JBL Live 660NC

JBL Live 660NC

Trådløse øredekkende hodetelefoner med støreduksjon (NC)

Sold from 2020 until now

Getting started with your JBL Live 660NC

Getting started with your JBL Live 660NC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
40
Number of Microphones
2
Driver sensitivity at 1kHz/1mW (dB)
97 dB SPL@1 kHz/1 mW
Dynamic frequency response range (Hz)
16 Hz – 20 kHz
Impedance (ohms)
32
Dybde (cm)
2.1
Ear Cup Depth (in)
0.8
Høyde (cm)
9.3
Ear Cup External Height (in)
3.7
Bredde (cm)
7.6
Ear Cup External Width (in)
3
Indre bredde (cm)
6.4
Ear Cup Internal Height (in)
2.5
Indre høyde (cm)
4.7
Ear Cup Internal Width (in)
1.9
Hodetelefonens kabellengde (m)
0.2
Headphone Cable Length (ft)
0.7
Weight (g)
265
Bluetooth profiles
HFP V1.7, A2DP V1.3, AVRCP V1.6
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4 DQPSK, 8DPSK
Bluetooth version
5.0
Charging time (hours from empty)
2
Maximum music play time with ANC off (hours)
50
Maximum music play time with ANC on (hours)
40
Maksimum spilletid (timer)
50
Bluetooth
Ja
Charging cable
Ja
Voice Assistant integration
Ja
Adaptive Noise Cancelling
Ja
Ambient Aware
Ja
Built-in Microphone
Ja
Carrying pouch
Ja
Fabric headband
Ja
Hands Free Call
Ja
JBL Signature Sound
Ja
Multi-Point Connection
Ja
Over-øret
Ja
Rechargable battery
Ja
Remote control on ear cups?
Ja
Speed charge
Ja
TalkThru
Ja
Wireless
Ja

Trykk Play og demp distraksjoner.

Musikk er viktig i verdenen din, så ta på deg et par JBL Live 660NC-hodetelefoner og få opp humøret. Hodetelefonene JBL Live 660NC imponerer med kraftige 40 mm drivere og JBL Signature Sound med forbedret bass som fremhever hvert eneste spor. Og når musikken er det eneste som teller, gjør den adaptive støyreduserende teknologien det mulig å stenge-ut lyder fra omgivelsene, så ingenting forstyrrer flyten din. Ambient Aware beskytter deg når du er ute og går med musikken på, og TalkThru lar deg slå av en prat uten å måtte ta av din JBL Live 660NC. Trenger du hjelp til å komme deg gjennom dagen? Aktiver favoritt-stemmeassistenten din med stemmen, eller ved å berøre øreklokken. Og når du konfigurerer Hey Google, kan du aktivere JBL Live 660NC-funksjoner med bare stemmen. Magisk! Lett og behagelig takket være det myke polstrede hodebåndet. Du vil kunne nyte opptil 50 timer med musikkstrømming med ANC av, perfekte stereoanrop og en praktisk avtakbar lydkabel som lar deg rocke videre selv når batteriet går tomt. Live 660NC setter avspillingen automatisk på pause når den ikke er i bruk, og fortsetter å spille når du tar den frem igjen. Rock i vei uforstyrret med JBL Live 660 NC-hodetelefoner. (*) Kun støttet på Android. (**) Android 6.0 eller nyere kreves for full tilgang til Alexa-funksjoner når du bruker denne enheten.

40 mm drivere og en lydsignatur som benyttes hos de mest kjente arenaene over hele verden.
Hold støyen ute og fokuser på musikken med adaptiv støydemping. Med Ambient Aware-teknologien kan du spasere trygt og årvåkent på travle gater ved å skru opp lyder fra omgivelsene. TalkThru demper musikken og skrur opp talemikrofonen så du enkelt kan slå av en prat med hodetelefonene på.
Aktiver din foretrukne stemmeassistent ved hjelp av stemmen din eller ved å berøre øreklokken. Med Hey Google kan du enkelt bruke stemmen din til å aktivere ANC eller Ambient Aware, sjekke batteriet eller slå av JBL Live 660NC-enheten. Bruk den helt nye JBL-appen for enkelt å angi dine foretrukne stemmeassistenter. (*) Kun støttet på Android. (**) Android 6.0 eller nyere kreves for full tilgang til Alexa-funksjoner når du bruker denne enheten.
Håndter samtaler og hold kontakten med omverden – alt via knappene på øreklokken. Mikrofonteknologien garanterer perfekte stereoanrop.
Stå på i opptil 50 timer (eller opptil 40 timer med ANC og BT på)! Deretter kan du raskt lade opp i 10 minutter for å få 4 timer til med moro. Hodetelefoner bør tilpasse seg etter deg, ikke omvendt. JBL Live 660NC-hodetelefonenes lyd og funksjoner er enkle å tilpasse via gratisapplikasjonen My JBL Headphones: Endre EQ-innstillinger, velg din foretrukne stemmeassistent, konfigurer Smart Ambient-innstillinger og mye mer på gratisapplikasjonen.
Live 660NC er superkomfortable med et tilpasset hodebånd i tekstil og myke øreputer. En myk veske til oppbevaring og beskyttelse når du er på tur.
Musikken settes automatisk på pause når du tar hodetelefonene av deg, og fortsetter å spille av når du tar dem på deg igjen. Du trenger ikke engang tenke på det.
Du kan enkelt bytte fra én Bluetooth®-enhet til en annen. Du kan enkelt bytte fra en video på nettbrettet til et anrop på mobilen, så du aldri går glipp av anrop.
JBL Live 660NC kobler umiddelbart opp med Android-enheten din, takket være Fast Pair fra Google. Du kan også pare flere enheter ved å trykke på enhetens skjerm.
Hodetelefoner bør tilpasse seg etter deg, ikke omvendt. JBL Live 660NC-hodetelefonenes lyd og funksjoner er enkle å tilpasse via gratisapplikasjonen My JBL Headphones: Endre EQ-innstillinger, velg din foretrukne stemmeassistent, konfigurer Smart Ambient-innstillinger og mye mer på gratisapplikasjonen

FAQs & How-Tos

12 results
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

    Switching between voice assistant #1.png

    You can change the default assistant in the ‘My JBL Headphones’ app:
    1. Open the My JBL Headphones app on your device.
    2. Select the headphones you are connected too.
    3. Go to Settings by clicking the symbol in the top right corner.
    4. Select Voice Assistant.
    5. Now you can select your preferred voice assistant.
    Switching between voice assistant #2.png

    Your headphones may restart after switching Voice Assistant.
  • After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
      Trigger Alexa #2 FAQ.png

    Things to try
    • “What’s the weather?”
    • Play Niall Horan
    • Play NPR on iHeartRadio
    • Set a timer for 5 minutes
    • What new skills do you have?
    Stop Alexa when she talks
    While Alexa is talking, press and release the Action button then say “Stop”.

    For more information and things to try with Alexa, visit: www.amazon.com/alexadevices
  • After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
    Trigger Google - #1 FAQ.png
    Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones

    Get your notifications
    Double-tap the Action button.

    Stop your Google Assistant
    Touch the Action button.

    Reply to the message (where available)
    After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

    For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

     
  • This headphone is supported by the My JBL Headphones App.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00