JBL Tune 600BTNC

JBL Tune 600BTNC

Trådløse øredekkende hodetelefoner med aktiv støyreduksjon.

Sold from 2018 until now

Getting started with your JBL Tune 600BTNC

Getting started with your JBL Tune 600BTNC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Driver size (mm)
32.0
Driver sensitivity at 1kHz/1mW (dB)
100dB
Dynamic frequency response range (Hz)
20 Hz - 20 kHz
Impedance (ohms)
32.0
Number of drivers per ear
1.0
Weight (g)
173.0
Weight (oz)
6.1
Bluetooth profiles
HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.5
Bluetooth frequency
2.402GHz-2.48GH
Bluetooth transmitted modulation
GFSK, /4DQPSK, 8DPSK
Bluetooth version
4.1
Charging time (hours from empty)
2.0
Maximum music play time with ANC off (hours)
22.0
Maximum music play time with ANC on (hours)
12.0
Maksimum spilletid (timer)
22.0
Maximum talk time (hours)
22.0
Bluetooth
Ja
Active Noise Cancelling
Ja
Built-in Microphone
Ja
Detachable Cable
Ja
Flat-fold design
Ja
Hands Free Call
Ja
JBL Pure Bass Sound
Ja
On-ear
Ja
Rechargable battery
Ja
Remote control on ear cups?
Ja
Speed charge
Nei
Wireless
Ja

Nyt musikken din uten støy.

Vi introduserer de nye JBL TUNE600BTNC – trådløse øredekkende hodetelefoner med støyreduksjon som veier lite og kan brettes sammen, en kompakt løsning for hverdagsbruk. JBL TUNE600BTNC har 32 mm JBL-driver som bidrar til å levere JBL Pure Bass-lyd. Lyd som kan nytes uten unødvendig støy i mer enn 12 timer trådløst. De lades helt opp på kun to timer. Takket være den medfølgende avtakbare kabelen, kan du nyte musikken så lenge du vil med kabelen tilkoblet, med eller uten aktiv støyreduksjon. JBL TUNE600BTNC er laget av solide materialer og designet i fire friske farger. De lar deg raskt koble til din verden med knapper på øreklokkene, for enkel hands-free håndtering av samtaler og musikk.

Hold støyen ute, så du kan nyte musikken din.
I over 70 år har JBL produsert den presise og imponerende lyden du kan høre på store arrangementssteder over hele verden. Disse hodetelefonene reproduserer den samme JBL-lyden, med bass som er både dyp og kraftig.
Strøm trådløst musikk med høy kvalitet fra smarttelefon eller nettbrett.
Lades opp på 2 timer
Kontroller lyden og håndter samtaler enkelt fra hodetelefonene, takket være den praktiske fjernkontrollen med tre knapper og en mikrofon.
Lette materialer gjør disse komfortable på ørene dine, og den solide konstruksjonen gjør at du kan brette disse sammen og ut igjen år etter år.

FAQs & How-Tos

8 results
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.
  • Yes. The 600BTNC features an audio cable that you can use if you do not wish to use the headphones via wirelessly.
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • In order to reset the headphones: 

    Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device. 
    When reseting, LED will blink faster. 
  • Yes, but only via cable, and noise cancelling cannot be activated meanwhile. Since the charging socket is located on top of the ear pod, adjustment is limited in that direction while the micro-USB plug is inserted.
  • No. The 600BTNC headphone does not feature any IPX rating that protects it against sweat or water. Over exposure to water can compromise the controls on the headphones.
  • This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00