JBL Flip 3

Predecessor Product:	JBL Flip 2
Successor Product:	JBL Flip 4

Predecessor Product:

JBL Flip 2

Successor Product:

JBL Flip 4

FAQs & How-Tos

19 results

Sort

Page size

After I updated my computer to Windows 8/10, I am no longer able to establish a Bluetooth connection with my speaker to play music. How can I correct the problem?

This is because most Windows do not support A2DP stereo audio streaming via Bluetooth, the standard for music-listening through Bluetooth. The system will support keyboards, mice, printers etc. via Bluetooth, but not audio. It is necessary to download the proper drivers, either from the computer manufacturer, the software manufacturer or the manufacturer of the Bluetooth chip in the computer. Help to do this must be sought with the companies that supply one or more of these computer features.

Was this helpful? Thank you for your feedback!
Buttons unresponsive when plugged into a power source

If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.

Was this helpful? Thank you for your feedback!
Can i connect 3 or more speakers together with JBL Connect?

No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL Connect

Was this helpful? Thank you for your feedback!
Does it have automatic standby?

Yes, after approximately 10 minutes of no activity and no audio, the unit goes into sleep mode. It must be awakened with the ON/OFF Button. It is not possible to wake it up with a Bluetooth pairing signal. After 20 minutes of no activity and no audio, the unit will power off.

Was this helpful? Thank you for your feedback!
Does my speaker have an input selector, or are Bluetooth and AUX signals playing simultaneously?

Bluetooth keeps on playing, even if you connect something and play to the AUX input. BT keeps on playing, since it has first priority. If you pause or stop BT play, any source playing to the AUX input will now be heard. If you resume play on the BT source, it will take over, and the AUX source is no longer heard, but will of course keep on playing, since there is no way to send a pause or stop signal to the AUX source via the line cable. All of this means that there is an input selector switch built into the device, controlled by the BT play function.

Was this helpful? Thank you for your feedback!
How can I check the software version on my Flip3, Flip4 or Xtreme??

By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version.

Was this helpful? Thank you for your feedback!
How do I use the unit as a microphone/speaker?

Make sure your device is paired with a mobile device. When receiving a call, press the phone button to answer the call. You can now use it as a speakerphone.

Was this helpful? Thank you for your feedback!
How to reset: Flip 2, Flip 3, Clip 2

In power ON mode press and hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds -> Unit will power Off by itself.
Now the unit is reset to factory default.

Was this helpful? Thank you for your feedback!
How to reset Bluetooth on Flip3?

With the Flip3 ON, press the Bluetooth briefly to enter pairing mode, while another BT source that is already connected plays on. Now two sources can take turns playing, just by pressing play on one, then the other. The one being overridden will enter pause mode. For complete Bluetooth reset, while the Flip3 is ON and paired, press and hold the Bluetooth button for more than 3 seconds. The Bluetooth button light goes out, and the connection is broken. Press the Bluetooth button again for new pairing.

Was this helpful? Thank you for your feedback!
If I pair my Bluetooth speaker to my phone, and record a video with the phone, will the speaker's microphone serve as audio source?

No, all recordings made on the telephone will be using the telephone's built-in microphone. Replay of the recording will be heard over the speaker afterwards, though, as long as it is paired to the telephone.

Was this helpful? Thank you for your feedback!