JBL Control X Wireless

JBL Control X Wireless

Tehokkaat ja laajennettavat langattomat Bluetooth®-stereokaiuttimet, kotiin tai tien päälle

Getting started with your JBL Control X Wireless

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Finish
Graphite / White / Red
Rated Power
30W per channel RMS (AC mode)
Signal-to-noise ratio
>75 dB
Power supply
AC 100-240 VAC, 50-60Hz
Battery Type
Lithium-ion Polymer (7.4V, 2600mAh)
Battery Charge Time
2.4 hours @ 0.5C
Playback Time
Up to 4 hours (varies by volume level and audio content)
Bluetooth® Transmitter Power
0-4 dBm
Bluetooth® Transmitter Frequency Range
2.402 – 2.480 GHz
Bluetooth® Transmission Range
Up to 10m (from source)
Speaker Range
Up to 30m (between primary and secondary speakers)
Dimensions
9-1/4" x 6-1/2" x 6-1/4" (235mm x 165mm x 159mm)
Frequency Response
62Hz - 20kHz (-6db)
Weight (kg)
2.95 kg
Weight (lb)
6.5 lbs
High-Frequency Transducer
1" (25mm) CMMD® Lite dome tweeter

Rock the house inside and out

Vie suosikkimusiikkisi, -videosi, -TV-ohjelmasi tai -pelisi uudelle tasolle palkituilla JBL Control X Wireless -kaiuttimilla. Tämä kannettava Bluetooth® -kaiutinpari tarjoaa kiehtovaa stereoääntä ilman johtoja tai kaapeleita minkään kaiuttimen välillä. Nämä pienikokoiset kaiuttimet on suunniteltu tarjoamaan uskomatonta tehoa ja suorituskykyä mihin tahansa kotisi huoneeseen. Ja kun on aika viedä juhlat ulkoilmaan, niiden kestävä rakenne on riittävä kohtamaan vauhdikastakin menoa. Jos tarvitset laajempaa äänen kattavuutta, lisää vain ylimääräinen Control X Wireless -kaiutinpari (myydään erikseen) samanaikaista toistoa varten jopa 4 kaiuttimelle.

Suoratoista Bluetooth® välityksellä tai käytä takaosassa olevia 3,5 mm tuloliitäntöjä stereo- tai mono-kuunteluun. Toisin kuin muiden stereokaiuttimien osalta, et tarvitse kytkentäkaapeleita tai johtoja minkään kaiuttimen välillä. Käytä yhtä tai molempia kaiuttimia kotisi sisä- tai ulkopuolella ilman lähettimen tai kiinteän kaapeliyhteyden aiheuttamia rajoituksia.
Ole bileiden valopilkku loihtimalla kuuluviin 30 wattia estotonta tehoa kustakin kaiuttimesta. Siinä missä useat muut aktiivikaiuttimet vääristävät ääntä korkeilla tasoilla, JBL Control X Wireless -kaiuttimet takaavat puhtaan ja vääristymättömän äänen kaikilla voimakkuuksilla. Anna äänesi kuulua voimakkaana ja selkeänä.
Kuule totuus. Tämä patentoitu ääniohjaustekniikka tarjoaa saman luonnollisen stereo-kuvan ja yksityiskohdat, jotka löytyvät maailman tunnetuimmissa studioissa, klubeissa, konserttitaloissa, teattereissa, areenoilla ja stadioneilla. Yksinkertaisesti sanottuna JBL Control X Wireless -kaiuttimet on suunniteltu loihtimaan eteesi live-esitys.
Olemme omistautuneet bassoäänille. JBL omaa rikkaan historian kaiutinelementtien ja akustiikan suunnittelussa ja se näkyy Control X Wireless -kaiuttimessa. Olemme tarkoituksellisesti käyttäneet jäykkää kartiomateriaalia, joka toimii yhdessä patentoidun Slipstream-viritetyn portin kanssa. Tuloksena on tiukasti iskevät rytmit genrestä riippumatta.
JBL Control X Wireless -kaiuttimet rakennettiin tarjoamaan parasta musiikkia kuuntelutilasta riippumatta. Nämä kaiuttimet saavat kotisi tai liiketilasi värähtelemään, kuin myös  kadun, puiston, leirintäalueen, rannan, tai sosiaalinen tapahtuman. Takana sijaitseva refleksiaukko toimii lisäksi kantokahvana.
Voit käyttää neljää Control X Wireless -kaiutinta toimimaan keskenään ja tuottamaan super-kokoisen stereon tai summatun monon laajalle kuuntelualueelle ilman ylimääräisiä johtoja kaiuttimen välillä (ylimääräinen pari myydään erikseen).

FAQs & How-Tos

16 results
  • No. Although the Control X Wireless have a rugged exterior and are portable, they are not all-weather speakers. Any direct exposure to harsh weather condition (rain, snow, extreme hot/cold temperatures) will damage the speakers.
  • No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.
  • Please note that although the Wireless version of Control X does have a threaded insert for brackets, JBL offers no brackets. The brackets for the Control X passive model cannot be used with the wireless version. Brackets for the wireless version must be custom made.
  • Yes, on the master speaker (the one with playback buttons), simply press the Reverse and Forward Play buttons at the same time for 3 seconds. Please note that after you have performed the reset procedure, master and secondary speakers are no longer connected. Go to the owner's manual page 4, the section "speaker association", to pair the secondary and master again.
  • Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Control Xstream also offers a Bluetooth connection and an AUX input
  • No, the connection between our Control XT wireless speakers are established through Wi-Fi connection, running on 2.4 GHz network. The only time you will use Bluetooth, is when you connect to the primary speaker and start streaming music.
  • Random flashing is an indication that the wireless link between primary and associated speakers was lost and recovered. If this happens too often, it may be caused by interference in the 2.4 GHz ISM band, caused by overcrowding of the band. Sometimes it helps to change location of the speakers, or to shut down other 2.4 GHz devices.
  • Look at the back of the primary speaker, which is the one with pause/play and volume controls. You will see a switch called "mode". This switch can be in either S or P position. S stands for Secondary, P stands for Primary. Switch to Primary, and your speaker will now open Bluetooth and will accept analog signals. (The Secondary position is used for systems where four speakers are in use, since only one speaker can act as primary speaker.)
  • Our Control X Wireless speakers use Wi-Fi 2.4 GHz network to connect them. If there are any obstacles or people blocking the connection, it can cause interference. We suggest positioning the speakers on a high-level surface or shelf, to avoid any interference.
  • When the secondary speaker gets out of range, audio disappears, but there is no indication that the transmission is out of range, other than silence. Once they get within range again, the front panel LED blinks a few times, indicating that connection has been re-established. During normal operation, random blinking can be experienced, which is an indication of the wireless link having recovered from interference.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +358 972 522 301

Monday - Friday: 10:00 - 18:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 10.00-19.00
Saturday - Sunday: 11:00-17:00