Studio 2 8IW
8-Inch In-Wall Loudspeaker
Sold from 2019 until now
Getting started with your Studio 2 8IW
Quick Start Guide & Downloads
Product Specifications
- Impedance
- 8 ohms
- Frequency Response
- 30 Hz to 20 kHz
- Sensitivity
- 88dB 2.83V @ 1m
Studio 2 8IW
The JBL Studio 2 architectural series immerses you in high-performance room-filling JBL sound with a nearly invisible profile, expertly engineered for custom home audio installation.
FAQs & How-Tos
5 results
-
No, in-ceiling speakers cannot be used in the wall due to speaker dimensions. A wall is not deep enough to accommodate the depth of an in-ceiling speaker. For in-wall speakers, you can install them in the ceilings without any depth issues. However, for quality listening, we recommend using architectural speakers according to their intended purpose.Was this helpful? Thank you for your feedback!
-
Apart from the driver materials, both the Studio 2 and Arena architectural speakers are quite the same. However, the Studio 2 series does deliver better high frequency versatility, thanks to the pivoting and level adjusting feature for the tweeter. The pivoting feature allows you to position/direct the tweeter toward the listening area. The level adjusting feature allows you to tune the high frequency (Zero to -3dB) as needed. These features are also available on select Harman Luxury Architectural speakers (Revel) as well.Was this helpful? Thank you for your feedback!
-
The audio level adjustment is a dedicated control for adjusting the tweeter’s high frequency volume. It allows you attenuate up to 3dB, based on your environment and/or preference.Was this helpful? Thank you for your feedback!
-
In-wall speakers will work better for stereo listening because the speaker will be facing directly at you instead of above you. Note: Stereo imaging requires the listening position (“sweet spot”) to be dead center, equal distance, from the front left and right speakers.Was this helpful? Thank you for your feedback!
-
All of our in-wall/in-ceiling speakers are designed to be used in a wall without the need for a back-box. The specs provided are based on no back-box. However, when adding a back-box (really only possible when doing new construction), you will improve the low frequency response a bit, getting a tighter bass response.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)