How To

Support Overview / How To

How To

1102 results

Sort

Page size

How to set up your microphone
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.

Check that the PC is using the correct recording device.

1. Go to Control Panel

2. Select Sound

3 Select Recording

4. Make sure to select the proper recording device.
1. Right-click on it Quantum headset.
2. Now select "Set Default Device" or "Select Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset.

6. Go to Properties

7. Chose Levels and adjust accordingly
Was this helpful? Thank you for your feedback!
How to set up your microphone
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.

Check that the PC is using the correct recording device.

1. Go to Control Panel

2. Select Sound

3 Select Recording

4. Make sure to select the proper recording device.
1. Right-click on it Quantum headset.
2. Now select "Set Default Device" or "Select Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset.

6. Go to Properties

7. Choose Levels and adjust accordingly
Was this helpful? Thank you for your feedback!
How to set up your device with Android or iOS
1. Power on your JBL LINK speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Open your Google Home app .
4. Enable Bluetooth
5. Enable Location Service (Android Only)
  1. Make sure you have permitted the Google Home app to view your location.
6. First option Tap Add Set up device Set up new devices in your home
7. Second option Tap X device found Select Home location
8. Follow the instruction on screen to add your new JBL LINK speaker.
You are now all set and can enjoy your LINK device!
Was this helpful? Thank you for your feedback!
How to set up the JBL Quantum 910 Wireless headset to my PC?

Connect the headset to your PC via the 2.4GHz USB Wireless connection and ensure that you set your Quantum 910 Wireless headset as the default device especially before enabling the JBL QuantumSPATIAL 360 if you haven't installed the QuantumENGINE yet. You can check that the default device is selected under Control Panel > Sound > Playback. Select JBL Quantum 910 Wireless Game, right-click, and select "Set as Default Device"

Was this helpful? Thank you for your feedback!
How to save your favorite music to the My Moments feature

(1) Use JBL One App to set up the My Moment Feature.
(2) Select the JBL speaker/soundbar you want to set your favorite music to the My Moment feature.
(3) Tap the My Moment card to assign music.
(4) Click Add Music to manage music streaming services and specific music tracks.
(5) Set the timer to inactive speaker/soundbar (optional)
(6) Set the music loudness (optional)
(7) Press SAVE

Was this helpful? Thank you for your feedback!
How to restore your speaker to factory default settings

If you encounter issues using the speaker with your phone or tablet, or you want to remove all previous Bluetooth pairings from the speaker, it may be necessary to 'factory reset' the speaker.

How to reset
First, remove or forget the speaker from the list of paired Bluetooth devices in the settings of the phone or tablet.
Then, with the speaker powered on, press and hold the Volume + and Play buttons simultaneously for 3 seconds until the unit turns off.
The speaker has now been restored to factory default settings.

Was this helpful? Thank you for your feedback!
How to restore Tuner 2 and XL to factory settings

The reset for the Tuner 2 and Tuner XL is as follows:
Reset to factory default - Long press Preset 1 & Bluetooth buttons for more than 10 seconds.

Was this helpful? Thank you for your feedback!
How to restore factory default settings on your speaker

If you wish to reset your speaker due to various reasons, then keep reading, and follow along. 1. Press and hold Volume+ & Play/pause buttons down at the same time for more than 5 seconds. 2. The Pulse 4 will turn off, indicating that you did a successful reset. 3. Switch your Pulse 4 on again. 4. Connect with your favorite Bluetooth device and enjoy the music! Do you still have problems? Contact our Customer Service for more help!

Was this helpful? Thank you for your feedback!
How to restore factory default settings on your device

With our JBL BAR 9.1 Surround there is two types of resets, one is to reset the WiFi settings and last one is to restore factory default settings. Let us walk through each one of them. Resetting WiFi settings Turn on your JBL BAR 9.1 Surround. Press and hold POWER button down for more than 10 seconds. All of your WiFi configuration is lost and you need to reinstall it again. Use the Google Home app to install the device on your WiFi network. Resetting to Factory default settings Turn on your JBL BAR 9.1 Surround Press and hold POWER and SOURCE button for 3 seconds. Your device is now reset. You can now start allover with installing your BAR 9.1 Surround.

Was this helpful? Thank you for your feedback!
How to restore factory default settings on your device
With our JBL BAR 5.1 Surround there is two types of resets, one is to reset the WiFi settings and last one is to restore factory default settings.

Let us walk through each one of them.

Resetting WiFi settings
1. Turn on your JBL BAR 5.1 Surround.
2. Press and hold POWER button down for more than 10 seconds.
3. All of your WiFi configuration is lost and you need to reinstall it again.
Use the Google Home app to install the device on your WiFi network.

Resetting to Factory default settings
1. Turn on your JBL BAR 5.1 Surround
2. Press and hold POWER and SOURCE button for 3 seconds.
3. Your device is now reset.
You can now start allover with installing your BAR 5.1 Surround.
Was this helpful? Thank you for your feedback!
How to restore factory default settings (factory reset) for your device
The factory reset button restores your device to the default settings, including network and audio configurations.

Please use one of the following solutions:
1. Press and hold VOL -, VOL +, and Source buttons on the device at the same time until the LED light flashes (hold for more than 5 seconds)
Or alternatively;
1. Open your JBL ONE App.
2. Navigate to the support tile.
3. Select RESTORE FACTORY SETTINGS.
Was this helpful? Thank you for your feedback!
How to restore factory default settings
To reset your JBL Bar 2.0 or 2.1 back to factory default settings, follow the steps below.
1. Turn on your JBL Bar 2.0 or 2.1
2. Press SOURCE and POWER buttons on top of the bar at the same time for more than 3 seconds.
3. Your soundbar will now power off and on again.
All Bluetooth paired devices are now removed from the internal memory; please Bluetooth pair your devices again.
Was this helpful? Thank you for your feedback!