How To

Support Overview / How To

How To

1217 results
  • How to set up your device with Android or iOS
    1. Power on your JBL LINK speaker.
    2. Verify that you are connected to the right Wi-Fi network on your smartphone.
    3. Open your Google Home app Google Home app.
    4. Enable Bluetooth BT ICON
    5. Enable Location Service location icon(Android Only)
      1. Make sure you have permitted the Google Home app to view your location.
    6. First option NEXT oPTTap Addaddd Next topSet up device Setup device NEXT opSet up new devices in your home home icon
    7. Second  option NEXT NEXTTap Disocvery Next topX device found Setup ICON deviceNEXT opSelect Home locationhome icon
    8. Follow the instruction on screen to add your new JBL LINK speaker.

    You are now all set and can enjoy your LINK device!
  • How to set up your microphone
    Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.

    Check that the PC is using the correct recording device.

    1. Go to Control Panel

    2. Select  Sound 

    3 Select  Recording

    4. Make sure to select the proper recording device.
    1. Right-click on it Quantum headset.
    2. Now select "Set Default Device" or "Select Default Communication Device"
    5. Check the microphone levels by right-click on your Quantum headset.

    6. Go to Properties

    7. Chose Levels and adjust accordingly
  • How to set up your microphone
    Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.

    Check that the PC is using the correct recording device.

    1. Go to Control Panel

    2. Select  Sound 

    3 Select  Recording

    4. Make sure to select the proper recording device.
    1. Right-click on it Quantum headset.
    2. Now select "Set Default Device" or "Select Default Communication Device"
    5. Check the microphone levels by right-click on your Quantum headset.

    6. Go to Properties

    7. Choose Levels and adjust accordingly
  • How to set up your microphone

    Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
    FLIP DOWN.png


    How to check your PC settings for the correct recording device
    1. Go to Control Panel
    Control panel.png
    2. Select Hardware and Sound
    Step 2.PNG
    3. Click on Sound
    Step 3.PNG
    3 Select  Recording
    Recording tap.jpg

    4. Make sure to select the proper recording device.

    1. Right-click on it Quantum headset.

      Set default communication device.jpg

    2. Now select "Set Default Device" or Select "Default Communication Device"

      Set default communication device 2.jpg

    5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
    Properties.jpg

    6. Choose Levels.
    Levels 1.jpg

    7. Adjust accordingly.
    Levels 2.jpg  

    Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
    Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
    Volume issue Q800 - Part3.png

    If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
    Volume issue Q800 - Part4.png

    Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)
    Volume issue Q800 - Part5.png

  • How to show the current software version
    To show the current firmware version on your JBL TUNER device, go through the following steps.
    1. Turn on the JBL TUNER.
    2. Press and hold this three-button combination: DAB/FM+ Volume+ and Preset 5, simultaneously for 3-4 seconds.
    3. In the display, you will see a combination of letters and numbers. This is the current software version.
    4. See picture below as illustration.
    Tuner Software

    The new firmware version released is V.0.0.57 (shown in the picture above).
    To get the latest version, ask our customer service for a guide and an upgrade file.

     
  • How to stream music with your Apple device
    Our new JBL Link Music and Link Portable both support Apple AirPlay 2. Pick up your Apple device, use your favorite music streaming service, and connect to the JBL speaker! Please note: before using Apple AirPlay 2, you will need to install it on your WiFi network, either using the Google Home app or Apple Home app ( your choice! ).
  • How to switch between Active Noise Cancelling and TalkThru
    Onboard Active Noise Cancelling is controlled by the multi-function button on the rear of the left ear-cup. Switched on by default, you can SINGLE press the ANC button to toggle it On/Off  and LONG press to active TalkThru. Turn on ANC again by a single press on the multi-function button.
  • How to switch between Game and Chat balance
    Yes, you can adjust the game and chat audio balance by rotating the dial-up and down. When you rotate the dial, you'll feel a notch that indicates the balance is 50% game and 50% chat. The slider on Quantum ONE is different and has no notch but instead a visual indicator.
  • How to switch between voice assistants using the My JBL Headphone app
    The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

    Switching between voice assistant #1.png

    You can change the default assistant in the ‘My JBL Headphones’ app:
    1. Open the My JBL Headphones app on your device.
    2. Select the headphones you are connected too.
    3. Go to Settings by clicking the symbol in the top right corner.
    4. Select Voice Assistant.
    5. Now you can select your preferred voice assistant.
    Switching between voice assistant #2.png

    Your headphones may restart after switching Voice Assistant.
  • How to Turn Off or Snooze the Alarm
    Once an alarm is set and starts to ring, it can be snoozed by tapping the large central knob/button on the top of the unit (circled in yellow in the image below). If this button is held for more than 2 seconds it will turn off the alarm.
    JBL_HORIZON2BUTTONCrop

    The duration of the snooze cannot be changed and is fixed to 9 minutes. The alarm will continue to ring for 3 minutes and if not turned off or snoozed, it will automatically snooze after this time. It will automatically snooze for a maximum of 3 times, but if the snooze button is used before this occurs, the alarm can be snoozed an unlimited number of times.

    Once snoozed, the display shows the time that the alarm will next ring.

    To keep the radio playing after the alarm is turned off, press one of the 3 preset buttons or the DAB/FM button as desired.
  • How to Turn off the Lightshow
    Press and hold the Lightshow button for more than 2 seconds to turn off the Lightshow.
  • How to Turn off your TWS Headphones
    1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
< 1 ... 51 52 53 54 55 ... 103 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a support agent
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat With Us

Chat With Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)