JBL Go 2

JBL Go 2

Bærbar Bluetooth-høyttaler

Sold from 2018 until now

Predecessor Product: JBL Go
Successor Product: JBL Go 3

Getting started with your JBL Go 2

Getting started with your JBL Go 2

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Output power (W)
3
Dynamic frequency response range (Hz)
180Hz – 20kHz
Dimensions (cm)
8.6 x 7.1 x 3.2
Dimensions (in)
3.4 x 2.8 x 1.3
Weight (kgs)
0.18
Weight (lbs)
0.39
Bluetooth profiles
A2DP V1.2, AVRCP V1.5 HFP V1.5, HSP V1.2
Bluetooth frequency
2.402-2.480GHz
Bluetooth transmitted modulation
GFSK/DQPSK/8DPSK
Bluetooth version
4.1
Charging time (hrs)
2.5
Maximum music playing time (hrs)
5
3.5 mm audio cable Input
Ja
Bluetooth
Ja
Charging cable
Ja
Waterproof
Ja
Wireless
Ja
Rechargable battery
Ja
Speakerphone
Ja

Grab and go.

JBL GO 2 er en funksjonsrik, vanntett Bluetooth-høyttaler som du kan ta med deg overalt. Strøm musikk trådløst via Bluetooth for opptil fem timers kontinuerlig lyd i JBL-kvalitet. GO 2 skaper bølger med den nye, vanntette utformingen i kategori IPX7 – nå kan musikkelskere ta med seg høyttaleren til svømmebassenget eller stranden. I tillegg leverer GO 2 krystallklare telefonsamtaler med den innebygde støydempende høyttalertelefonen. GO 2 er kompakt og leveres i 12 iøynefallende farger – den kan gjøre deg flere hakk stiligere på et blunk.

Strøm trådløst musikk med høy kvalitet fra smarttelefon eller nettbrett.
Innebygd oppladbart Li-ion-batteri gir opptil fem timers avspillingstid.
Huset er vanntett i kategori IPX7, så GO 2 er perfekt for bekymringsfri musikk på stranden eller ved bassenget – eller til og med i vannet.
Nyt krystallklare telefonkonferanser via høyttaleren med den støydempende høyttalertelefonen.
Hvis det ikke finnes Bluetooth tilgjengelig, kan du bare plugge lydkabelen inn i høyttaleren og høre på musikken på den måten.

FAQs & How-Tos

6 results
  • If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.
  • First, remove the speaker from your source device's Bluetooth settings.
    Power on the speaker, then press and hold the Volume + button and Bluetooth button together for 3-5 seconds until the speaker turns off.
    Once turned off, the speaker has been reset to the factory default settings.
  • Press the power button located on the far Left top of the speaker. If this is your first time pairing the device, the speaker will automatically go into pairing mode. Make sure that the product you are attempting to pair to is in search mode and in bluetooth range. The Go 2 should pop up on discoverable devices. Choose the Go 2 option and you will be connected within a few seconds.
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • To skip tracks forward, double click the PAUSE/PLAY to advance to the next track. Please note: You can only skip tracks forward. This speaker does not have the capability to skip to the previous track.
  • This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00