E25BT

Unfortunately if these headphones are overexposed to sweat or water, it may compromise the controls or sound quality.

Unfortunately, you cannot turn on and use the headphones while they are charging.

Yes, the E25BT features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.

You can reset the E25BT in two ways: 1: Press and hold Volume + and Volume - simultaneously for more than 3 seconds. This resets to factory settings, clearing the pairing list. 2: With unit in ON mode, plug in the USB cable. This resets the unit and puts it into charging mode.

Make sure that the device you want to connect to is on and in pairing mode. Press and hold the center button on the inline microphone for 3-5 seconds. (We recommend putting one ear tip inside your ear to hear the audio prompt) You should here "powering on.....pairing" as it searches for your device. The E25BT headphone should appear on your discoverable devices and should connect within 2-3 seconds. If you wish to pair to a different device, make sure the last device it was connected to has the bluetooth turned off. Make sure the headphones are off and press and hold the center button between 3-5 seconds or until the audio prompt states that it is "looking for device" You should be able to pair with a different device within 2-3 seconds.

No. There is no way to turn off the blue LED light from our wireless headphones unless they are turned off.