JBL Live 220BT
Lev for fuld styrke.
Sold from 2019 until now
Getting started with your JBL Live 220BT
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowQuick Start Guide & Downloads
Product Specifications
- Enheds-størrelser (mm)
- 8
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 104
- Dynamisk frekvensområde (Hz)
- 20Hz - 20kHz
- Impedans (ohm)
- 31
- Antal dynamiske enheder pr. øre
- 1
- Vægt (g)
- 1.1
- Bluetooth-version
- 4.2
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 10
- Bluetooth
- Ja
- Charging cable
- Ja
- Stemmeassistent
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Håndfri opkald
- Ja
- Flerpunktsforbindelse
- Ja
- Genopladeligt batteri
- Ja
- Multifunktionel TalkThru-knap
- Ja
- Ægte trådløse
- Ja
- Trådløse
- Ja
Trådløse øretelefoner med nakkebånd
Få det bedste ud af hvert øjeblik, og hold kontakten til din omverden med JBL LIVE 220BT. Med den berømte JBL-lyd og trådløs forbindelse med nem adgang til Google Assistent eller Amazon Alexa kan JBL LIVE 220BT uden problemer integreres med alle dele af din verden. Det er nemt at afspille din yndlingsplayliste eller sende en besked til en ven uden at skulle kigge på telefonen. Og hvis du stadig vil høre, hvad der sker omkring dig, eller tale med dine venner, mens du har hovedtelefonerne på, skal du bare aktivere Ambient Aware- og TalkThru-teknologierne. Hvis batteriet er fladt efter 10 timers arbejde, kan du genoplade JBL LIVE 220BT i blot 15 minutter for at få en ekstra time. Det fleksible nakkebånd sidder komfortabelt om nakken og giver dig mulighed for at folde hovedtelefonerne, så du nemt kan have dem i lommen, når du ikke bruger dem. JBL LIVE 220BT-hovedtelefonerne er udført i førsteklasses materialer og i et stort udvalg af farver. Fjernbetjeningen med 4 knapper og mikrofon understøtter den håndfri forbindelse. Flerpunktsforbindelsen skifter let mellem video og opkald fra to forskellige enheder, så du kan styre dine opkald uden gå glip af noget. Når du ikke bruger hovedtelefonerne, kan du nemt have dem om halsen, takket være de magnetiske ørestykker.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes, there are two ways to disable the voice assistant feature.
1) double tap the left ear cup, or 2) In the My JBL Headphones app, de-select both assistants.Was this helpful? Thank you for your feedback! -
Yes, both voice assistants are supported by the JBL LIVE headphones.
Amazon Alexa or Google Assistant must be selected as the default voice assistant through the My JBL Headphones app.
The two voice assistants cannot be used simultaneously. You can always change your default voice assistant through the My JBL Headphones app.Was this helpful? Thank you for your feedback! -
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
To pair the JBL LIVE headphones the first time, switch the headphone on, look for the blinking blue light indicating pairing mode. Switch on Bluetooth on your source device, find the JBL LIVE headphones in Settings > Bluetooth and confirm pairing. To pair the JBL LIVE headphones from the second time onwards, or to link them with a different device, press and hold the power button until the blue flashing light is visible.Was this helpful? Thank you for your feedback!
-
With the headphones switched ON, press and hold both volume buttons for more than 5 seconds.
Your headphones are now reset to factory status.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
