JBL Tune Buds 2
Helt trådløse ørepropper med støyreduksjon, JBL Pure Bass-lyd og Smart Ambient-teknologi
Getting started with your JBL Tune Buds 2
Quick Start Guide & Downloads
Product Specifications
- Størrelse på driver
- 10 mm dynamisk driver
- Motstandsfaktor for ørepropper
- IP54
- Strømforsyning
- 5 V 1 A
- Frekvensrespons
- 20 Hz – 20 kHz
- Maksimal driftstemperatur
- 45 ‹C
- Impedans
- 16 ohm
- Følsomhet
- 100 dB SPL ved 1 kHz
- Maksimum SPL
- 95 dB
- Mikrofonens følsomhet
- -38 dBV/Pa ved 1 kHz
- Ørepropp
- 5,5 g per enhet (11 g kombinert)
- Ladeetui
- 40,6 g
- Øreproppens dimensjoner (l x m x d)
- 22,9*15,6*19,7 mm
- Dimensjoner på ladeetui (l x m x d)
- 62,6*29,8*48 mm
- Bluetooth-versjon
- 5.3
- Versjon av Bluetooth-profil
- A2DP V1.4, AVRCP V1.6.2, HFP V1.8
- Frekvensområde for Bluetooth-sender
- 2,4 GHz til 2,4835 GHz
- Bluetooth-senderens effekt
- ≤ 12 dBm (EIRP)
- Bluetooth-senderens modulasjon
- GFSK, π/4-DQPSK, 8DPSK
- Type batteri for ørepropp
- Litium-ion-batteri (68 mAh / 3,85 V)
- Ladeetuiets batteritype
- Litium-ion-batteri (630 mAh / 3,8 V)
- Ladetid
- 2 timer fra tomt batteri
- Musikkavspilling med BT på og ANC av
- Opptil 12 timer
- Musikkavspilling med BT på og ANC på
- Opptil 10 timer
- Taletid med ANC av
- Opptil 6 timer
- Taletid med ANC på
- Opptil 5 timer
Ren bass, null støy
Nyt dagen én sang om gangen med JBL Tune Buds 2 ekte trådløse ørepropper og adaptiv støyreduksjon. De leverer opptil 48 timer med eksepsjonell JBL Pure Bass-lyd og JBL Spatial Sound, mens den ergonomiske (og vann- og støvavvisende) designen gir deg komfort hele dagen i all slags vær. Nyt perfekt lydende samtaler uten omgivelsesstøy, alt administrert ved hjelp av intuitive berøringskontroller. Med adaptiv støyreduksjon og Smart Ambient-teknologi kan du stenge verden ute, eller velge hvor mye du engasjerer deg i omgivelsene dine. Du kan til og med tilpasse lydopplevelsen din med JBL Headphones-appen og skreddersy lyd rundt deg med Personi-Fi 3.0. Kom innom JBL Tune Buds 2 og opplev verden på din måte.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00