JBL Tune 130NC TWS - White - True wireless Noise Cancelling earbuds - Hero JBL Tune 130NC TWS - White - True wireless Noise Cancelling earbuds - Front JBL Tune 130NC TWS - White - True wireless Noise Cancelling earbuds - Back
JBL Tune 130NC TWS - White - True wireless Noise Cancelling earbuds - Hero
  • JBL Tune 130NC TWS - White - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Tune 130NC TWS - Blue - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Tune 130NC TWS - Sand - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Tune 130NC TWS - Black - True wireless Noise Cancelling earbuds - Swatch Image

JBL Tune 130NC TWS

Tackle your day one song at a time with the JBL Tune 130NC TWS. True wireless earbuds give you 40 hours of exceptional JBL Pure Bass Sound, while the ergonomic and water-resistant design gives you all-day comfort in any weather. Connect calls simply and seamlessly with 4 mics that cancel out ambient noises offering perfect calls anywhere. And with Active Noise Cancelling and Smart Ambient technology, you choose whether you want to tune out the world or engage with your surroundings. Best of all, the JBL Headphones App lets you personalize your entire listening experience. Stay connected to your world, your way.

Product Specifications

General Specifications

Driver size (mm) 10

Audio Specifications

Driver sensitivity at 1kHz/1mW (dB) 103
Dynamic frequency response range (Hz) 20 Hz – 20 kHz
Impedance (ohms) 32
Number of drivers per ear 1

Dimension Specifications

Charging Case Weight (oz) 1.4
Earpiece Weight (oz) 0.4
Charging Case Weight (g) 40.4
Earpiece Weight (g) 11.4

Control Connect Specifications

Bluetooth profiles A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency 2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation GFSK, π/4-DQPSK, 8-DPSK
Bluetooth transmitter power 0 - 12dbm
Bluetooth version 5.2
Please consult the documents for in-depth specs

Documents & Downloads

Videos

What’s in the Box

  • 1 x JBL Tune 130NC TWS headphones
  • 1 x USB Type-C charging cable
  • 1 x 3 Sizes of eartips
  • 1 x Charging case
  • 1 x Quick Start Guide / Safety Sheet (S / i)
  • 1 x Warranty / Warning (W / !)
JBL Tune 130NC TWS - What's in the Box

FAQs & How-Tos

Re-establishing Volume Levels/Balance between Earbuds
As with all in-ear headphones, our range of TWS headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds and your ears. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing.If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). The should remove the wax and resolve the volume/balance issues. 
Cleaning Instructions for Re-establishing Charging
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.Repeat until the contact points are visibly clean, and charging should work as designed.Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.This procedure can be performed on all TWS earphones and cases.
Sweatproof Information (IPX4)
This unit is IPX4 rated, which means that it is sweatproof (suitable for working out) and can withstand water splashes from any direction. However, the unit is not waterproof and should never be submerged in water.
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your deviceAlways get the latest driver version available for your Computer/PC/Laptop.To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 
My JBL Headphones App Support
This headphone is supported by the My JBL Headphones App.
TWS Left & Right Not Pairing Together
The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order. Forget/unpair the headphones on your device.Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.Pair the headphones to your device and see if this resolves the problem.If manual pairing does not fix the problem, forget/unpair the headphones on your device again.Initiate a Product Reset to reset the earbud’s Bluetooth connection. Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices againFollow the Product Reset instructions in your Owner's Manual/Quick Start Guide.Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.Pair the buds to your Source Device.
My JBL Headphones App Support
This headphone is supported by the My JBL Headphones App.

Headphone Support Guide

Need help to resolve some the most common headphone challenges?

Learn more

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (EST)
Sat - Sun: 9:00 am - 5:00 pm (EST)

Chat With Us

Chat With Us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

message

Text Us

Chat with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 8:00 pm (EST)