JBL Authentics L8
Kaksitie-kaiutinjärjestelmä langattomalla suoratoistolla
Sold from 2014 until 2017
Made in: | Hong Kong |
---|
Getting started with your JBL Authentics L8
Documents & Downloads
Product Specifications
- Amplifier Power
- 4 x 30W RMS
- Frequency Response
- 55Hz – 35kHz
- Signal-to-Noise Ratio
- 92dB
- High Frequency Transducer
- 25mm tweeter
- Low-Frequency Transducer
- 4 inch woofer
- Maximum SPL
- 104dB @ 1m
- Speaker Width (mm)
- 664
- Speaker Depth (in)
- 13
- Speaker Width (in)
- 26-1/5
- Speaker Height (in)
- 9-2/3
- Speaker Weight (kg)
- 7.4
- Speaker Weight (lb)
- 16.31
- Speaker Height (mm)
- 246
- Speaker Depth (mm)
- 329
Uncompromising sound. Versatile connectivity.
Tyylikäs ulkomuoto. Laadukas ääni. Langaton käyttö. Yksinkertainen: JBL Authentic L8 muuttaa äänenlaadun pysyvästi. Legendaarisen JBL Century L100 -kaiuttimen inspiroima JBL Authentic L8 yhdistää klassisen akustisen kaiutinsuunnittelun edistykselliseen langattomaan äänen suoratoistoon. L8:n urheilullisen kiiltävä musta puukotelo tarjoaa ensiluokkaisen äänenlaadun ja mahdollistaa langattoman yhteyden erilaisiin laitteisiin AirPlay-, DNLA- ja Bluetooth®-yhteyksillä. Near Field Communication (NFC) -teknologian avulla voit parittaa Bluetooth- laitteen yksinkertaisesti koskettamalla laitteella kevyesti kaiutinta. Ilmaisen JBL MusicFlow -sovelluksen avulla voit helposti valita asetukset ja säätää kaiutinta iOS- tai Android-mobiililaitteilla. Se on yhtä monipuolinen kuin helppo: voit ladata langattomasti yhteensopivia mobiililaitteita lisävarusteena saatavalla Qi-latausalustalla tai ladata laitteita, tabletit mukaan lukien, sisäänrakennettuja USB-portteja käyttäen. 120 W RMS teho, räätälöidyt JBL basso- ja diskanttielementit, edistyksellinen DSP-teknologia ja taajuusvaste 50 Hz – 35 kHz, saavat JBL Authentic L8:n tuottamaan täydellisen äänen ja laajan stereokuvan yhdestä stereokaiuttimesta. Harman Clari-Fi™ -teknologia korvaa nykyisten pakattujen musiikkitiedostojen puutteet lisäämällä yksityiskohtia ja dynamiikkaa kaikkeen heikkolaatuisesti koodattuun musiikkiin.. JBL Authentic L8 on täydellinen ratkaisu kaikkiin äänilähteisiin, ihanteellinen äänijärjestelmä kaikkiin kuuntelutiloihin.
FAQs & How-Tos
-
Yes it is possible to reset your speaker. The reset will remove all Bluetooth pairings and WiFi network settings. In power ON mode, press and hold the Power Button for at least 10 seconds, until the volume and input selector lights begin to flash. Your JBL Authentics L8 or L16, are now back to factory settings. Please reconnect the speaker to your WiFi network again.Was this helpful? Thank you for your feedback!
-
Restore to factory settings:
In power ON mode, press and hold the Power Button for at least 10 seconds, until the volume and input selector lights begin to flash.
Reset to factory default includes Source, Volume settings, EQ settings, AirPlay name and Wi-Fi settings.Was this helpful? Thank you for your feedback! -
If I have a JBL Authentics L8 or L16 that is connected to Wi-Fi, do I need an Adapt to stream to it?Yes, you will need to connect an Adapt to stream music to the JBL Authentics products.Was this helpful? Thank you for your feedback!
-
With the release of v.3.0 of the JBL Music app, owners of the JBL Authentics L8 and L16 are now greeted with a message that an update is available. If you own one of these speaker systems, and you know that it already supports Spotify Connect, the update firmware is already installed, and you can ignore this message. If your speaker system does not already support Spotify Connect, the update is available for you, but you cannot perform it yourself, it must go to a service center to be updated. Please contact Harman Helpdesk or the distributor in your country for advice regarding servicing.Was this helpful? Thank you for your feedback!
-
If you are experience connectivity problems with Wi-Fi connection, please try to reset all Wi-Fi settings. This can be done by pressing power button for 10 seconds, the power button will quickly flash to indicate it has been reset. After you have reset all Wi-Fi settings, please shutdown the device and pull out the power cable from the wall socket. Put back in the power cable into the wall socket and try do the Wi-Fi setup again.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+358 972 522 301
Monday - Friday: 10:00 - 18:00
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00