JBL Live Flex 3

JBL Live Flex 3

Helt trådløse ørepropper med støydemping, åpen design og Smart Charging Case™

Getting started with your JBL Live Flex 3

Getting started with your JBL Live Flex 3

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Quick Start Guide & Downloads

Product Specifications

Størrelse på driver
12 mm dynamisk driver
Strømforsyning
5 V 1 A
Maksimal driftstemperatur
45 °C
Frekvensrespons
20–40 kHz
Impedans
13 ohm
Følsomhet
100 dB SPL ved 1 kHz
Maksimalt SPL
95 dB
Ørepropp
4,5 g per enhet (9,0 g kombinert)
Ladeetui
63,7 g
Mikrofonens følsomhet
-38 dBV/Pa ved 1 kHz
Bluetooth-versjon (ørepropp)
5.3
Bluetooth-versjon (ladeetui)
5.1
Versjon av Bluetooth-profil
HFP
Frekvensområde for Bluetooth-sender
2,4 GHz til 2,4835 GHz
Bluetooth-senderens effekt (ørepropp)
< 9 dBm (EIRP)
Bluetooth-senderens effekt (ladeetui)
< 10 dBm (EIRP)
Modulasjon av Bluetooth-sender (ørepropp)
GFSK, π/4-DQPSK, 8-DPSK
Modulasjon av Bluetooth-sender (ladeetui)
GFSK
Type batteri for ørepropp
Litium-ion-batteri (50 mAh / 3,85 V)
Ladeetuiets batteritype
Litium-ion-batteri (690 mAh / 3,85 V)
Ladetid
2 timer fra tomt batteri
Musikkavspilling med BT på og ANC av
Opptil 10 timer
Musikkavspilling med BT på og ANC på
Opptil 7 timer
Musikkavspilling med BT på og True Adaptive ANC på
Opptil 6,5 timer
Taletid med ANC av
Opptil 5 timer

Få dagen til å låte fantastisk

Få lyd som passer for deg, uten å se på telefonen. Bruk tastene på Smart Charging Case™ for JBL Live Beam 3 helt trådløse ørepropper med støydemping, åpen design og Hi-Res Audio for å tilpasse alle funksjonene uten å åpne JBL-appen på enheten. Juster volum og EQ, kontroller musikken, ta telefonsamtaler, se meldinger og gjør skjermspareren personlig med bildene du liker best. Alt det får du, før du engang får nyte stor og kraftfull JBL Signature Sound fra selve Live Flex 3. Klassens beste støydemping holder distraksjoner ute. JBL Spatial Sound gjør at du lever deg helt inn i filmer og musikk. Og må du ta en telefon, stiller vi med 6 mikrofoner for perfekt lydkvalitet, selv i omgivelser med veldig mye bakgrunnsstøy. Alt dette, pluss en 50-timers lading: 10 timer i proppene* og ytterligere 40 i etuiet – og de kan lade trådløst. Ladeetuiet har en løkke til festesnor for enda mer praktisk bruk. God lyd har aldri vært enklere. (* med ANC av)

