JBL Live 770NC

JBL Live 770NC

Trådløse over-ear-hovedtelefoner med ægte adaptiv støjreduktion

Sold from 2023 until now

Getting started with your JBL Live 770NC

Getting started with your JBL Live 770NC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Enheds-størrelser (mm)
40
Number of Microphones
2
Enheds-følsomhed ved 1kHz/1mW (dB)
100
Dynamisk frekvensområde (Hz)
20 Hz – 20 kHz
Impedans (ohm)
32
Audio Cable Length (ft)
.7
Audio Cable Length (m)
.2
Dybde (cm)
2.7
Ear Cup Depth (in)
1.1
Højde (cm)
9.3
Ear Cup External Height (in)
3.7
Bredde (cm)
7.6
Ear Cup External Width (in)
3.0
Indre bredde (cm)
5.8
Ear Cup Internal Height (in)
2.3
Indre højde (cm)
4.0
Ear Cup Internal Width (in)
1.6
Hovedtelefonernes kabel-længde (m)
.2
Headphone Cable Length (ft)
.7
Vægt (g)
256
Vægt (oz)
9
Bluetooth-profiler
A2DP v1.4, HFP 1.8, AVRCP v1.6.2
Bluetooth-frekvens
2.4 GHz – 2.4835 GHz
Bluetooth sender-modulation
GFSK, π/4-DQPSK, 8-DPSK
Bluetooth sender-effekt
< 10 dBm (E.I.R.P)
Bluetooth-version
5.3
Ladetid (timer fra helt afladet)
3
Maksimal spilletid uden aktiv støjreduktion (timer)
65
Maksimal spilletid med aktiv støjreduktion (timer)
50
Maksimal spilletid (timer)
65
Taletid (timer)
33
Spatial Sound
Ja
Ægte adaptiv støjreduktion
Ja
JBL Headphone App
Ja
Audio cable
Ja
Bluetooth
Ja
Charging cable
Ja
Stemmeassistent
Ja
Aktiv støjreduktion
Ja
Adaptiv støjreduktion
Ja
Lader lyd fra omgivelserne passere
Ja
Indbygget mikrofon
Ja
Aftageligt kabel
Ja
Håndfri opkald
Ja
Den berømte JBL-lyd
Ja
Flerpunktsforbindelse
Ja
Over-ear
Ja
Genopladeligt batteri
Ja
Lynopladning (5 min. = 1 t spilletid)
Ja
Multifunktionel TalkThru-knap
Ja
Trådløse
Ja

Trådløse over-ear-hovedtelefoner med ægte adaptiv støjreduktion og Smart Ambient, der leverer JBL-signaturlyd

JBL Live 770NC-hovedtelefoner giver dig kraftfuld JBL-signaturlyd i en behagelig over-ear-hovedbøjlestil. Ægte adaptiv støjreduktion med Smart Ambient-teknologi sørger for, at du undgår forstyrrelser, når du er dybt inde i dit flow. Hvis du hellere vil holde ørerne åbne til verden omkring dig, kan du endda føre en samtale uden at tage hovedtelefonerne af. Få nem adgang til din foretrukne stemmeassistent med enten et aktiveringsord eller et tryk på ørekapslen for at afspille din yndlingsplayliste, sms’e din ven, tjekke vejret og meget mere. Du får 65 timers (50 timer med BT+ANC slået til) musikstreaming. Har du brug for endnu mere? 5 minutters lynopladning giver dig fire timer ekstra. JBL Live 770NC opretter forbindelse til to Bluetooth®-enheder samtidigt, så du aldrig behøver gå glip af et opkald, mens du ser en film på din tablet.

