JBL Tune 110
In-ear-kuulokkeet
Sold from 2016 until now
Getting started with your JBL Tune 110
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Elementin koko (mm)
- 9.0
- Number of Microphones
- 1
- Elementin herkkyys @ 1kHz/1mW (dB)
- 96.0
- Dynaaminen taajuusvaste (Hz)
- 20 Hz - 20 kHz
- Impedanssi (ohmia)
- 16.0
- Elementtien määrä per korva
- 1.0
- Kuulokejohdon pituus (cm)
- 111.3
- Kuulokejohdon pituus (ft)
- 3.65
- Kuulokejohdon pituus (m)
- 111.3
- Paino (g)
- 12.7
- Paino (oz)
- 0.45
- Dynaaminen taajuusvaste (Hz)
- 20 Hz - 20 kHz
- Sisäänrakennettu mikrofoni
- Kyllä
- Litteä sotkeutumaton kaapeli
- Kyllä
- Hands-free-puhelut
- Kyllä
- JBL Pure Bass -ääni
- Kyllä
- Pikalataus (5 min = 1 tunnin soittoaika)
- Ei
Basso, joka rokkaa, ja tempaa heti mukaansa.
Esittelyssä JBL TUNE110 in-ear -kuulokkeet. Ne ovat kevyet, miellyttävät ja kompaktit. Lujatekoisissa korvanapeissa on 9 mm elementit, jotka saavat aikaan voimakkaan bassovasteen. Ne tarjoavat tehokkaan JBL Pure Bass -äänen, jota olet kenties kuullut konserttihalleissa, areenoilla ja äänitysstudioissa eri puolilla maailmaa. Lisäksi yksipainikkeinen sotkeutumattomassa kaapelissa sijaitseva kauko-ohjain antaa sinun hallita musiikin toistoa ja vastata puheluihin lennossa sisäänrakennetun mikrofonin avulla. Tämä tekee JBL 110 -kuulokkeista jokapäiväisen kumppanisi olitpa sitten töissä, kotona tai tien päällä.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
The USB charging port will be located on the inline microphone located on the RIGHT side of the earphones.Was this helpful? Thank you for your feedback!
-
To power on the headphones, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audio chime and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the T110BT headphone. Once you select that option, you will hear the confirmation tone. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible tone and then the confirmation chime once it is connected. You will see the Bluetooth light alternate between red and blue when it is in pairing mode and then to a slow blinking LED blue light once it is connected to your device.Was this helpful? Thank you for your feedback!
-
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00
