JBL Quantum Stream Studio

JBL Quantum Stream Studio

USB streaming microphone

Sold from 2023 until now

Getting started with your JBL Quantum Stream Studio

Getting started with your JBL Quantum Stream Studio

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Power required/consumption
5 V ⎓ 500 mA
Frequency response
50 Hz - 16 kHz
Sensitivity
-37±3 dB (1 kHz@1 Pa, 0 dB = 1 v/Pa)
Maximum SPL
110 dB
Sample rates
44.1kHz / 48 kHz / 96 kHz / 192 kHz
Bit rate
16 / 24 bits
Capsules
3 * 14 mm Electret Condenser Microphones
Polar patterns
Cardioid, omnidirectional, stereo, bi-directional
Headphones Amplifier Impedance
16 ohms / 32 ohms
Headphones Power output (RMS)
42 mWrms per channel (Load = 32 ohms)
Headphones THD
<0.5% (Load = 32 ohms)
Headphones Frequency response
20 Hz - 20 kHz
Headphones Signal to noise
92 dB with 48kHz sample rate, 93dB with 192kHz sample rate (A-weighted)
Weight Mic with Stand
582 g / 1.283lbs

Sound is survival Let your voices be heard

Sound like a pro with the JBL Quantum Stream Studio microphone. Whether you're gaming, streaming or recording by yourself, with a co-host, or with a roomful of guests, you can quickly switch between four different pickup patterns so that everyone can be heard. No additional gear required to level up your game. You'll always know how loud things are getting thanks to the RGB VU meter, and the dynamic range compressor makes sure everyone's voice stays at the same level. Streaming a game? Fully control the balance between the game sounds and your own commentary. Use the included JBL QuantumENGINE PC software to adjust EQ, apply noise reduction, or customize the mic's radiant RGB lighting.

Stream or record one, two, or more voices through three lightweight, fast-moving, and sensitive (-37dB) 14mm cardioid condenser mics, all with a wide, flat frequency range (50~16kHz). At 192kHz/24 bits recording, your streams and recordings will sound studio-quality and capture every nuance of what you're saying.
A single button on the microphone's front quickly changes between four voice-pickup patterns: cardioid for when you're recording or streaming by yourself, bi-directional if you're interviewing someone on the opposite side of the mic, stereo if you and your co-host are sitting on the same side of the mic or you're recording a musical instrument, and omnidirectional for any stream or podcast where more than two people are talking.
Don't worry about trying to talk at the same volume all the time: the dynamic range compressor keeps your voice from clipping if you get too loud, or gives you a boost if you're speaking too softly.
Feel a cough coming on? Just tap the touch sensor on top of the mic to mute yourself briefly. The RGB lights around the grille will turn red to remind you that your audience can't hear you.
Easily keep an eye on your volume levels with the real-time RGB VU meter that surrounds the control knob. Too low? Try turning up the gain. Going into the red? Your listeners might be hearing clipping and distortion, so ease back.
Monitor your voice directly from your headphones using the 3.5mm connection, controlling your volume on the microphone itself and using the included JBL QuantumENGINE software to adjust your EQ. You can also easily control the balance between PC sound and the amount of voice rerouted to your headset while streaming. The Audio/Voice Monitor feature allows for the best balance between the sound of your game and the level of your voice.
Use the included stand to hold the mic, or if you've already got a boom arm or C-clamp system in your setup, it will screw right into either.
The JBL Quantum Stream Studio mic stands firm on the table thanks to the sturdy alloy stand made of zinc. Premium components such as the metal body and grill make this mic suitable for any professional streaming setup.
With the included JBL QuantumENGINE software, you can quickly adjust EQ and gain to fine-tune your sound, mute and unmute yourself, apply noise reduction, perform a quick mic test, and even customize the mic's radiant RBG lighting, all from your computer screen.

FAQs & How-Tos

5 results
  • You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.
  • You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.
  • The JBL Quantum Stream microphone is compatible with the JBL QuantumENGINE software. You can customize or use the following settings/features via the JBL QuantumENGINE:

    Microphone settings
    Polar patters (Cardioid / Onnidirectional)
    Equalizer
    RGB LED Light colors + animations/effects
    Update firmware + software
  • If your teammates can not hear you, make sure of the following:

    USB is correctly plugged in
    Only one voice chat application is in use while in-game.
    The mic input is set to JBL Quantum Stream.
    Mic gain is not turned all the way down
    Mic is not muted (mute/unmute by pressing the touch panel on top of the mic). By default the RBG will indicate red for muted, and green for unmuted(active).

     

  • JBL Quantum 300, 350, 400, 600, 610, 800, 810 ONE, TWS and Stream are working with the QuantumENGINE

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (800) 336-4525

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)