JBL Go 2

JBL Go 2

Bærbar Bluetooth-højttaler

Sold from 2018 until now

Predecessor Product: JBL Go
Successor Product: JBL Go 3

Getting started with your JBL Go 2

Getting started with your JBL Go 2

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Udgangseffekt (W)
3
Dynamisk frekvensområde (Hz)
180Hz – 20kHz
Mål (cm)
8.6 x 7.1 x 3.2
Mål (inch)
3.4 x 2.8 x 1.3
Vægt (kg)
0.18
Vægt (lbs)
0.39
Bluetooth-profiler
A2DP V1.2, AVRCP V1.5 HFP V1.5, HSP V1.2
Bluetooth-frekvens
2.402-2.480GHz
Bluetooth sender-modulation
GFSK/DQPSK/8DPSK
Bluetooth sender-effekt
0-4dBm
Bluetooth-version
4.1
Ladetid (timer)
2.5
Spilletid (timer)
5
3,5 mm lydindgang
Ja
Bluetooth
Ja
Charging cable
Ja
Højttalertelefon
Ja
Vandtæt
Ja
Wireless
Ja
Genopladeligt batteri
Ja

Grab and go.

JBL GO 2 er en vandtæt Bluetooth-højttaler med alle funktioner, som du kan tage med dig overalt. Afspil musik trådløst via Bluetooth i op til 5 timer med kontinuerlig JBL-kvalitetslyd. Med sit nye vandtætte IPX7-design giver GO 2 musikelskere mulighed for at tage deres højttalere med til swimmingpoolen eller stranden. GO 2 giver dig også krystalklare konferenceopkald med den indbyggede støjreducerende højttalertelefon. Med kompakt design og 12 iøjnefaldende farver hæver GO 2 din stil til nye højder.

Afspil trådløs lyd i høj kvalitet fra din smartphone eller tablet.
Det indbyggede genopladelige li-ionbatteri giver op til 5 timers afspilningstid.
Det vandtætte IPX7-kabinet gør GO 2 til det perfekte valg, når du vil nyde musik på stranden og ved - eller sågar i - swimmingpoolen.
Nyd godt af krystalklare konferenceopkald over højttaleren med den støjlfri højttalertelefon.
Hvis der ikke er mulighed for at bruge Bluetooth®, kan du bare tilslutte lydkablet til højttaleren og nyde din musik alligevel.

FAQs & How-Tos

6 results
  • If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.
  • First, remove the speaker from your source device's Bluetooth settings.
    Power on the speaker, then press and hold the Volume + button and Bluetooth button together for 3-5 seconds until the speaker turns off.
    Once turned off, the speaker has been reset to the factory default settings.
  • Press the power button located on the far Left top of the speaker. If this is your first time pairing the device, the speaker will automatically go into pairing mode. Make sure that the product you are attempting to pair to is in search mode and in bluetooth range. The Go 2 should pop up on discoverable devices. Choose the Go 2 option and you will be connected within a few seconds.
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • To skip tracks forward, double click the PAUSE/PLAY to advance to the next track. Please note: You can only skip tracks forward. This speaker does not have the capability to skip to the previous track.
  • This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00