomiske silikoneørepropper og det patenterede Freebit™-tilbehør, som fås i tre størrelser.
Produktet er vand- og støvtæt (IP67), så du får ekstra holdbarhed og beskyttelse. Selv under den hårdeste træning og i al slags vejr.
Ambient Aware holder dig i kontakt med omgivelserne udendørs, og med TalkThru kan du nemt føre en samtale uden at tage hovedtelefonerne af.
Den dynamiske enhed på 5,8 mm leverer den berømte JBL-signaturlyd, som giver et kraftfuldt boost til alle dine playlister.
Håndter musik og opkald uden besvær, og få information fra din stemmeassistent med et tryk på en knap.
Oplev friheden ved den trådløse livsstil på farten. Nu kan du træne, høre musik og håndtere opkald uden at bekymre dig om sammenfiltrede ledninger.

FAQs & How-Tos

13 results
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  •                                                                          CLEANING THE PRODUCT V2.JPG CLEANING THE PRODUCT V3.JPG

    Use a clean cotton swab slightly moistened with alcohol to:
    1. Remove earwax and dirt from the ear tips on your earbuds.
    2. Clean the charging pads and ports on your earbuds and in the charging case respectively. Then use a dry and soft cotton to rub down the dust and lint.
    3. Clean the grooves on the cover and at the bottom of the charging case.
    After cleaning, make sure the charging case and earbuds are dry before putting the earbuds back into the charging case.

    We recommend that you repeat this operation every few weeks or so to keep your headphones clean and to not affect the charging speed and quality.
  • Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • 1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
  • This headphone does not feature volume control. You must manually control volume from your device.
  • If the left ear pod is silent, please perform a new pairing with the right pod like shown in the quick-start guide.
    Take them out of the charging case and click the  center button on both the left and the right pod 3 times.
    This forces a new pairing between the pods, and the left pod should automatically pair with the right pod from now on once you remove both pods from the charging case.

    If you still cannot get the Left ear to play, please perform a factory reset by placing both pods in the charging case, while the charging case is charging. Now press the button on the right pod, and hold it for more than 5 seconds. You have now reset to factory settings. (Please note: If you have performed a factory reset, you will need to remove the headphones or "forget this device" from any smart phone or tablet they were once connected to. This will allow your device to now search for the newly restored headphones under BT devices)

    The right pod is the primary, which is connected to your source, usually a smartphone.
    The left pod is the secondary, which connects to the right pod.

  • If the two buds lose connection to each other, you can choose to force-pair the main/right bud to the secondary/left bud or the other way around.
    For both buds, triple-click the button on one ear bud to pair with the other ear bud.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00


WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00