Trådløse on-ear-hodetelefoner for barn

Getting started with your JBL JR300BT

Getting started with your JBL JR300BT

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
Dynamic frequency response range (Hz)
20 Hz - 20 kHz
Impedance (ohms)
Number of drivers per ear
Weight (g)
Weight (oz)
Bluetooth version
Bluetooth profiles
HFP v1.5, HSP v1.2, A2DP v1.2, AVRCP v1.5
Bluetooth frequency
Bluetooth transmitted modulation
Charging time (hours from empty)
Maximum music play time with ANC off (hours)
Maksimum spilletid (timer)
Sound limiting filter
Remote control on ear cups?
Speed charge
Rechargable battery

Unge rockere forenes.

JBL JR300BT trødløse hodelefoner er sikre, lette og i barnestørrelse, og gir inntil 12 timer med legendarisk JBL-lyd og moro til de minste musikkelskerne. Hodetelefonene er utformet for å sikre at lydstyrken alltid er under 85dB for å beskytte hørselen, og med enkle kontroller som kan reguleres uten noen hjelp. Barna kan lytte til musikk med stor komfort, takket være det spesialutformede myke hodebåndet, og med øreputer med en fjærlett passform Barna vil også sette pris på muligheten til å dekorere hodetelefonene med de medfølgende klistremerkene.

Legendarisk lyd fra JBL som er utformet til å alltid holde lydstyrken under 85dB, noe som gjør dem sikre for selv de minste musikkelskerne.
Barne vil sette pris på en trådløs tilkobling på inntil 15 meter, og enkle kontroller som gjør de klarer seg uten hjelp fra de voksne.
Spesialutformede øreputer og hodebånd i tøffe farger.
12 timers batteritid og rask oppladning (få 1 timers batteritid med 10 minutters oppladning)
Barnevennlige kontrollknapper gjør det enkelt og trygt for barna å styre alt selv.
Mykt hodebånd og øreputer for en fjærlett passform.
Kompakt, sammenleggbar design for å gjøre det så enkelt som mulig å bære med seg musikken.
Barna kan dekorere hodetelefonene som de vil, med klistremerkesettet i esken.

FAQs & How-Tos

6 results
  • These headphones consist of plastics, synthetic leathers and foams. All JBL Jr products were put through extensive tests and are compliant with Standard Consumer Safety Specification for Toy Safety.
  • Press the power button located on the bottom of the Right Ear cup. If this is your first time using the headphones, it should immediately start looking for a device to connect to. Make sure that the device that you are trying to connect to is in pairing mode. The JBL JR300BT should display on your discoverable devices within 2-5 seconds. If the headphones have not successfully connected to the device, press and hold the Bluetooth button located next to the Power button on the Right Ear Cup for 2 seconds. As the headphones go into pairing mode, they should connect to your device within 2-5 seconds.
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Yes. This headphone has a built in microphone. To answer a call, press the power button which is located on the Left Ear Cup for 1 second. If you wish to hang up the call, press and hold the power button for 2 seconds.
  • Press and hold the power button located on the RIGHT ear cup. Make sure that the device is on and in Bluetooth range. If this is the first time connecting the device, it will automatically go into pairing mode. You will notice the LED light alternate between blue and white as it searches for a device to connect to. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect.
  • To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00


WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00