JBL Wave 200TWS

JBL Wave 200TWS

Aidosti langattomat nappikuulokkeet

Sold from 2022 until now

Getting started with your JBL Wave 200TWS

Getting started with your JBL Wave 200TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Elementin koko (mm)
8
Elementin herkkyys @ 1kHz/1mW (dB)
108
Dynaaminen taajuusvaste (Hz)
20 Hz - 20 kHz
Impedanssi (ohmia)
16
Elementtien määrä per korva
1
Latauskotelon paino (g)
39.3
Charging Case Weight (oz)
1.4
Kuulokekapselin paino (g)
8.7
Earpiece Weight (oz)
0.3
Bluetooth profiilit
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth-taajuus
2.4 GHz – 2.4835 GHz
Bluetooth-lähettimen modulaatio
GFSK, π/4DQPSK, 8DPSK
Bluetooth-lähettimen teho
0 - 12dbm
Bluetooth-versio
5.0
Latausaika (tuntia, kun akku on tyhjä)
2
Maksimi toistoaika (tuntia)
20h (5h + 15h)
Bluetooth
Kyllä
Charging cable
Kyllä
Puheääniavustaja
Kyllä
Sisäänrakennettu mikrofoni
Kyllä
Latauskotelo
Kyllä
Hands-free-puhelut
Kyllä
Ladattava akku
Kyllä
Aidosti langaton
Kyllä
Langattomat
Kyllä

Aidosti langattomat nappikuulokkeet

Räjäytä rutiinisi mahtavalla äänentoistolla! JBL Wave 200TWS -kuulokkeista kuuluu voimakas, JBL-ääni syvillä bassoilla – aitoa langatonta vapautta jopa 20 tuntia. Oma maailma mukana. Puheluita ja musiikkia voi ohjata yhdellä korvanapin kosketuksella ja saat yhteyden myös puheavustajaan. Kaksoisyhteyden ansiosta voidaan käyttää kumpaa tahansa korvanappia ja säästää akkua. JBL Wave 200TWS -kuulokkeet ovat ultrakevyet ja miellyttävät – ergonomisen muotonsa ansiosta ne ovat käyttövalmiit ja mukavat käyttää.

Musiikki nyt vain kuulostaa paremmalta JBL-kuulokkeista. Sekä koko päivä. Tunne syvältä kouraisevat bassot 8 mm:n elementtien rouhaisemina ja lisää potkua arkisiin rutiineihisi.
JBL Wave 200TWS -nappikuulokkeissa on virtaa viisi tuntia ja kotelossa sitä riittää 15 tuntia, joten ne jaksavat niin kauan kuin sinäkin. Tai kun tarvitset nopean uudelleenlatauksen, voit pikaladata akkua lisätunnilla 15 minuutissa ja täyslataukseen 2 tuntia.
Kaksoisyhteystekniikan ansiosta voit nyt vastata puheluihin tai kuunnella musiikkia kummalla tahansa korvanapilla (tai molemmilla). Valitse kumpaa käytät ja jätä toinen koteloon akun säästämiseksi.
Yksi nappikuulokkeen painallus riittää puheluiden, äänentoiston ja oman laitteen puheavustajan ohjaukseen – ja yhteys maailmaan säilyy.
Ergonomisesti muotoillut JBL Wave 200TWS -nappikuulokkeet asettuvat korviin miellyttävästi ja mukavasti korvaan sopivan puikkomaisen muotonsa ansiosta – kuuntelu on mukavaa useita tunteja. Kolmet erikokoiset korvasovitteet takaavat täydellisen tiiviyden, mikä lisää käytön mukavuutta sekä äänen selkeyttä.
Oletko valmis heittäytymään aktiiviseksi? JBL Wave 200TWS -kuulokkeilla on IPX2-luokitus; ne pysyvät menossa mukana niin rentouduttaessa kuin liikkeessäkin, kestäen kevyttä sadetta ja pientä hikoilua.
Ne kulkevat sinne, minne sinäkin. JBL Wave 200TWS -kuulokkeet ovat huomaamattomat ja kevyet niin kotelossa kuin sen ulkopuolellakin, mahtuen helposti taskuun. Värin voi valita mielialan mukaan.

FAQs & How-Tos

6 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order.
    1. Forget/unpair the headphones on your device.
    2. Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
    3. Pair the headphones to your device and see if this resolves the problem.
    4. If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
    5. Initiate a Product Reset to reset the earbud’s Bluetooth connection.
      • Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
      • Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
      • Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
      • Pair the buds to your Source Device.
  • If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +358 972 522 301

Monday - Friday: 10:00 - 18:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 10.00-19.00
Saturday - Sunday: 11:00-17:00