JBL Authentics L16
Kolmitie-kaiutinjärjestelmä, jossa langaton suoratoisto
Sold from 2014 until 2017
Made in: | Hong Kong |
---|
Getting started with your JBL Authentics L16
Documents & Downloads
Product Specifications
- Apple AirPlay
- Bluetooth
- Amplifier Power
- 6 x 50W RMS
- Frequency Response
- 35Hz – 35kHz
- Signal-to-Noise Ratio
- 92dB
- High Frequency Transducer
- 25mm tweeter
- Mid-Range Transducer
- 2 inch mid range
- Low Frequency Transducer
- 5.25 inch woofer
- Maximum SPL
- 108dB @ 1m
- Speaker Depth (mm)
- 369
- Speaker Weight (kg)
- 13.3
- Speaker Height (in)
- 11-3/5
- Speaker Depth (in)
- 14-1/2
- Speaker Weight (lb)
- 36
- Speaker Width (in)
- 32-1/5
- Speaker Height (mm)
- 294
- Speaker Width (mm)
- 710
Classic sound. Wireless freedom.
Legendaarinen ääni yhdistyy moderniin liitettävyyteen. Yhden kotelon kaiutinjärjestelmällä ja langattomalla äänen toistolla JBL Authentic L16 on syntynyt uudistamaan. Legendaarisen JBL Century L100 -kaiuttimen inspiroima JBL Authentic L16 yhdistää klassisen akustisen kaiutinsuunnittelun pitkälle kehittyneeseen langattomaan teknologiaan. Viimeisteltynä aidolla pähkinäpuuviilulla ja varustettuna legendaarisella JBL-äänellä se tarjoaa helpon langattoman liitettävyyden erilaisiin laitteisiin AirPlay-, DNLA- ja Bluetooth®-yhteyksillä. Sen lisäksi siinä on analoginen ja optinen liitäntä sekä esivahvistimella varustettu levysoitinliitäntä. Tuloksena on kaiken kattava ja yhteensopiva järjestelmä. Se on yhtä kätevä kuin tehokas: Near Field Communication (NFC) -teknologian avulla voit parittaa Bluetooth®-laitteen yksinkertaisesti koskettamalla laitteella kevyesti kaiutinta. Ilmaisen JBL MusicFlow -sovelluksen avulla voit helposti asettaa ja säätää kaiutinta iOS- tai Android-mobiililaitteista. Kaiuttimen sisäänrakennetuilla USB-porteilla voit ladata yhteensopivat mobiililaitteet. Urheilullinen 300 W RMS-teho, räätälöidyt JBL basso- ja diskanttielementit, edistyksellinen DSP-teknologia ja taajuusvaste 35Hz – 35kHz saavat JBL Authentic L16:n tuottamaan täydellisen äänen ja laajan stereokuvan yhdestä keskikokoisesta stereokaiuttimesta. Harman Clari-Fi™ -teknologia korvaa nykyisten pakattujen musiikkitiedostojen puutteet lisäämällä yksityiskohtia ja dynamiikkaa kaikkeen heikkolaatuisesti koodattuun musiikkiin. Pitelemättömän akustiikka ja kaiken kattava yhteensopivuus tekevät JBL Authentic L16:sta tulevaisuuden klassikon.
FAQs & How-Tos
-
Yes it is possible to reset your speaker. The reset will remove all Bluetooth pairings and WiFi network settings. In power ON mode, press and hold the Power Button for at least 10 seconds, until the volume and input selector lights begin to flash. Your JBL Authentics L8 or L16, are now back to factory settings. Please reconnect the speaker to your WiFi network again.Was this helpful? Thank you for your feedback!
-
Restore to factory settings:
In power ON mode, press and hold the Power Button for at least 10 seconds, until the volume and input selector lights begin to flash.
Reset to factory default includes Source, Volume settings, EQ settings, AirPlay name and Wi-Fi settings.Was this helpful? Thank you for your feedback! -
If I have a JBL Authentics L8 or L16 that is connected to Wi-Fi, do I need an Adapt to stream to it?Yes, you will need to connect an Adapt to stream music to the JBL Authentics products.Was this helpful? Thank you for your feedback!
-
With the release of v.3.0 of the JBL Music app, owners of the JBL Authentics L8 and L16 are now greeted with a message that an update is available. If you own one of these speaker systems, and you know that it already supports Spotify Connect, the update firmware is already installed, and you can ignore this message. If your speaker system does not already support Spotify Connect, the update is available for you, but you cannot perform it yourself, it must go to a service center to be updated. Please contact Harman Helpdesk or the distributor in your country for advice regarding servicing.Was this helpful? Thank you for your feedback!
-
If you are experience connectivity problems with Wi-Fi connection, please try to reset all Wi-Fi settings. This can be done by pressing power button for 10 seconds, the power button will quickly flash to indicate it has been reset. After you have reset all Wi-Fi settings, please shutdown the device and pull out the power cable from the wall socket. Put back in the power cable into the wall socket and try do the Wi-Fi setup again.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+358 972 522 301
Monday - Friday: 10:00 - 18:00
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00