How To
How To
1217 results
-
You can adjust equalizer, RGB LED effects, calibrate Quantum ONE headtracking, change microphone settings and update the headset's firmware.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
Here is a list of what the LED lights mean.
- Light OFF: Power OFF, no charger connected, OR charger connected, fully charged.
- RED light ON: Power OFF, charger connected and charging.
- BLUE light flashing: Power ON, no Bluetooth connected.
- Constant BLUE light: Power ON, connected to Bluetooth device.
- RED/BLUE light flashing: Power ON, in pairing mode.
- RED light flashing: Power ON, low battery.
Was this helpful? Thank you for your feedback! -
The battery LED's show how much the battery is charged on your LINK 10 or LINK 20 speaker.Was this helpful? Thank you for your feedback!
-
The Wi-Fi indicator shows the signal strength between your speaker and Wi-Fi router. 3 bars = perfect signal 2 bars = good signal 1 bar = low/poor signal (which might cause dropouts or other issues)Was this helpful? Thank you for your feedback!
-
The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.Was this helpful? Thank you for your feedback!
-
It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
Once set up, you can directly access it through the remote control or within the JBL ONE App.Was this helpful? Thank you for your feedback! -
There is a constant red light in the LED while charging takes place. When charging is complete, the diode goes dark.Was this helpful? Thank you for your feedback!
-
During charging, the LED lights red constantly. When it is fully charged, the LED goes out. No light.Was this helpful? Thank you for your feedback!
-
Sometimes, when the soundbar is connected to a digital TV, the audio may not synchronize with the video. If the video is behind the audio, adjust the audio delay time to match the video.
You can set the audio delay time between 0 msec and 250 msec.
Note: The audio delay time you specify may not be exact, depending on the played content.
The audio sync function will not resolve instances where the video is ahead of the audio.Was this helpful? Thank you for your feedback! -
Audio feedback turns on tones that let you know that something is happening on the product. When Audio feedback is ON, you will hear tones for:
- Bluetooth Pairing.
- SoundShift on/off.
- JBL Connect Pairing Mode (Boost TV only)
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a support agent
Call us now at:
(800) 336-4525
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat With Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)