JBL Quantum 350 Wireless
Windows-tietokoneille suunniteltu langaton pelikuulokemikrofoni irrotettavalla sankamikrofonilla
Sold from 2021 until now
Getting started with your JBL Quantum 350 Wireless
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Weight (g)
- 252
- Elementin koko (mm)
- 40
- Aktiivinen taajuusvaste
- 20 Hz – 20 kHz
- Elementin herkkyys @ 1kHz/1mW (dB)
- 115 dB SPL @1 kHz
- Dynaaminen taajuusvaste (Hz)
- 20 Hz - 20 kHz
- Impedanssi (ohmia)
- 32
- Syvyys (cm)
- 2.5
- Ear Cup Depth (in)
- 1
- Korkeus (cm)
- 10.2
- Ear Cup External Height (in)
- 4
- Leveys (cm)
- 8.9
- Ear Cup External Width (in)
- 3.5
- Sisäinen Leveys (cm)
- 6.1
- Ear Cup Internal Height (in)
- 2.4
- Sisäinen korkeus (cm)
- 4.9
- Ear Cup Internal Width (in)
- 1.9
- Kuulokejohdon pituus (m)
- 1
- Headphone Cable Length (ft)
- 3.3
- Latausaika (tuntia, kun akku on tyhjä)
- 2
- Maksimi toistoaika (tuntia)
- 22
- Charging cable
- Kyllä
- Sisäänrakennettu mikrofoni
- Kyllä
- Over-ear
- Kyllä
- Ladattava akku
- Kyllä
- Langattomat
- Kyllä
Ääni on kaikki kaikessa
Oletko valmis siirtämään pelaamisesi uudelle tasolle? Esittelyssä JBL Quantum 350 Wireless -pelikuulokemikrofoni. Kaikkein hiljaisimmista askelista voimakkaimpiin laserpamahduksiin – JBL:n QuantumSOUND Signature asettaa pelaajan kaiken keskipisteeseen. Irrotettavan ja suuntaavan, puheääntä painottavan sankamikrofonin ansiosta muut pelaajat kuulevat sinut aina selkeästi, meni homma miten hurjaksi tahansa. Häviöttömän langattoman yhteyden, 22 tunnin akunkeston ja kevyiden mukautuvien vaahtomuovikorvatyynyjen ansiosta melskeestä ei mene ohi sekuntiakaan pisimpienkään pelisessioiden aikana. Windows-tietokoneille suunniteltu JBL QuantumENGINE -ohjelmisto hienosäätää äänentoistoa – antaen huipputason kilpailuedun. Vastustajasi eivät tule tajuamaan, mikä heihin osui.
FAQs & How-Tos
-
Yes, you can use the headset while charging!Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
To reset a Quantum headset, you need to connect the product to your computer and open the QuantumEngine.
When you have the QuantumEngine open, go to the "System Software" tap and press "Restore Factory Settings".
Only products that are compatible with the QuantumEngine can be reset this way.
Was this helpful? Thank you for your feedback! -
You might have to add a USB extension dock to get the JBL Quantum 350/600/800/810 dongle as close to the headset, or place the common sources of interference (e.g. routers, Wi-Fi speakers etc.) as far from the JBL Quantum 350/600/800/810 dongle.
Was this helpful? Thank you for your feedback! -
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
How to check your PC settings for the correct recording device
1. Go to Control Panel
2. Select Hardware and Sound
3. Click on Sound
3 Select Recording
4. Make sure to select the proper recording device.-
Right-click on it Quantum headset.
-
Now select "Set Default Device" or Select "Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
6. Choose Levels.
7. Adjust accordingly.
Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)Was this helpful? Thank you for your feedback! -
-
Try a manual pairing of the headset and the dongle.
Hold the power button in the "On" position for 5 seconds on the headset, and then hold the button on the dongle for 5 seconds. This should force a manual pairing, allowing the PC to again recognize the headset.
Be sure to check multiple USB ports (to confirm it’s not an issue with the USB port).
If the dongle can’t be manually paired either, please contact customer support.
Was this helpful? Thank you for your feedback! -
The JBL Quantum 350 Wireless headset is compatible via 2.4GHz wireless connection with:
- PC
- PlayStation
- Mac
- Nintendo Switch.
Was this helpful? Thank you for your feedback! -
QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1511
Release Date: September 19, 2022
Release Media: Website & Quantum ENGINE
What’s New- Improved firmware stability upgrading process flow for the QUANTUM 910.
------------------------------------------------------------------------
------------------------------------------------------------------------
QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1510
Release Date: August 24, 2022
Release Media: Website & Quantum ENGINE
What’s New- Added support for the new QUANTUM 910 Wireless Headphones
- Over 30 improvements addressing user interface, usability, and stability of the app for a better user experience.
Was this helpful? Thank you for your feedback! -
QUANTUM ENGINE
Software Update Release Notes
Version 1.6.0.1053
Release Date: 1/21/21
-
Welcome feature has been implemented.
-
Surround Modes feature has been implemented.
-
ANC/TT toggle has been implemented.
-
The sidetone has been turned off by default for all models to avoid confusion.
-
QuantumSURROUND/QuantumSPHERE quality & performance have been improved.
-
Quantum 300 Mic Gain has been improved.
-
Quantum 800 FW update reliability has been improved.
-
Minor Bugs Fixed
Was this helpful? Thank you for your feedback! -
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00
