JBL Tune 510BT
Langattomat on-ear-kuulokkeet
Sold from 2021 until now
Getting started with your JBL Tune 510BT
Documents & Downloads
Product Specifications
- Elementin koko (mm)
- 32
- Number of Microphones
- 1
- Elementin herkkyys @ 1kHz/1mW (dB)
- 103.5
- Dynaaminen taajuusvaste (Hz)
- 20 Hz – 20 kHz
- Impedanssi (ohmia)
- 32
- Syvyys (cm)
- 1.7
- Ear Cup Depth (in)
- 0.7
- Korkeus (cm)
- 7.3
- Ear Cup External Height (in)
- 2.9
- Leveys (cm)
- 7.3
- Ear Cup External Width (in)
- 2.9
- Sisäinen Leveys (cm)
- 3.2
- Ear Cup Internal Height (in)
- 1.3
- Sisäinen korkeus (cm)
- 3.2
- Ear Cup Internal Width (in)
- 1.3
- Kuulokejohdon pituus (m)
- 0.2
- Headphone Cable Length (ft)
- 0.7
- Paino (g)
- 160
- Paino (oz)
- 5.6
- Bluetooth profiilit
- A2DP v1.3, AVRCP v1.6, HFP v1.7
- Bluetooth-taajuus
- 2.4 GHz – 2.4835 GHz
- Bluetooth-lähettimen modulaatio
- GFSK, _x001E_/4DQPSK,8DPSK
- Bluetooth-lähettimen teho
- <8 dBm
- Bluetooth-versio
- 5.0
- Latausaika (tuntia, kun akku on tyhjä)
- 2
- Maksimi toistoaika (tuntia)
- 40
- Bluetooth
- Kyllä
- Taitettava
- Kyllä
- Multi-point Connection
- Kyllä
- Remote control on ear cups
- Kyllä
- Puheääniavustaja
- Kyllä
- Sisäänrakennettu mikrofoni
- Kyllä
- Hands-free-puhelut
- Kyllä
- JBL Pure Bass -ääni
- Kyllä
- On-ear
- Kyllä
- Ladattava akku
- Kyllä
- Langattomat
- Kyllä
Jämäkkää bassoa koko päivän.
JBL Tune 510BT -kuulokkeilla voit suoratoistaa jämäkkää selkeäbassoista JBL Pure Bass -ääntä ilman johtoja. Näitä helppokäyttöisiä kuulokkeita on ilo käyttää jopa 40 tuntia – ja USB-C-latauskaapelilla akkuun saadaan ylimääräiset kaksi tuntia vain viiden minuutin latauksella. Ja jos saat puhelun katsoessasi videota jollain toisella laitteella, JBL Tune 510BT vaihtaa saumattomasti puhelimeesi. Bluetooth 5.0:lla varustetut ja mukaviksi suunnitellut JBL Tune 510BT -kuulokkeet mahdollistavat myös Siriin tai Google-palveluun yhdistämisen mobiililaitetta käyttämättä. Saatavana useissa raikkaissa väreissä ja helpot kuljettaa kokoontaitettavuutensa ansiosta – JBL Tune 510BT -kuulokkeet ovat ”nappaa mukaan ja menoksi” -ratkaisu, jolla musiikin saa yhdistettyä kiireisen elämän jokaiseen hetkeen.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+358 972 522 301
Monday - Friday: 10:00 - 18:00
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00