JBL Live Flex 3s 12 mm dynamiske drivere er perfekt innstilt for å levere dyp bass, balansert mellomtone og raffinerte høye frekvenser – alt på alle volumnivåer. JBL Spatial Sound gjør at du føler at du er på en konsert, siden lyden kommer fra nesten overalt rundt deg. Dette er JBL Signature Sound på sitt beste.
Du justerer selv på alle deler av JBL Live Beam 3-øreproppene via berøringsskjermen (1,45 tommer) på Smart Charging Case™. Skjermen gir deg stålkontroll over lyden på alle enheter, bærbare PC-er, TV-er, smarttelefoner eller nettbrett, uten at du trenger tilgang til JBL-appen på smarttelefonen.
Hold verden på avstand, helt eller delvis. Juster selv hvor mye bakgrunnslyd du vil slippe inn med fire følsomme mikrofoner som automatisk justerer seg etter omgivelsene i sanntid. Appens filter for kompensasjon av lyd i JBL Headphones har funksjoner for å tilpasse og finjustere nivået av Adaptive Noise Cancelling etter øregangens unike form.
Nyt 10 timers spilletid, pluss 40 ekstra fra ladeetuiet.* Vil du lade enda raskere? 10 minutter på en USB type-C-ladekabel gir deg fire timers ekstra spilletid. Du kan også lade dem opp trådløst. (* med ANC av)
Seks mikrofoner registrerer lydsignaler og demper vind og bakgrunnsstøy, så det du sier alltid høres klart og tydelig. En equalizer for vokal og optimalisert stemmevolum gir deg full kontroll over hvordan andre hører deg, og hvor høyt de høres ut for deg.
Gå enkelt over fra en Bluetooth-enhet til en annen, så selv om du ser en video på nettbrettet, går du likevel ikke glipp av en samtale på telefonen.
Har du Google Finder, vil et nettverk av over 3 millioner Android-enheter automatisk hjelpe deg med å finne øreproppene om du noen gang mister dem. Har du Google Audio Switch bytter du øreproppene sømløst fra én Android Bluetooth®-enhet til en annen. Hopp fra en video på nettbrettet til en samtale på mobiltelefonen, og gå aldri glipp av et øyeblikk.
JBL Live Flex 3-øreproppene er vanntette og støvtette for alle dine friluftseventyr, fra stranden til sykkelstien.
Tilpass lydsporet til livet ditt. Bare last ned appen for JBL-hodetelefoner, uten at det koster deg ekstra, for å justere hvordan du lytter. Juster adaptiv støydemping til ørenes form, lag en spilleliste for å hjelpe deg med å slappe av, sjekk den beste passformen eller finn øreproppene. Du velger også selv hvilken taleassistent du vil ha, bytter på hvordan øreproppene oppfører seg når du har lagt inn personlige fakter og justerer lydutgangen for lyd eller video for å få mest mulig ut av innholdet og mye mer.
Lev deg helt inn i alle tonene fra spillelisten. Form lyden etter din personlige profil med interaktive verktøy som henter ut nøyaktig informasjon om deg og dine egne preferanser for at du skal få det lydbildet som passer best for deg.

FAQs &amp; How-Tos

6 results
  • As with all in-ear headphones, our range of True Wireless Stereo headphones can be susceptible to a build up of dust and earwax. This can cause low volume on one or both earbuds, or balance issues (e.g. right earbud is louder than the left earbud). To reduce the likelihood of these issues occurring, it is a good idea to periodically clean your earbuds. Clean the earbuds by removing dust and wax after each use, using a pointed toothpick to remove larger amounts and a small amount of rubbing alcohol applied to a cotton swab for final degreasing. Remember to clean the charging points on the headphones and inside the charging case.

    If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output. To resolve the issue try dipping the affected earbud tip into a solution of lukewarm tap water and a small amount of dish soap (washing up liquid). The earbud tip should only be put into the liquid up to a maximum depth of 1-2 mm only (see images below). Immersing the earbuds in water or putting the earbuds in water at a larger depth than this could void your warranty. Keep the earbud tip in the water for about 2-3 minutes, then wipe/clean the grille with a small brush (such as a toothbrush). This should remove the wax and resolve the volume/balance issues.

    cleaning-earstick-tip 
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • The JBL product is in a deep sleep mode, which it is to prolong the lifetime of the battery. Connect the case to a charger for about 2 seconds to wake the product up and take the earbuds out from the case. Once you put the earbuds back in the case, it's ready to pair through Bluetooth. 

  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • PSAP (Personal Sound Amplification) is a new feature accessible within the JBL Headphones App. When this feature is turned on, it works similar to Ambient Aware, but it focuses on picking up vocal frequencies in front of you. 

     

    1. GAIN: The Personal Sound Amplification function is designed to amplify sound in the vocal range, it can assist users with (limited) hearing loss to maintain conversations more easily, especially in noisy environments. It should then amplify the speech of the person sitting across from you, not the general ambient sound as with Ambient Aware. The algorithm uses beamforming to pick out the voice from the other sounds, much like what happens during a phone call, but instead of focusing on your own voice it focuses on the voice further away from you. The gain setting allows you to amplify those vocal frequencies.

     

    2. BALANCE: The balance setting adjusts the amplification effect between your left and right ears using the slider. When set to 0 (in the middle), both ears will receive the same amplification, but depending on the user’s personal needs/preferences, they can focus the amplification more towards either the left or right ear. 

     

    PSAP pics.PNG
  • This headphone is supported by the My JBL Headphones App.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00