JBL Live 220BT
Forsterket for å leve livet.
Sold from 2019 until now
Getting started with your JBL Live 220BT
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 8
- Driver sensitivity at 1kHz/1mW (dB)
- 104
- Dynamic frequency response range (Hz)
- 20Hz - 20kHz
- Impedance (ohms)
- 31
- Number of drivers per ear
- 1
- Weight (g)
- 1.1
- Bluetooth version
- 4.2
- Charging time (hours from empty)
- 2
- Maksimum spilletid (timer)
- 10
- Bluetooth
- Ja
- Charging cable
- Ja
- Voice Assistant integration
- Ja
- Ambient Aware
- Ja
- Built-in Microphone
- Ja
- Hands Free Call
- Ja
- Multi-Point Connection
- Ja
- Rechargable battery
- Ja
- TalkThru
- Ja
- True Wireless
- Ja
- Wireless
- Ja
Trådløse ørepropper med nakkebøyle
Gjør mest mulig ut av hvert eneste øyeblikk, og hold kontakten med verdenen din med stil – med JBL LIVE 220BT. JBL LIVE 220BT leverer JBL Signature Sound, trådløs tilkobling med enkel tilgang til Google Assistant eller Amazon Alexa, og muliggjør sømløs integrasjon med alle deler av verden. Nå er det enkelt å spille favorittspillelisten eller sende tekstmeldinger til en venn uten å se på telefonen. Hvis du fortsatt vil høre hva som skjer rundt deg eller snakke med vennene dine med hodetelefonene på, aktiverer du ganske enkelt teknologiene Ambient Aware og TalkThru. Hvis batteriet går flatt etter 10 timers drift, kan du lade JBL LIVE 220BT i bare 15 minutter for å få en ekstra time. Den fleksible nakkebøylen sitter komfortabelt bak nakken og lar deg folde sammen hodetelefonene slik at de lett får plass i lommen når du er ferdig. JBL LIVE 220BT-hodetelefonene er laget med førsteklasses materialer i et bredt spekter av farger, og holder deg tilkoblet håndfritt takket være den 4-knapps fjernkontrollen med mikrofon. Multipunkt tilkoblingen skifter sømløst mellom en video og en samtale fra to separate enheter, slik at du kan styre samtalene dine uten avbrudd. Når du ikke bruker dem, kan du enkelt la hodetelefonene sitte på halsen din takket være de magnetiske ørepluggene.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes, there are two ways to disable the voice assistant feature.
1) double tap the left ear cup, or 2) In the My JBL Headphones app, de-select both assistants.Was this helpful? Thank you for your feedback! -
Yes, both voice assistants are supported by the JBL LIVE headphones.
Amazon Alexa or Google Assistant must be selected as the default voice assistant through the My JBL Headphones app.
The two voice assistants cannot be used simultaneously. You can always change your default voice assistant through the My JBL Headphones app.Was this helpful? Thank you for your feedback! -
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
To pair the JBL LIVE headphones the first time, switch the headphone on, look for the blinking blue light indicating pairing mode. Switch on Bluetooth on your source device, find the JBL LIVE headphones in Settings > Bluetooth and confirm pairing. To pair the JBL LIVE headphones from the second time onwards, or to link them with a different device, press and hold the power button until the blue flashing light is visible.Was this helpful? Thank you for your feedback!
-
With the headphones switched ON, press and hold both volume buttons for more than 5 seconds.
Your headphones are now reset to factory status.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
