JBL Tune 750BTNC

JBL Tune 750BTNC

Trådløse over-ear-hodetelefoner med ANC

Sold from 2019 until now

Getting started with your JBL Tune 750BTNC

Getting started with your JBL Tune 750BTNC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Weight (g)
220.3
Driver size (mm)
40
Driver sensitivity at 1kHz/1mW (dB)
95dBSPL/1mw
Dynamic frequency response range (Hz)
20Hz - 20KHz
Impedance (ohms)
32
Weight (g)
220
Weight (oz)
7.76
Bluetooth profiles
A2DP v1.2, AVRCP v1.5,HFP v1.6, HSP v1.2
Bluetooth frequency
2.402GHz-2.48GHz
Bluetooth transmitted modulation
GFSK, /4DQPSK, 8DPSK
Bluetooth version
4.2
Charging time (hours from empty)
2
Maximum music play time with ANC off (hours)
22
Maximum music play time with ANC on (hours)
15
Maksimum spilletid (timer)
30
Audio cable
Ja
Bluetooth
Ja
Charging cable
Ja
Sammenleggbar
Ja
Voice Assistant integration
Ja
Active Noise Cancelling
Ja
Detachable Cable
Ja
Hands Free Call
Ja
JBL Pure Bass Sound
Ja
Multi-Point Connection
Ja
Over-øret
Ja
Rechargable battery
Ja
Wireless
Ja

Din musikk, uten støy

JBL TUNE 750BTNC trådløse hodetelefoner med aktiv støyredusering og kraftig JBL Pure Bass-lyd for en altoppslukende lydopplevelse. Utformet i lett materiale som dekker øret og sørger for maksimal komfort og lydkvalitet. Hodetelefonene er kompakte og sammenleggbare, og kan lett tas med på reise. Opplading på kun to timer sørger for 15 timers batteritid med støyfri, trådløs avspilling. Hodetelefonene kan kobles til to Bluetooth®-enheter samtidig, og flerpunktsforbindelsen sørger for at du ikke går glipp av et anrop mens du strømmer musikk fra nettbrettet. La musikken fortsette å spille uten stans med den medfølgende, avtagbare lydkabelen, som forlenger støyreduseringskapasiteten med opp til 30 timer. JBL TUNE 750BTNC kommer i forskjellige farger tilpasset din personlige stil.

Fokuser på musikken. Steng støyen ute.
I over 70 år har JBL konstruert den presise, imponerende lyden som finnes på store arenaer over hele verden. Disse hodetelefonene reproduserer den samme JBL-lyden, og sender ut en bass som både er dyp og kraftig.
Du kan enkelt kontrollere lyden, administrere telefonsamtaler og aktivere taleassistenter med knappene på hodetelefonene.
2 T ladetid
Lar deg enkelt skifte fra én Bluetooth®-enhet til en annen. Du bytter for eksempel enkelt fra video på nettbrettet til telefonfunksjonen på mobilen din – slik at du aldri går glipp av et anrop.
Strøm trådløs lyd av høy kvalitet fra Bluetooth®-enhetene dine – uten rotete kabler.
Lett, kompakt og sammenleggbar design gjør at disse hodetelefonene alltid er klare til å tas med på reise hvor som helst.

FAQs & How-Tos

6 results
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.

    To connect to two devices at the same time:

    1. Power on your product.
    2. Make sure that the device you wish to connect to has the BT settings on and within range.
    3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
    4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection. 
    5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
    6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.

    (Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)


     
  • If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 
  • This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00