JBL Tune 600BTNC
Trådløse øredekkende hodetelefoner med aktiv støyreduksjon.
Sold from 2018 until now
Getting started with your JBL Tune 600BTNC
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 32.0
- Driver sensitivity at 1kHz/1mW (dB)
- 100dB
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 32.0
- Number of drivers per ear
- 1.0
- Weight (g)
- 173.0
- Weight (oz)
- 6.1
- Bluetooth profiles
- HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.5
- Bluetooth frequency
- 2.402GHz-2.48GH
- Bluetooth transmitted modulation
- GFSK, /4DQPSK, 8DPSK
- Bluetooth version
- 4.1
- Charging time (hours from empty)
- 2.0
- Maximum music play time with ANC off (hours)
- 22.0
- Maximum music play time with ANC on (hours)
- 12.0
- Maksimum spilletid (timer)
- 22.0
- Maximum talk time (hours)
- 22.0
- Bluetooth
- Ja
- Active Noise Cancelling
- Ja
- Built-in Microphone
- Ja
- Detachable Cable
- Ja
- Flat-fold design
- Ja
- Hands Free Call
- Ja
- JBL Pure Bass Sound
- Ja
- On-ear
- Ja
- Rechargable battery
- Ja
- Remote control on ear cups?
- Ja
- Speed charge
- Nei
- Wireless
- Ja
Nyt musikken din uten støy.
Vi introduserer de nye JBL TUNE600BTNC – trådløse øredekkende hodetelefoner med støyreduksjon som veier lite og kan brettes sammen, en kompakt løsning for hverdagsbruk. JBL TUNE600BTNC har 32 mm JBL-driver som bidrar til å levere JBL Pure Bass-lyd. Lyd som kan nytes uten unødvendig støy i mer enn 12 timer trådløst. De lades helt opp på kun to timer. Takket være den medfølgende avtakbare kabelen, kan du nyte musikken så lenge du vil med kabelen tilkoblet, med eller uten aktiv støyreduksjon. JBL TUNE600BTNC er laget av solide materialer og designet i fire friske farger. De lar deg raskt koble til din verden med knapper på øreklokkene, for enkel hands-free håndtering av samtaler og musikk.
Hold støyen ute, så du kan nyte musikken din.
I over 70 år har JBL produsert den presise og imponerende lyden du kan høre på store arrangementssteder over hele verden. Disse hodetelefonene reproduserer den samme JBL-lyden, med bass som er både dyp og kraftig.
Strøm trådløst musikk med høy kvalitet fra smarttelefon eller nettbrett.
Lades opp på 2 timer
Kontroller lyden og håndter samtaler enkelt fra hodetelefonene, takket være den praktiske fjernkontrollen med tre knapper og en mikrofon.
Lette materialer gjør disse komfortable på ørene dine, og den solide konstruksjonen gjør at du kan brette disse sammen og ut igjen år etter år.
FAQs & How-Tos
8 results
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes, you can activate the noise reduction circuits alone, with no connection to a source device by Bluetooth or cable. The headphones will stay on as long as there is power in the battery, which is close to 30 hours for pure NC function. Please note that there is a slight residual noise from the NC system, which will be drowned out by music playing, or by surrounding noise such as airplane noise. If you use the NC in surroundings that are near quiet to begin with, you may not get an improvement in noise level.Was this helpful? Thank you for your feedback!
-
Yes. The 600BTNC features an audio cable that you can use if you do not wish to use the headphones via wirelessly.Was this helpful? Thank you for your feedback!
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
In order to reset the headphones:
Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device.
When reseting, LED will blink faster.Was this helpful? Thank you for your feedback! -
Yes, but only via cable, and noise cancelling cannot be activated meanwhile. Since the charging socket is located on top of the ear pod, adjustment is limited in that direction while the micro-USB plug is inserted.Was this helpful? Thank you for your feedback!
-
No. The 600BTNC headphone does not feature any IPX rating that protects it against sweat or water. Over exposure to water can compromise the controls on the headphones.Was this helpful? Thank you for your feedback!
-
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
