JBL Tour Pro+ TWS

JBL Tour Pro+ TWS

Totalt trådløse øretelefoner med støjreduktion

Getting started with your JBL Tour Pro+ TWS

Getting started with your JBL Tour Pro+ TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Weight (g)
15
Enheds-størrelser (mm)
6.8
Enheds-følsomhed ved 1kHz/1mW (dB)
100
Dynamisk frekvensområde (Hz)
10Hz - 20kHz
Impedans (ohm)
16
Antal dynamiske enheder pr. øre
1
Charging Case Weight (oz)
2
Earpiece Weight (oz)
0.5
Vægt (g)
56.8
Vægt (g)
15
Bluetooth-version
5.0
Bluetooth-profiler
A2DP V1.3 AVRCP V1.6 HFP V1.7
Bluetooth-frekvens
2.4 GHz – 2.4835 GHz
Bluetooth sender-modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth sender-effekt
0 - 12dbm
Maksimal spilletid uden aktiv støjreduktion (timer)
8
Maksimal spilletid med aktiv støjreduktion (timer)
6
Maksimal spilletid (timer)
8
Fjernbetjening på ørekopper?
Ja
IPX-rating
IPX5
Charging cable
Ja
Stemmeassistent
Ja
Lader lyd fra omgivelserne passere
Ja
Indbygget mikrofon
Ja
Håndfri opkald
Ja
Ægte trådløse
Ja
Adaptiv støjreduktion
Ja
Trådløse
Ja
Smart opladningsetui
Ja
Lynopladning (5 min. = 1 t spilletid)
Ja
Genopladeligt batteri
Ja
Bluetooth
Ja

Styr dine omgivelser. Styr din produktivitet.

Tag kontrol over din dag med JBL Tour Pro+ TWS, som leverer JBL pro Sound. Du får hele 32 timers spilletid fra det trådløst genopladelige batteri og en app til ultimativ tilpasning. Disse elegante øretelefoner holder dig inspireret og engageret med adaptiv støjreduktion og Smart Ambient-teknologi, som kontrollerer lydene omkring dig. Så snart du åbner etuiet, nyder du godt af smarte funktioner, der er skabt til at øge din produktivitet og give dig enestående komfort. Tre mikrofoner sikrer opkald af høj kvalitet selv i støjende eller blæsende miljøer. Så er du klar til at fordybe dig i arbejdet - eller slå dig løs overalt, hvor dine eventyr bringer dig hen.

JBL's adaptive støjreduktion bruger interne og eksterne mikrofoner til at minimere forstyrrelser. Samtidig kan du nyde maksimal lydkvalitet som soundtrack til dit liv. Med Smart Ambient-teknologi kan du fastholde opmærksomheden på omgivelserne eller høre venner og kolleger tydeligt med et tryk på en knap eller i JBL-appen.
Fra fyldig og kraftfuld bas til medrivende detaljer i diskanten. Du får altid den ultimative lydoplevelse med JBL Tour Pro+ TWS med dynamiske enheder på 6,8 mm og JBL pro Sound.
Hold forbindelsen dagen lang med op til 32 timers batteritid, Qi-kompatibel trådløs opladning og tre opladninger i etuiet. Og skulle du alligevel løbe tør for strøm, kan du lynoplade dig til en times spilletid på få minutter.
Støjende omgivelser? Intet problem! JBL Tour Pro+ TWS sikrer perfekt og klar stemmegengivelse under opkald med to udvendige retningsbestemte mikrofoner og en tredje mikrofon, der reducerer vindstøj og andre forstyrrelser.
Skab det perfekte lydunivers, hvor du kan fokusere fuldt ud på dine opgaver. Har du brug for stilhed? SilentNow leverer varen. Autosluk-funktionen slukker dine hovedtelefoner efter en periode, du selv vælger. Vågn op til My Alarm, finjuster din lyd med Smart Audio & Video, og nyd hvordan øretelefonerne automatisk sættes på pause, når du tager dem af. Alle disse funktioner styres med My JBL Headphones-appen.
Så snart du åbner etuiet, starter Bluetooth-synkroniseringen med dobbelt tilslutning, som giver en ultrastabil forbindelse. Hvert ørestykke forbindes uafhængigt, så du kan tildele funktioner til venstre eller højre øre og besvare opkald med et eller begge ørestykker.
Hold forbindelsen til din digitale verden, uanset hvor du er. Aktivér din foretrukne stemmeassistent blot ved at bruge din stemme. Du kan endda tale med Hey Google for at styre dine hovedtelefoner. Stemmebeskeder er tilgængelige på flere sprog. (*) Understøttes kun på Android. (**) Android 6.0 eller højere er påkrævet for fuld adgang til Alexa-funktioner, når denne enhed bruges.
Gør soundtracket til dit liv personligt med My JBL Headphones-appen. Hent den gratis app for at opsætte brugerdefineret EQ, slå adaptiv støjreduktion til eller justere dine indstillinger for kontrol af omgivende lyd.

FAQs & How-Tos

19 results
  • Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • JBL TOUR ONE
    Power off Tour One first and hold the ambient aware button on the left earcup for 2 seconds. You can get ANC on without Bluetooth connection, which will save your battery. Once you slide up the button on the right ear cup to power on, Bluetooth connection and music will return to normal.


      Manually activating Silent NOW #1.png

    JBL TOUR PRO+ TWS
    Press and hold both right and left earbuds on Tour Pro+ TWS for 5 seconds at the same time. You can get ANC on without Bluetooth connection, which will save your battery. Once you press and hold both right and left earbuds for 5 seconds, Bluetooth connection and music will return to normal.

      Manually activating Silent NOW.png
  • To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
    * Location
    Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
    Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
    Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
  • The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

    Switching between voice assistant #1.png

    You can change the default assistant in the ‘My JBL Headphones’ app:
    1. Open the My JBL Headphones app on your device.
    2. Select the headphones you are connected too.
    3. Go to Settings by clicking the symbol in the top right corner.
    4. Select Voice Assistant.
    5. Now you can select your preferred voice assistant.
    Switching between voice assistant #2.png

    Your headphones may restart after switching Voice Assistant.
  • 1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
  • After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
      Trigger Alexa #2 FAQ.png

    Things to try
    • “What’s the weather?”
    • Play Niall Horan
    • Play NPR on iHeartRadio
    • Set a timer for 5 minutes
    • What new skills do you have?
    Stop Alexa when she talks
    While Alexa is talking, press and release the Action button then say “Stop”.

    For more information and things to try with Alexa, visit: www.amazon.com/alexadevices
  • After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
    Trigger Google - #1 FAQ.png
    Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones

    Get your notifications
    Double-tap the Action button.

    Stop your Google Assistant
    Touch the Action button.

    Reply to the message (where available)
    After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

    For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

     
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00