How To
How To
1102 results
-
What You Will Need
1x Pair of Replacement Ear Cups (Part Numbers Below)
1x Medium to Large slotted Screwdriver
Everest 300/Elite 300
SC-HM20000200-B LEATHER CUSHION (R) BLACK 300NXT
SC-HM20000100-B LEATHER CUSHION (L) BLACK 300NXT
SC-HM20000500-B LEATHER CUSHION (R) WHITE 300NXT
SC-HM20000400-B LEATHER CUSHION (L) WHITE 300NXT
Everest 700/Elite 700
SC-HM21000200-B LEATHER CUSHION (R) BLACK 700NXT
SC-HM21000100-B LEATHER CUSHION (L) BLACK 700NXT
SC-HM21000800-B LEATHER CUSHION (R) WHITE 700NXT
SC-HM21000700-B LEATHER CUSHION (L) WHITE 700NXT
Removing the Ear Cups- Place the headphones on a table and while holding the ear cup with one hand gently and slowly insert the tip of the screwdriver between the ear cup and headphones.
- Once inserted gently twist the screwdriver until there is a slight separation between the ear cup and the headphones. Note: Do not twist the screwdriver too much as this may damage the headphones.
- Continue step 1 and 2 moving the screwdriver until there is gap between the cup and the headphones all the around the cup.
Installing the New ear Cups
- Hold the ear cups tightly with one hand while holding the headphones with the other and gently pull until the cup is completely separated. Note that some headphones may have more adhesive than others so more pressure might be required to remove the ear cup.
- Find the replacement ear cup that matches the side removed (they are labeled L and R inside the cup). Align the letter in the cup so that it is legible with the bar at the top.
- Gently press the ear cup into place ensure that the pins remain aligned.
- Once there is a slight click sound press more firmly to set the ear cup into place.
Was this helpful? Thank you for your feedback! -
Resetting the Partybox to Factory Settings
- Press and hold "Play" and "Light" buttons for > 10 seconds.
- The Partybox will power off and back on and is now reset.
Was this helpful? Thank you for your feedback! -
Restore to factory settings:
In power ON mode, press and hold the Power Button for at least 10 seconds, until the volume and input selector lights begin to flash.
Reset to factory default includes Source, Volume settings, EQ settings, AirPlay name and Wi-Fi settings.Was this helpful? Thank you for your feedback! -
In power ON mode press and hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds -> Unit will power Off by itself.
Now the unit is reset to factory default.
Was this helpful? Thank you for your feedback! -
With the Flip3 ON, press the Bluetooth briefly to enter pairing mode, while another BT source that is already connected plays on. Now two sources can take turns playing, just by pressing play on one, then the other. The one being overridden will enter pause mode. For complete Bluetooth reset, while the Flip3 is ON and paired, press and hold the Bluetooth button for more than 3 seconds. The Bluetooth button light goes out, and the connection is broken. Press the Bluetooth button again for new pairing.Was this helpful? Thank you for your feedback!
-
In power ON mode press and hold the "Volume +" and "Play" buttons at the same time for more than 3 seconds -> Unit will power Off by itself. Now the unit is reset to factory default.Was this helpful? Thank you for your feedback!
-
In power ON mode press and hold the "Volume +" and "Play" buttons at the same time for more than 3 seconds -> Unit will power Off by itself. Now the unit is reset to factory default.Was this helpful? Thank you for your feedback!
-
Power on the JBL Pulse 3 For 5 seconds, press and hold the "Volume +" and "Play" buttons The JBL Pulse 3 will power off, and is now resetWas this helpful? Thank you for your feedback!
-
Press and hold the 'DAB/FM' & 'Preset 1' buttons for more than 2 seconds. The Horizon 2 is now reset to the default factory settings.Was this helpful? Thank you for your feedback!
-
Resetting the Partybox to Factory Settings
- Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
- The JBL Partybox will power off and back on and is now reset.
Was this helpful? Thank you for your feedback! -
In order to reset the headphones:
Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device.
When reseting, LED will blink faster.Was this helpful? Thank you for your feedback! -
To reset your JBL Bar 2.0 or 2.1 back to factory default settings, follow the steps below.
- Turn on your JBL Bar 2.0 or 2.1
- Press SOURCE and POWER buttons on top of the bar at the same time for more than 3 seconds.
- Your soundbar will now power off and on again.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
