JBL Reflect Flow

JBL Reflect Flow

Aidosti langattomat urheilukuulokkeet.

Sold from 2019 until now

Getting started with your JBL Reflect Flow

Getting started with your JBL Reflect Flow

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Elementin koko (mm)
5.8
Number of Microphones
4
Elementin herkkyys @ 1kHz/1mW (dB)
102 dB SPL
Dynaaminen taajuusvaste (Hz)
20Hz - 20kHz
Impedanssi (ohmia)
14
Elementtien määrä per korva
1
Latauskotelon paino (g)
70
Charging Case Weight (oz)
2.5
Kuulokekapselin paino (g)
19
Earpiece Weight (oz)
0.7
Bluetooth profiilit
A2DP 1.3 AVRCP 1.5 HFP 1.6
Bluetooth-taajuus
2.402 GHz – 2.480 GHz
Bluetooth-lähettimen modulaatio
GFSK, π/4DQPSK, 8DPSK
Bluetooth-lähettimen teho
0 - 12.5dbm
Bluetooth-versio
5.0
Charging case battery life (max hours)
20
Latausaika (tuntia, kun akku on tyhjä)
2
Maksimi toistoaika (tuntia)
30
Bluetooth
Kyllä
Charging cable
Kyllä
Puheääniavustaja
Kyllä
Vedenpitävä
Kyllä
Päästää läpi ympäristön äänet
Kyllä
Sisäänrakennettu mikrofoni
Kyllä
Latauskotelo
Kyllä
Hands-free-puhelut
Kyllä
JBL Signature Sound
Kyllä
Ladattava akku
Kyllä
Kauko-ohjain korvakupeissa?
Kyllä
Pikalataus (5 min = 1 tunnin soittoaika)
Kyllä
TalkThru-monitoimipainike
Kyllä
Aidosti langaton
Kyllä
Vedenkestävät
Kyllä
Langattomat
Kyllä
IPX-luokitus
IP67
Sisäänrakennettu Google Assistant
Kyllä

Suunniteltu liikkumiseen, jonka rajat määrität sinä.

Nauti vapaudesta, jota JBL Reflect Flow -kuulokkeet tarjoavat. Harjoittelitpa sitten kuntosalilla tai liikuitpa ulkona, tukevat täysin langattomat JBL Reflect Flow -kuulokkeet aktiivisen elämäntyylisi osa-alueita. Sen lisäksi, että niiden avulla voi vaihtaa raitoja, hallita puhelinsoittoja ilman käsiä ja käyttää ääniavustajaa, ovat Reflect Flow -kuulokkeet IPX7-tason veden- ja hienkestävät, ja ne tarjoavat 10 tunnin jatkuvan toistoajan sekä latauskotelon mahdollistamat 20 lisätuntia. Voit myös nauttia Ambient Aware -toiminnosta, jonka ansiosta voit kuulla, mitä ympärilläsi tapahtuu samalla, kun nautit musiikista. Lisäksi TalkThru-ominaisuus mahdollistaa keskustelemisen kuulokkeita poistamatta. Muokattavien korvainserttien ja Freebit-sovitteiden ansiosta mukavat ja hyvin paikallaan pysyvät Reflect Flow -kuulokkeet tuottavat tunnusomaista, voimakasta JBL:n ääntä, joka on suunniteltu liikkuessa nautittavaksi.

Riittävästi virtaa viikon treeneihin tai koko päivän hauskanpitoon, sillä korvanapit toistavat 10 tuntia, ja latauskotelossa on lisäksi 20 tunnin edestä virtaa. 10 minuutin pikalataus palauttaa sinut peliin yhdeksi lisätunniksi.
Parempaa mukavuutta ja muokattavuutta ergonomisten silikoni-inserttien ja patentoitujen, 3 koossa saatavilla olevien Freebit™-sovitteiden ansiosta.
IP67-luokitus vedenpitävyyden ja pölytiiviyden osalta tarkoittaa kestävyyttä ja luotettavuutta kovimmissakin treeneissä kaikissa sääolosuhteissa.
Varustettu Ambient Aware -järjestelmällä, jotta tiedät ulkotiloissa paremmin mitä ympärilläsi tapahtuu, ja TalkThru-järjestelmällä, jotta voit keskustella helposti poistamatta kuulokkeita.
5,8 mm:n elementit ja JBL:lle ominainen äänentoisto lisäävät potkua soittolistoihisi.
Hallinnoi musiikkia ja soittoja helposti tai hanki tietoa ääniavustajaltasi napinpainalluksella.
Hyödynnä langattomuuden tuomaa vapautta liikkuessasi. Treenaa, kuuntele musiikkia ja hallitse puheluita vailla huolta sotkeutuvista johdoista.

FAQs & How-Tos

13 results
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  •                                                                          CLEANING THE PRODUCT V2.JPG CLEANING THE PRODUCT V3.JPG

    Use a clean cotton swab slightly moistened with alcohol to:
    1. Remove earwax and dirt from the ear tips on your earbuds.
    2. Clean the charging pads and ports on your earbuds and in the charging case respectively. Then use a dry and soft cotton to rub down the dust and lint.
    3. Clean the grooves on the cover and at the bottom of the charging case.
    After cleaning, make sure the charging case and earbuds are dry before putting the earbuds back into the charging case.

    TIP: 
    We recommend that you repeat this operation every few weeks or so to keep your headphones clean and to not affect the charging speed and quality.
  • Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • 1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
  • This headphone does not feature volume control. You must manually control volume from your device.
  • If the left ear pod is silent, please perform a new pairing with the right pod like shown in the quick-start guide.
    Take them out of the charging case and click the  center button on both the left and the right pod 3 times.
    This forces a new pairing between the pods, and the left pod should automatically pair with the right pod from now on once you remove both pods from the charging case.

    If you still cannot get the Left ear to play, please perform a factory reset by placing both pods in the charging case, while the charging case is charging. Now press the button on the right pod, and hold it for more than 5 seconds. You have now reset to factory settings. (Please note: If you have performed a factory reset, you will need to remove the headphones or "forget this device" from any smart phone or tablet they were once connected to. This will allow your device to now search for the newly restored headphones under BT devices)


    The right pod is the primary, which is connected to your source, usually a smartphone.
    The left pod is the secondary, which connects to the right pod.
     

  • If the two buds lose connection to each other, you can choose to force-pair the main/right bud to the secondary/left bud or the other way around.
    For both buds, triple-click the button on one ear bud to pair with the other ear bud.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +358 972 522 301

Monday - Friday: 10:00 - 18:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 10.00-19.00
Saturday - Sunday: 11:00-17:00