JBL Partybox 310
|Maximum music playing time (hrs)||18|
|Output power (W)||240|
|Dynamic frequency response range (Hz)||45 Hz - 20 KHz (-6 dB)|
|Dimensions (cm)||68.8 x 32.6 x 36.8|
|Dimensions (in)||27 x 12.8 x 14.5|
Control Connect Specifications
|Bluetooth profiles||A2DP 1.3, AVRCP 1.6|
|Bluetooth frequency||2.4 – 2.48GHz|
|Bluetooth transmitted modulation||GFSK, π/4 DQPSK, 8DPSK|
|Bluetooth transmitter power||15dBm (EIRP)|
Documents & Downloads
What’s in the Box
- 1 x JBL Party Speaker 310
- 1 x Quick-Start Guide
- 1 x Warranty Card
- 1 x Safety Sheet
- 1 x AC Power Code (AC Plug varies by Region)
FAQs & How-Tos
Is this Partybox Supported by the JBL Partybox App?This model is supported by the JBL Partybox App.
Download the JBL Partybox App from the App Store or Google Play Store and install it to use the following features:
SETTINGS: OTA update | Firmware Version | Quick Start Guide
REMOTE CONTROL: Music playback – Play/Pause & Skip Track | Karaoke – Bass/Treble/Echo | DJ sound effect – Here you can swap which samples will play when you hit the three Sound Effect buttons on the top panel, or play all of the available sounds on one screen | Top panel control | Source select | Bass Boost – On/Off
LIGHT SHOW: Fully customize your light show in real time – Change light themes and animations to suit your mood | Turn animations on or off | Turn the strobe on or off | Customize color (preset or color palette) | SOLO mode
GET LOUD: Connect in TWS, switch Stereo channels and enable Party Mode
PartyBox TWS InformationIt is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.
Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).
A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.
Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).
TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.
Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the Partybox 110, 310 or 710 (only) together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.
Partybox 110 - Firmware Version 1.28.0/Partybox 310 - Firmware Version 1.32.0What’s New:
The new Software version will enable Party mode across PartyBox 310 & PartyBox 110 series.
Stereo mode will still only work when 2 PartyBoxes of the same model are connected.
Connecting to your Car
It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )
How to play music through using a USB stick
- Get an empty stick with speed of 2.0.
- Make sure it is formatted with FAT16 or FAT32.
- Your Music files can only be: (32-320kbit/s), (32-320kbit/s) and (44.1K/48K/192K).
- The Partybox supports up to 8 subfolders.
- It will be played in alphabetic sequence with main folders first then subfolders.
- To skip songs forward, double press the Play/Pause button. To skip back, triple press the Play/Pause button.
Wireless Microphone Information
The JBL Wireless Microphone set allows 2 x wireless microphones* to be connected to any Partybox model through the use of a dongle connected to the Mic/Guitar jack input. Additionally, a 3rd wired microphone - like the JBL PBM100 Wired Microphone, can also be connected to the switchable Guitar/Mic 2 input (available on the Partybox 310). This will also work when using the non-switchable Guitar input on other Partybox models - however, this will bypass the karaoke effects including echo for the connected microphone and would generally have a slightly different sound character/timbre to a microphone connected to the Microphone input.
*This includes the Partybox On-The-Go, a maximum of 2 wireless microphones can be connected and used simultaneously. The standard bundled Partybox On-The-Go microphone can only be connected to the Partybox On-The-Go that it came bundled with, it also cannot connect wirelessly to any other Partybox models or portable speakers other than the Partybox On-The-Go that it came bundled with. Only one standard, bundled Partybox On-The-Go wireless microphone can be connected at a time, unless the JBL Wireless Microphone is purchased (sold separately), a spare part will only work as a replacement, not simultaneously.