Sammen med den kraftfulde JBL-signaturlyd leverer enheder på 40 mm den omsluttende JBL Spatial Sound, der forvandler alt stereoindhold fra enhver enhed til virtuel surroundlyd.
Afspil lyd trådløst i høj kvalitet selv ved lavere bithastigheder med den nyeste Bluetooth-teknologi.  Audiotilstand giver dig den bedst mulige lyd, mens videotilstand sikrer, at lyden og billederne i dine film og spil altid er synkroniseret. (*) Tilgængelig via OTA-opdatering på et senere tidspunkt.
Ægte adaptiv støjreduktion med fire støjfølsomme mikrofoner betyder nul forstyrrelser, når du vil fokusere på dine studier eller fordybe dig i musikken. Og hvis du vil høre verden omkring dig, uden at tage hovedtelefonerne af, forstærker Smart Ambient lyden fra omgivelserne.
​Til langvarig lytning: Få op til 50 timers trådløs afspilning, og genoplad batteriet på kun 2 timer med det praktiske USB-C-kabel. Og hvis du har travlt, giver 5 minutters lynopladning dig 4 timers ekstra musik. (*Batteritid: BT tændt/ANC slukket)
Tag hovedtelefonerne af, og musikken stopper. Sæt dem på igen, og musikken begynder igen. Det kunne virkelig ikke være enklere.
Alexa eller Hey Google er altid klar. Aktiver din enheds stemmeassistent ved blot at bruge deres aktiveringsord eller trykke på ørekapslen.
Skift nemt fra én Bluetooth®-enhed til en anden. Spring fra en video på din tablet til et opkald på din mobiltelefon, og gå aldrig glip af et øjeblik.
Uanset om du bruger en Android- eller Windows-enhed, er det nemt at konfigurere dine hovedtelefoner til automatisk at parre med den, når den er i nærheden. Og hvis hovedtelefonerne bliver væk, har du med den nye Google Finder-tjeneste et netværk med over 3 millioner Android-brugere, der automatisk hjælper dig med at finde dem.
Dine venner, familie og kolleger vil høre hvert ord, du siger — også når du er udenfor, og det blæser.
De bløde ørepuder og stof-hovedbøjlen i jordfarver gør disse hovedtelefoner komfortable og unikke. Og når du tager dem af, opbevares de i et blødt og beskyttende etui, der er nemt at tage op af din taske.
Styr dit livs soundtrack. Den gratis JBL Headphones-app giver dig mulighed for at skræddersy dine hovedtelefoners indstillinger. Du kan fx tilpasse ANC og hovedtelefonernes funktion eller hurtigt opsætte utroligt realistisk lyd til dine film, din musik og dine spil.
My JBL Headphones-appen tilpasser lydoplevelsen til dig. Tag blot den hurtige og nemme høretest, og der oprettes automatisk en tilpasset lydprofil, der er klar til brug, hver gang du tager hovedbøjlen på. Det er det hele.

FAQs & How-Tos

13 results
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

    Switching between voice assistant #1.png

    You can change the default assistant in the ‘My JBL Headphones’ app:
    1. Open the My JBL Headphones app on your device.
    2. Select the headphones you are connected too.
    3. Go to Settings by clicking the symbol in the top right corner.
    4. Select Voice Assistant.
    5. Now you can select your preferred voice assistant.
    Switching between voice assistant #2.png

    Your headphones may restart after switching Voice Assistant.
  • After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
      Trigger Alexa #2 FAQ.png

    Things to try
    • “What’s the weather?”
    • Play Niall Horan
    • Play NPR on iHeartRadio
    • Set a timer for 5 minutes
    • What new skills do you have?
    Stop Alexa when she talks
    While Alexa is talking, press and release the Action button then say “Stop”.

    For more information and things to try with Alexa, visit: www.amazon.com/alexadevices
  • After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
    Trigger Google - #1 FAQ.png
    Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones

    Get your notifications
    Double-tap the Action button.

    Stop your Google Assistant
    Touch the Action button.

    Reply to the message (where available)
    After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

    For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

     
  • Personi-Fi 2.0 is a new feature available through the JBL Headphones App. This feature helps to personalize the sound using the best possible sound curve based on your hearing capabilities. It will first ask a few questions, and then check your current ambient audio. You will be informed that this step should be completed in a quiet environment. It will play a series of test tones in all the different frequencies wherein after each frequency test tone is played, it will ask you what is the lowest volume setting you can hear. Nine different sounds will be played in each ear (18 in total).

    Simply press and release the button when you hear a sound. After it goes through all the test tones, it then calculates the best sound for your ears based on the results. It allows you to demo the results by playing a track. You will be able to toggle it on/off to hear the difference.

    Personifi pics.PNG
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00