JBL Live 460NC
Trådløse on-ear NC-hodetelefoner
Getting started with your JBL Live 460NC
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 40
- Number of Microphones
- 2
- Driver sensitivity at 1kHz/1mW (dB)
- 96
- Dynamic frequency response range (Hz)
- 20Hz – 20kHz
- Impedance (ohms)
- 32
- Dybde (cm)
- 1.5
- Ear Cup Depth (in)
- 0.6
- Høyde (cm)
- 6.7
- Ear Cup External Height (in)
- 2.6
- Bredde (cm)
- 6.7
- Ear Cup External Width (in)
- 2.6
- Indre bredde (cm)
- 3.5
- Ear Cup Internal Height (in)
- 1.4
- Indre høyde (cm)
- 3.5
- Ear Cup Internal Width (in)
- 1.4
- Hodetelefonens kabellengde (m)
- 0.2
- Headphone Cable Length (ft)
- 0.7
- Weight (g)
- 210
- Weight (oz)
- 7.4
- Bluetooth profiles
- HFP V1.7, A2DP V1.3, AVRCP V1.6
- Bluetooth frequency
- 2.402GHz – 2.48GHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth version
- 5.0
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 50
- Maximum music play time with ANC on (hours)
- 40
- Maksimum spilletid (timer)
- 50
- Audio cable
- Ja
- Bluetooth
- Ja
- Charging cable
- Ja
- Voice Assistant integration
- Ja
- Adaptive Noise Cancelling
- Ja
- Ambient Aware
- Ja
- Built-in Microphone
- Ja
- Detachable Cable
- Ja
- Fabric headband
- Ja
- Hands Free Call
- Ja
- JBL Signature Sound
- Ja
- Multi-Point Connection
- Ja
- On-ear
- Ja
- Over-øret
- Nei
- Rechargable battery
- Ja
- Speed charge
- Ja
- TalkThru
- Ja
- Wireless
- Ja
Trykk Play, demp forstyrrelser.
Overlegen lyd er viktig i verdenen din, det samme gjelder uforstyrret fokus. Så ta på deg et par JBL Live 460NC-hodetelefoner og få begge deler. Hodetelefonene JBL Live 460NC er utstyrt med massive 40 mm drivere, JBL Signature Sound og forbedret bass som fremhever alle sporene på spillelisten. Aktiver adaptiv støydemping når du trenger å fokusere, eller Smart Ambient når du vil være i kontakt med omverdenen. Trenger du hjelp til å komme deg gjennom dagen? Aktiver favoritt-stemmeassistenten din ved hjelp av stemmen eller ved å berøre øreklokken. Og når du konfigurerer Hey Google, kan du aktivere JBL Live 460NC-funksjoner med bare stemmen. Magisk! Lett og behagelig takket være det myke polstrede hodebåndet, du vil kunne nyte opptil 50 timer med musikkstrømming med ANC av, perfekte stereoanrop og en praktisk avtakbar lydkabel som lar deg rocke videre selv når batteriet går tomt. Live 460NC setter avspillingen automatisk på pause når den ikke er i bruk, og fortsetter å spille når du tar den frem igjen. Rock i vei uforstyrret med JBL Live 460NC-hodetelefoner. (*) Kun støttet på Android. (**) Android 6.0 eller nyere kreves for full tilgang til Alexa-funksjoner når du bruker denne enheten.
40 mm drivere og en lydsignatur som benyttes hos de mest kjente arenaene over hele verden.
Hold støyen ute og fokuser på musikken med adaptiv støydemping. Med Ambient Aware-teknologien kan du spasere trygt og årvåkent på travle gater ved å skru opp lyder fra omgivelsene. TalkThru demper musikken og skrur opp talemikrofonen slik at du enkelt kan slå av en prat med hodetelefonene på.
Aktiver din faretrukne stemmeassistent ved hjelp av stemmen din eller ved å berøre øreklokken. Med Hey Google kan du enkelt bruke stemmen din til å aktivere ANC eller Ambient Aware, sjekke batteriet eller slå av JBL Live 460NC-enheten. Bruk den helt nye JBL-appen for enkelt å angi dine foretrukne stemmeassistenter.
(*) Kun støttet på Android. (**) Android 6.0 eller nyere kreves for full tilgang til Alexa-funksjoner når du bruker denne enheten.
Rock videre i to hele dager – og nyt den raske ladetiden hvis det ikke er nok. Live 460NC lar deg spille musikk i opptil 50 timer med ANC av, eller opptil 40 timer med ANC skrudd på – og lad opp 4 timers batteritid på bare 10 minutter! Med den avtakbare lydkabelen kan du rocke videre selv når batteriet går tomt.
Håndter samtaler og hold kontakten med omverden – alt via knappene på øreklokken. Mikrofonteknologien garanterer overlegne stereoanrop.
Du kan enkelt bytte fra én Bluetooth®-enhet til en annen. Du kan enkelt bytte fra en video på nettbrettet til et anrop på mobilen, så du aldri går glipp av anrop.
Live 460NC er superkomfortable med rundt hodet med et passende tekstilhodebånd og myke øreputer.
Musikken settes automatisk på pause når du tar hodetelefonene av deg, og fortsetter å spille av når du tar de på deg igjen. Du trenger ikke engang tenke på det.
JBL Live 460NC kobler umiddelbart opp med Android-enheten din, takket være Fast Pair fra Google. Du kan også pare flere enheter ved å trykke på enhetens skjerm.
Hodetelefoner bør tilpasse seg etter deg, ikke omvendt. JBL Live 460NC-hodetelefonenes lyd og funksjoner er enkle å tilpasse via gratisapplikasjonen MyJBL Headphones: Endre EQ-innstillinger, velg din foretrukne stemmeassistent, konfigurer Smart Ambient-innstillinger og mye mer ved å laste ned gratisapplikasjonen.
FAQs & How-Tos
12 results
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback! -
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
Things to try- “What’s the weather?”
- Play Niall Horan
- Play NPR on iHeartRadio
- Set a timer for 5 minutes
- What new skills do you have?
While Alexa is talking, press and release the Action button then say “Stop”.
For more information and things to try with Alexa, visit: www.amazon.com/alexadevicesWas this helpful? Thank you for your feedback! -
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones
Get your notifications
Double-tap the Action button.
Stop your Google Assistant
Touch the Action button.
Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.
For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones
Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