PartyBox Model Mic Arrangement Ports Used MAX 100/110 1 Wired OR 2 Wireless (dongle) Mic Port 2 200 1 Wired OR 2 Wireless (dongle) Mic Port 2 300 1 Wired OR 2 Wireless (dongle) Mic Port 2 310/310 MC* /710 1 Wired AND 2 Wireless (dongle) Mic Port AND Mic/Guitar Port 3 1000 1 Wired OR 2 Wireless (dongle) Mic Port 2 On The Go 1 Wired AND 1 Wireless (pre-paired)
2 Wireless (dongle)
Mic Port AND Paired
Mic Port (pre-paired microphone will not work simultaneously when dongle used)
* Partybox 310 MC - is a standard Partybox 310, which comes bundled with 1 x Wired Microphone (PBM100).
Which Connections are Possible
Connecting a USB stick
- You can enjoy music from your USB Stick directly into the Partybox device.
- Insert the Stick into theport, located on the back of your Partybox.
- The USB Stick has to be formatted FAT16 or FAT 32 and supports MP3, WAVE and WMA Music files.
- It will start automatically playing the content on your USB stick.
- You can connect any devices through the analog connection
- Use an analog cable (Not included in the box) and connect your device.
- Press play on your external device and enjoy the music!
RCA Connection (*Partybox 200/300/1000 Only)
- The Partybox features both Input and Output RCA connection.
- Connect your RCA cable (not included) to either one of the ports.
- You can use it with your DVD/BlueRay player or AVR system.
Guitar and Microphone
- Connect your to the dedicated port or connect your electric to the
- You can mix sound or make your own karaoke party with your Partybox.
- Sing or play through your devices.
- To adjust the volume of the audio source, press volume+ or volume- buttons.
- To adjust the volume of the microphone or guitar, rotate the or
Charging external devices
- Whenever your mobile device needs some extra power, the Partybox can help you!
- Featuring a USB Charging port for both Music (USB on a stick) or when you need to charge your device.
- Simply connect your device to the port and start charging.
- NOTE: The Partybox 200 needs to be connected to AC power all the time to charge or function as a speaker.
- The Party 300/310 has a battery and can charge any device without needing AC power (unless the product's battery is depleted then you need to recharge via AC power).
There are many ways to enjoy your JBL Partybox On-The-Go, 100, 200, 300, 310 & 1000. The options are endless and you are in control of the party
TWS Mode Capabilities and Restrictions
You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
Speaker Phone InformationThis model does not feature an internal speaker phone and cannot be used for phone calls or other VoIP systems.
Partybox Connection Information
The Partybox 310 cannot connect to other Partybox models such as the Partybox 100, 200, or 300 via TWS connection. The Partybox 310 can only connect to another Partybox 310 with TWS connection.
Unlike the Partybox 200 and 300, the 310 does not feature RCA connections.
Please Note however, that if you have multiple different Partybox models, connection via Daisy Chain using the Aux In/Out or RCA In/Out connections is possible. To connect a Partybox 300 with a Partybox 310 for example, you would need an RCA to Aux cable or an adapter. The Partybox 100 and Partybox On-The-Go only have Aux in connections, so this would need to be at the end of the Daisy Chain.
Functionality of Bass/Treble/Echo ButtonsThe Bass, Treble and Echo buttons on the control panel on top of the Partybox only applies these EQs/effect to the Microphone inputs on the rear of the speaker - for Karaoke use. The EQs and Echo effect cannot be applied to other sources or inputs such as Bluetooth, Aux or USB.
If more bass is desired, there is a Bass Boost button on the top control panel (with 2 levels of Bass Boost: Off, Level 1 & Level 2, switched through pressing the button multiple times). This will be applied to the sources and inputs mentioned above (but not the microphone inputs).
How to Reset to Factory Settings
Resetting the Partybox to Factory Settings
- Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
- The JBL Partybox will power off and back on and is now reset.
Can’t find what you’re looking for?
Please note that UK delivery times are up to 5 working days.