JBL Live 300TWS

JBL Live 300TWS

Ekte trådløse øretelefoner med Smart Ambient

Sold from 2019 until now

Getting started with your JBL Live 300TWS

Getting started with your JBL Live 300TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
5.6
Driver sensitivity at 1kHz/1mW (dB)
95
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
16
Number of drivers per ear
1
Charging Case Weight (oz)
1.9
Earpiece Weight (oz)
0.5
Lade-etuiets vekt (g)
53.7
Øreproppens vekt (g)
13.6
Bluetooth version
5.0
Bluetooth profiles
A2DP 1.3, AVRCP 1.5, HFP 1.6
Bluetooth frequency
2.402 GHz – 2.480 GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Charging time (hours from empty)
2
Maksimum spilletid (timer)
6
IP Code
IPX5
Charging cable
Ja
Voice Assistant integration
Ja
Ambient Aware
Ja
Built-in Microphone
Ja
Hands Free Call
Ja
JBL Signature Sound
Ja
Sweat Proof
Ja
TalkThru
Ja
True Wireless
Ja
Touch-knapper
Ja
Wireless
Ja
Charging case
Ja
Speed charge
Ja
Rechargable battery
Ja
Bluetooth
Ja

Vær tilkoblet til musikken din, og din egen verden, til enhver tid.

Vær din egen herre. Med JBL LIVE 300TWS øretelefoner har du alltid tilgang til musikken du liker. Helt trådløst, uten kabler – den utrolige signaturlyden fra JBL gir deg friheten du trenger. Ton inn og ut med støydemping, vær på alerten med Ambient Aware eller bruk TalkThru til å chatte med venner – alt gjennom øretelefonene. Stemmeassistent, håndfrie anrop, lydstyrke- og støykontroll – alt er tilgjengelig gjennom berøringskontrollene. Hurtiglading gjør at du aldri trenger å gå uten musikk. Velg mellom en rekke farger for å finne det perfekte paret. Liten størrelse, heftig lyd. (*) Kun støttet på Android. (**) Android 6.0 eller nyere kreves for full tilgang til Alexa-funksjoner når du bruker denne enheten.

JBL LIVE 300TWS-øretelefoner er kanskje små, men de har kraften du forventer av JBL.
Kontroller verdenen rundt deg. Med Ambient Aware kan du umiddelbart gå fra å lytte til musikk, til å fokusere på omgivelsene. Snakk med venner, uten å ta ut øretelefonene, med TalkThru. Sveip på øretelefonene for å aktivere det.
Du trenger aldri å være uten musikk. JBL LIVE 300TWS-øretelefoner gir deg seks timer med musikk, med bare én opplading. Legg dem inn i ladeesken for å få 14 timer til med lytting. Få enda en time til på bare 10 minutter.
JBL LIVE 300TWS-øretelefoner er helt trådløse, uten noe som helst som holder deg tilbake.
Uansett hvor i verden du er, og hva du gjør – ta med deg musikken og forbli tilkoblet med perfekte anrop i stereo, uten bakgrunnsstøy. Berøringskontroll gir deg total lyttefrihet, med håndfri-funksjonalitet og helt uten distraksjoner.
Med stemmeassistenten har du Google Assistant og Amazon Alexa rett i øret, slik at det alltid er lett å få tak i det du vil ha. Velg en av dem med My JBL Headphones-appen, så har du alt du trenger. Sveip på øretelefonene for å aktivere det. (*) Kun støttet på Android. (**) Android 6.0 eller nyere kreves for full tilgang til Alexa-funksjoner når du bruker denne enheten.
Velg paret du liker best. JBL LIVE 300TWS-øretelefoner er ordentlig stilige, og finnes i en rekke farger.
Lytt dagen lang, uten å føle ubehag. JBL LIVE 300TWS-øretelefoner har fire stabilisatorstørrelser.
Aldri la dårlig vær eller en hard treningsøkt stå i veien. JBL LIVE 300TWS-øretelefoner er svette- og vannbestandige, med IPX5-godkjenning.
Takket være Fast Pair levert fra Google, vil din JBL LIVE 300TWS koble seg til din Android-enhet i det øyeblikket du tar dem ut av esken. Du kan også enkelt pare flere enheter ved å trykke på enhetenes skjermer.

FAQs & How-Tos

19 results
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
    * Location
    Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
    Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
    Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
  • To re-establish the functionality of the Advanced Swipe Controls (details in the image below), first update the My JBL Headphones app in the Google Play/App Store.
    After the installation is completed, pair the earbuds to your phone/tablet through Bluetooth and open the app.
    The earbuds will be detected and displayed in the app and you should see that a Firmware update is available.

    L300TWSFAQ.png
    Note: Advanced touch controls are deactivated by default, in the My JBL Headphones app go to Settings Settings.png once your earbuds are displayed, then select Gestures and enable Advanced Swipe Controls. You can now select each function and assign it to a specific gesture.

    HPAPPSW1.png HPAPPSW2.png
    HPAPPSWIPE1.png HPAPPSWIPE2.png
     
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00