JBL Tune 660NC

JBL Tune 660NC

Trådløse on-ear-hovedtelefoner med aktiv støjreduktion.

Sold from 2021 until now

Getting started with your JBL Tune 660NC

Getting started with your JBL Tune 660NC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Enheds-størrelser (mm)
32
Number of Microphones
2
Enheds-følsomhed ved 1kHz/1mW (dB)
100
Dynamisk frekvensområde (Hz)
20Hz-20kHz
Impedans (ohm)
32
Dybde (cm)
1.7
Ear Cup Depth (in)
0.7
Højde (cm)
7.3
Ear Cup External Height (in)
2.9
Bredde (cm)
7.3
Ear Cup External Width (in)
2.9
Indre bredde (cm)
3.2
Ear Cup Internal Height (in)
1.3
Indre højde (cm)
3.2
Ear Cup Internal Width (in)
1.3
Hovedtelefonernes kabel-længde (m)
0.2
Headphone Cable Length (ft)
0.7
Vægt (g)
166
Vægt (oz)
5.9
Bluetooth-profiler
A2DP v1.3, AVRCP v1.5, HFP v1.6
Bluetooth-frekvens
2.402 GHz-2.480 GH
Bluetooth-version
5.0
Ladetid (timer fra helt afladet)
2
Maksimal spilletid med aktiv støjreduktion (timer)
44
Maksimal spilletid (timer)
44
Bluetooth
Ja
Sammenklappelig
Ja
Stemmeassistent
Ja
Aktiv støjreduktion
Ja
Indbygget mikrofon
Ja
Aftageligt kabel
Ja
Håndfri opkald
Ja
JBL Pure Bass-lyd
Ja
On-ear
Ja
Genopladeligt batteri
Ja
Fjernbetjening på ørekopper?
Ja
Trådløse
Ja

Din musik, uden støj

Tune 660NC-hovedtelefonerne med støjreduktion giver dig fantastisk lyd, helt uden støj! Nyd op til 44 timer med JBL Pure Bass-lyd. Og genoplad på et øjeblik (blot 5 minutter for at få 2 ekstra timer på batteriet). Løbet tør for strøm? Sæt bare det medfølgende aftagelige kabel til for at holde gang i musikken. Par øjeblikkeligt JBL Tune 660NC til din Android-enhed takket være Googles Fast Pair-teknologi. Brug de praktiske knapper på ørekoppen til at styre lyden og opkald, og lad bare mobilen blive i din lomme. Vælg den farve, som bedst matcher dit humør. De er superlette og kan foldes helt flade, så du kan have dem med overalt og gøre din dag endnu bedre.

Hold støjen ude, og nyd din musik.
I over 70 år har JBL skabt den præcise, imponerende lyd, man finder på de store spillesteder rundt om i verden. Disse hovedtelefoner gengiver den samme JBL-lyd med en bas, der er både dyb og kraftig.
Lyt trådløst i 44 timer med aktiv støjreduktion – underholdning, der bliver ved og ved. Eller op til 55 timer kun med Bluetooth. Få 2 timer ekstra med bare 5 minutters opladning ved hjælp af det praktiske type-C USB-kabel. Brug dem så længe du vil med det medfølgende, aftagelige kabel.
Du kan nemt styre lyden og håndtere dine opkald fra hovedtelefonerne med de praktiske knapper og mikrofonen på ørekoppen. Eller du kan bruge knappen på ørekoppen til hurtigt at aktivere din enheds stemmeassistent.
Afspil stereolyd i høj kvalitet trådløst fra din smartphone eller tablet uden besværlige ledninger, takket være Bluetooth 5.0.
De lette materialer er komfortable at have på ørerne. Og den robuste konstruktion sikrer, at du kan klappe disse hovedtelefoner perfekt sammen og ud igen i mange år.
JBL Tune 660NC parres øjeblikkeligt til din Android-enhed, så snart de tændes, takket være Googles Fast Pair-teknologi.

FAQs & How-Tos

5 results
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • 1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

    2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

    3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

    4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

    5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

    6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

    You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
  • If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00